Search results

These guys may be a good source for your koyker needs. I bought a valve from them to convert my zl20 loader and had a very good experience. https://www.shortlineparts.com/

Excellent thank you !

Hello ! Does anyone know off hand or have a diagram showing if the supply to the loader valve comes direct from the pump and the return from valve goes to the diverter valve or do I have that backwards ? Thank you

I wanted to circle back and post my repair solution. I investigated welding it back together but there just was not enough room and no one felt like it would hold. I checked with a few shops and the price was not going to be worth repairing but the member here @wdchyd had reached out and offered...

Again thanks all for the replies and suggestion very helpful! I will take a look at that video as well. This appears to be a fully welded cylinder correct ?

Thanks very much for the replies and suggestions. Here is another photo of the other cylinder where the threads were not damaged however the rod end is also cracked

I had the rod end of a swing cylinder on my farmpro backhoe snap unfortunately. Are there any suggested methods to repairing it or am I stuck replacing ? Thank you

Over the weekend I broke my backhoe pretty good unfortunately ! The subframe cracked in the same spot on each side and the control box pulled off the frame near the swing cylinder and popped off the swing cylinder pivot. Of course I had just dug our a stump and was praising my little tractor. It...

Hello I have been doing some searching and reading on the topic. Can anyone point me in the direction of the valve they used and how they plumbed it? I was ready to buy the ranch hand kit but unfortunately they do not have a valve source at this time. On keno tractor they offer a valve upgrade...

Good morning, I have developed a pretty fast leak that Initially appeared to be coming from The steering box at the bottom of the steering shaft. However Now the steering shaft is leaking from the top as well, just below the steering wheel where the rubber boot is. I was hoping maybe it was just...

This is a shot of the backhoe valve block and where the fluid is leaking from . The loader valve is leaking from the top on the area that gets pressed down or pulled up by the control stick

Good morning ! I purchased a 2006 farmpro 2425 from a friend with the farmpro or jinma loader and backhoe. Its my first tractor and I am getting the hang of using it. On the bottom of the backhoe valves there are tiny weep holes. One of the backhoe motions and one of the outrigger stabilizer...

Hello! I am in the process of purchasing a 1.57 cleared parcel in Poughkeepsie NY, between nyc and Albany. The land is clear and pretty flat, no trees. Basically a small field. We intended to build a new house here for our growing family (just got married 12/31). I will need to bring in full...

Thanks for adding me to the board. I have been reading and lurking for awhile now and there is a ton of great information out here helping me greatly as I make a decision on my first tractor. Look forward to reading and learning more