Search results

Thanks all, just wanted to close this out. turns out fuse wasnt bad or anything else, I opened the fusebox and just pushed it, guess it rattled its way lose maybe? seems odd... but its working again and thats all I did.

Thanks, I will check the fuse first, will pop it out and go get another one to see if thats issue, fingers crossed. if its the relay in the roof on a 1 year old tractor im going to be pissed :P

Have not, I looked at it but not sure how i would check if its good lol im not real technical

Thanks but the light would illuminate when the button is pressed wouldnt it? it just wouldnt provide the ac or does it have some type of chec for that?

Good day, I noticed it was hard to defog my tractor then realized the light wasnt on for my ac like usual when you turn on the defrost. made sure the button was pressed in, but no light. I also dropped rpm turned it off and on to confirm its not working, as the tractor will drop rpm a bit when...

Thanks, Ya it doesn't seem to power without ignition on so thats out, luckily blocker heater was on so it started, ill run it for a while to let it charge up. when I get it opened somehow I will definitely add a charging cable for the future.

Good Day, for some reason my hood will not open when pulling the rid on my new CK610SE and we just had 2 days of -42 so I need to charge my battery. I assume like any other vehicle its ok to charge through the 12V accessory port in the cabin? also if anyone has had this cheap rod not open...

Here we have it, someone finally put a video on youtube

agreed but one shouldnt have to guess which value is the misprint :)

Apologies if the video doesnt the link to it is on this post in the Kioti Tuning FB group https://www.facebook.com/groups/4665848363426884/posts/4932913996720318/

Wanted to share some more videos I found on facebook from people who did this. also some posts on the kioti facebook tuning group around this, seems everyone is just turning the screw a turn or 2 and mention it is immediately noticeable especially on hills.

gentlemen on Kioti Facebook group provided the following incase anyone else was looking 2 head lights H7’s 2 lower cab lights R5W’s 4 work lights H3’s

definitely lol smells like a new car right now :) snow just starting to melt so property is too soggy im just itching to get t work!

Ya I had one on my massey gc1710 took a while to get used to, but even with changing position its so good especially when doing loader work.

ahh it looks close in the pic angle, its actually not but ill go reinspect to make sure ! thanks

Thanks, I certainly dont want to compromise anything, the work lights are likely more important than the headlights since they are blocked mostly by the loader. I would change all but certainly dont want water getting in there.

Has anyone found direct replacement bulks for the CK bulks? the stock ones arent great would love to upgrade "easily" if there are just bulb replacements for the existing hardware. Tractor and work lights?

Well after a lot of research and checking the LX2610cab vs the CK2610SE I bought the 2610SE, she arrived tonight. So much value in comparison and so many more features. I got third function, loaded rear tires, spacers, HLA 2500 hydraulic plow, 60" hydraulic snowblower and a box blade. traded...

Thank you very much for the confirmation ! I ordered the brackets but wont need to rush to buy a stereo now :)

Found this site which makes kits so you can hook up any stereo easy https://farmradiosupply.com/kioti_tractor_radio.html

My tractor has no radio, I did not buy one. it has the AUX on the console to plug in. I did not buy the radio so was looking for feedback on the aux jack specifically. apologies for the confusion.

Thanks for the feedback! if it plays music and i can hear it loud enough im good :)

Good Day, I just ordered a new ck2610SE and I didnt buy a radio as I saw it had an AUX port which is what I would want ideally to be able to play music off my phone. I was watching a video and the guy mentioned the AUX does not work well at all, anyone tried this out and could share how it...

Hey all, just purchased a new CK2610SE. I traded up from my massey FC1710TLB. I have 4 acres on a hill to the water and needed something larger to maintain road down to the beach and continue building our property down there. Looking forward to getting it home in a few weeks, test drive it felt...

Ya, the SE/CAB adds quite a bit the SE is a bit more by design + cabs usually another 10K so it may be in line

Hey there, just got a quote for a 2610cab here in New Brunswick Canada, came in around 40K before tax with loader. that sound about right? appreciate if anyone knows

So your thinking the CK/CX2510 still has this de-tuned 35hp ? big engine for small tractor I like it :)

Also different, WM instead of WH 87 CI versus 100.7

i suspect its the exact same engine but with the AC setup

I pulled that off the Kioti website

Agreed, I noticed that exact thing on some videos, even 2-3hp could change those characteristics I would think, but I know little about this stuff, why i come here :)

Not a lot of great videos or reviews out there. comparing to a Kioti CK2610 at the moment, outside of GP outdoors who is awesome, not much for longer term reviews out there. the HST whine is a little concerning, given other models dont seep to be as prevalent

Whats your property type with it? got any videos?:)

Agreed, would love to see details and long term results

Just wanted to share this guys video i came across on youtube, very well done and the tractor vendor was SUPER confident and knowledgeable in his explanation, super well done video for anyone hunting good info on this model.

