Search results

im not creating trails, just keeping them mowed down a few times a year. They are rarely more than a foot high when i mow. There are a couple food plots 1 to 3ac in size that def get taller by the time to mow them as i usually let them go all summer until time to plant for fall deer food plot. I...

right, but still dont see a max implement weight listed that is not the lift capacity of the rear arms....but my wife says im blind

I dont see where thats listed anywhere, but my disc harrow is 1200lbs and never had any issues. Think life is rated at 3300ish for my tractor. It looks like i need to either find some bushings or a pin like my cultipacker uses. Step pin that works for cat 1 and 2

Most of mine are already about 8' wide and like to keep them there :)

Probably too big. My property is in east texas pineywoods. With a 6', i have to mow trails twice. With an 8' i think once would work. 8' prob as wide as i can run down trails without removing lots more trees. 10'maybe, but not sure. Im thinking i can get that 8', as long as the yoke width isnt...

Seems all the 8' ones ive seen are Cat 2 and since my tractor is cat 1...so not a match. Are there any good medium duty 8' 3pt shredders? Will i need to start looking at a pull behind for an 8'? I have a good heavy duty 6', but was hoping to find an 8' to save some time. I dont know that its...

I picked up this box blade and having trouble keeping the scrapers in place. When the scrapers are in place, there is about 5/8" gap behind them. The guy i bought it from had these bent pins behind it, but they really arent tight enough to take up the space, so allow the scraper to move, which...

Haa....that woulda been nice, but no such luck. Just reading the replies. Im leaning toward the mid torque honestly as it is considerably lighter and should do all i need since my air impact always has. Still not 100% sure though

Was looking at getting the M18 2962 mid torque, 650ft lb. My air impact is 750 ft lb and has always done everything i needed. Obviously, theres a part of me that says no, get the 2767 for a few dollars more that has 1400 ft lbs. It also weighs 50% more. It isnt for daily use, just fixing things...

im sure, but that means adding another set of remotes so its not in the cards for now

I just bought a HTL, so I will have that next time I use the BB. I think, from what it folks are advising, most angle blades dont have the weight to cut into the side hill and Ill be using my BB.

my box blade can tilt by adjusting the lower 3pt arms on the tractor. My thinking was that doing that, and having an angled blade would work better than just a tilted box blade. I dont know what my box blade weighs, but its a HD 6' so 5-600lbs? From what it looks like, most of the 6'...

When we had our place re-planted in pine this spring, they cut firebreaks for a controlled burn. I want to keep them as trails, but a couple are on a significant sidehill in parts. I used my box blade, with the blade tilted on one side to make them more level to drive on and keep mowed. It was...

Leaking from inside the connection. Its a pretty steady drip

One of the fittings for my front remote (for grapple) is leaking pretty decent. Checked and its screwed on tight. Only leaks when the hose for grapple is connected, so I should take that to mean theres something wrong with the fitting? Ive also seen that there are 2 types of fittings, one has a...

We did the same thing as you, more or less. Bought land right after it was logged and had about 40ac to clear for pasture. I spent a whole summer with a grapple cleaning slash. Very slow process and made me wish i had a full skid plate after the 4th or 5th time a log came up and busted a hose...

I have learned, because mine is in for about a $1000 repair, that the 2555 has a grease zert on the the power steering pump and if not greased, the bearings inside burn up. Never thought to look in an engine for places to grease. Not sure what other motors have it but it isnt in the manual

We did not treat any of our diesel last year. Neither at my place near Tyler, nor my dads near Bonham. Got down to about 0 for a couple days as you recall and no issues.

Was out doing some stump grinding and piling some brush this morning. I finished a couple stumps and turned off the PTO (woodland mills PTO stump grinder). Did some work with the grapple cleaning up some downed brush. When I went to start grinding another stump, the PTO wouldnt engage. The...

We bought some land and now i need a shredder. Tractor is 2555 Mahindra (55hp) so getting a 6'. The land is Texas Piney woods that was mostly logged last year. So I wont be mowing pastures, but keeping areas where we hunt mowed down and trails. Mostly weeds with the whatever shrubs that may try...

Tips on bending a metal canopy back? Just wack it with a mallet or is there a better way? Seems the previous owner ran inot a branch, so its got an upside down "v" shape in the middle of the front lip

Anyone carry both? I have an 18' for my tractor with loader which is about 12' long. Have a 2seat Ranger, that i dont think i could put it on trailer sideways as its almost 9' long. Just wondering if anyones tried getting both to fit on a 22 or 24' trailer while still keeping the tractor weight...

Just bought. 2555 with about 300hrs. HST. Fluid is leaking up, not down from pto shaft. Bad seal between them or something worse?

Looking for a disc harrow, but not sure what size tractor can handle for small food plots. HST, 4wd, 45hp, 4000lb tractor. Is there a rule of thumb for hp/size of harrow? Red iron clay soil

Looking at both of these tractors with HST and cabs. Specs are about the same, 45 hp/4000lb/2500lb loader lift. LS is a hair cheaper. Ive seen some complaints about bucket speed with the LS. Dealers are both close by. So far, havent seen anything on them I dont like as far as driving around...

Found a 1552 with cab, 4wd, power shuttle qps, 500 hrs for under 18K. Seems to be exactly what i want with the one exception that it has a pin on bucket. A conversion plate to change to SSQA on the front is a little under 1K, but still seems like a great deal to me even doing that...

Im hoping im an idiot and someone will set me straight. Im about to buy a MF 1552 with 1530 loader. It does not, however, have the ssqa front. The place I am buying it from said there were adaptor plates for a couple hundred. My searching seems to show more in the 1000-1700 range. Am I not...