Thanks, seems odd they havnt fixed that after all these years as the soon to be #3 tractor in the US but agreed does seem like a typo. I have seen alot of people mention being able to dial some screw to get more power out of the CK but never the CX and the engine model itself is different too...

Hey all, I have seen many threads but no real conclusion. Both the CX2510 and CK2610 have the same CC of 1600 the website claims but the CX has an 87CU engine and the CK2610 has a 105CU I will start by the fact I am not mechanically included, own a massey GC and upgrading in spring, but...

Thank you so much, great info! feeling much more confident, i only have 4 acres but i like to maintain it myself, no plow truck would be doing this road and i think the CK2610SE will do just fine. I dont need 35HP

Then your the guy i needed to talk to! I have been hesitate only because I wasnt sure. My whole reason for upgrading is more for getting a heavier machine and usable M range, most of my work is loader and snowblowing, i live on hill side down to the water and i want to keep it open in the...

Interested to see if more people have done this. I really want a 2610SE cab, but I drive up some steep hills and am worried about power in medium gear.

I have a GC as well perfectly happy just need something a little larger. On the fence with 1526 or B2601/LX2610

Thanks I certainly learned a lot there. So there is no real way of knowing the power of the transmission so to speak? for example the Kioti weighs like 3000 lbs, the Kubota 2000, with similar power from the transmission the Kubota would be more ideal for me? does the Hydrostat on a 30hp tractor...

Good Day All, looking for some advice for my property. my current tractor is my first, I only have around 200 hours on it so I am still very green. Today I currently own a Massey GC1710 TLB. FANTASTIC tractor, no issues in the 6 years I have had it. I moved a few years ago to a bigger spot, its...

You got the normal CX or the CX2510CH referenced above? Thanks for sharing

I cant find a good way to check the fluid with the backhoe on any tips or tricks?

Hey there, I had one f my grease fittings come out on my backhoe so i wanted to buy a new one to thread back in so i got 1/4-28 straight but they dont seem to thread in. Does someone know exactly what I need to replace fititngs on the GC series tractor?

Hey guys, i got this blower for my tractor, and im trying to figure out what "bolts" I need to keep in stock I know I need this bolt as ive broken some already, any others? 71 Bolt &Nut M6x40 cl 10.9 https://mkmartin.ca/files/manuals/46%20Meteor%20Operator.pdf

Hey all, I have a newer (2015) gc 1710TLB. This winter my fuel gauge I noticed was sticking at full all the time, so i assumed by sprint it would fix itself, but it hasnt. any thoughts? its a minor inconvenience but one all the same i would hate to run her out of fuel if i forget to check.

Hey all, this thing is hard to steer in the snow, seems like there needs to be some weight in the front, 4wheel is useless it seems in alot of snow where i think weight would help. I have snow blower on back and bucket in the front

Hey there, so it gets cold here -20 to -30C in the winter. I noticed my loader hydralics or even hydrostat seems very weak even after i let the tractor warm up for 10 minutes. If i scoop snow in the loader i wouldnt be exaggerating to say its like 30 seconds for it to dump the snow (raising the...

Good day, its really cold where I live, we hit -30 C, I am wondering how long I should keep the key turned for the glow plugs to work? I usually just count to 20-25 but sometimes it still starts rough tks

Good Day I had a few questions around winter. 1) I just removed my backhoe went away on and trip and came back and the legs lost their pressure it seems so it didnt stand up by itself? is that normal? 2) I got a cord run out for the block heater, it gets as cold as -30 to -35 here at its...

Good Day, I have a 1705 and im wondering the proper size snow blower to get? I know I can get 54-64 inch with 19hp at the PTO, but is there a specific size? my mind tells me i want 64 so its less cutting but my mind tells me there is more to it. thanks appreciate the thoughts

Hey all, im just wondering if people have built their own plows for the massey bucket and any experiences? I have seen some quick attach items like this Canada Forks - Universal Receiver which would be interesting but wondering what most people do. I have a 60" plow from an ATV I was thinking I...

Hey there, as I am getting ready for winter on my new 1700 series I begin to wonder how prepared I am. After last winters record snow falls I went out and baught this little gem right away and have done many projects around the yard. Very pleased over all. So I am wondering when im trying to...

Hey all, just got a new 1710 TLB, thing seems awfully mighty. has DL95 loader. I noticed the bucket has no quick attach items, do people weld hooks on for chains? and are there any front end mods people are doing to these loaders? appreciate any feedback