Search results

I had one done for my tractor 2 yrs ago at a local auto parts store. Custom made while I waited on a Sat. Morn. $25. Not sure we are comparing apples to apples, but...It was for the FEL.

That makes sense to me, but did you ever try to explain that to a woman? When I bought this tractor 3 yrs ago, I went from looking(with my wife) at a 30 hp to buying the 54hp tractor with land plane and RT tiller with a loader, 4wd and HST. I liked the idea of those bits, but thought I better...

I bought my first tractor new, without a loader. When time came that I needed a loader, I bought a Woods and had it installed. It was close to $6k at that time, but it was a great loader and lifted a lot. I was very happy with doing that.

Ok, so after reading about the Everything Attachments' construction problems and knowing they have ooened their new shop, I ordered a phd from them. Will wait for the delivery.

Those rock bits are really pricey aren't they?

Yeah, but my wife is talking about buying a bunch of trees and planting them.

Wow, that is contrary to my thinking too. That's good to keep in mind.

I think like 2 of the latter posters, where mice chewing could be causing 1 or 2 wires to touch a grounded surface. Wires rubbing together or rubbing on something could wear off insulation and allow them to either short together or ground out.

Eddie, I fully considered the county line phd. I had watched a few youtube vids of people getting them. I think they are Chinese made. Having worked in a factory for over 31 yrs, I really wanted one mostly made here. About a week ago, I was close to ordering one, they had $100 off. I was also...

I had not seen that, thanks for bringing that up for me.

Yes. $350/day.

Thanks for the comments. I guess that I should just get one mostly USA made.

I do like the idea of having it in front. I know now, that I should have gotten hyd in the front and one on the back. Never thought when I bought the tractor that I would want a PHD. Talk about the price of things, I bought 2 pipe plugs to fit the oil fill and check holes on my Land Pride mower...

I do not have a front hyd on mine, so... I almost bought one like yours when I got my 2nd tractor. I had a Ford/N.H. 25hp tractor for 31 yrs.

I found that Everything Attachments makes their frames here themselves. I have no idea where the gearbox is from. I wonder if anyone has any exoerience with this brand?

Hmmm, had not considered that parts may be made different places. Thanks for the heads up.

So I have some hole to dig soon. I called and found out that nobody locally rents a pto driven one for a tractor. I found a used one at my dealers, but it is rated for lower hp units. If I buy new, would like 1 made in the USA. What would you get for an mx5400 kubota?

You might want to consider FEL lifting capacity. If you plan to use the FEL much, you do not want to fall short in that area. When I bought my 2nd tractor, that was one of the top 5 things that made me choose what I bought.

You neglected to mention the color. Shouldn't that be a deal clencher?? Ok, no, save $10k, get the 24.

I have a 17 hp Kaw and was shocked after I bought it about how much fuel it gulps.

I seldom cleaned the deck out, other than just when I removed the blades for sharpening. Deck was just fine. I just recently sold my diesel mower for $4,000. I had a bad boy with a 28hp Cat diesel in it. It is a great motor with lots of power. I needed a front mount mower deck and had zero room...

Isn't that kubota model made in Georgia?

A few good comments here. First, I have two Hickory trees and I have used chips from it on my grill, the smoke from them works great. 2nd, the idea about taking it down in sections is great. The idea of roping off part and pulling away from woods, I like. Dropping the branches away from the...

Two points. 1. When I bought, I was concerned about getting pollution control on my tractor. Zero problem. I bought the tractor I needed and the pollution control is not a big deal. 2. Though a tractor company lists how much the loader Will lift, the tractor has to be made strong enough to...

Upgraded

I recently traded my bad boy diesel ztr in for a grasshopper diesel. Huge engine difference, but more comfort with the new one with uograded seat. The front deck makes it ride smoother too.

My son has a couple Ego products and likes them.

I need to take typing again, get smaller fingers or larger keys.

I had problems with State Farm just 1 time abd that was whem I called the National office, NOT my local agent. When I contacted my local agent, that problem disappeared. Also, was another vehicle involved? If so and they also have Stated Farm, then things could go south. Did they take your...

Just today we moved a very heavy glider style porch chair from the front porch to the back patio, using the FEL. 2 days ago I used the tractor to unload the 60 gal gas tank from the back of my truck. A couple days before that, I mowed about 2 acres with the tractor. Would not think about how...

About 10 yrs ago, I had a septic tank serviced and I was mowing when the guy came. I had a 28hp cat diesel in a bad boy zt. He asked how much that ZT weighed and I said about 1100lbs. He said DO NOT drive over any septic tank with any zero turn mower unless I wanted a "brown dirt bath". That was...

I had a 1520 ford with a 72" land pride finish mower that I mowed with for years. I know about the 5hp/ft thing, but that combo did just fine. I liked the comment about tbe flail mower. Is it grass you are mowing or just field growth?

I'm with you on the air ride seat.

I have had an mx5400 now for 3 yrs. I THOUGHT when I first got it home, that I bpught too big. I had a 25 hp Tractor for 31 yrs before. Once I started working, I was glad I got that size. For the slight price difference, I would get the 6000. I do wish I had gotten a cab, my hearing has...

Well, first off I cut a black walnut tree down, had it sawed and kiln dried. The lumber was worth around $1500, many years ago. I had a mature pine in my yard that a drunk ran into at 3am. I watched as the driver got out and walked away and the woman passenger crawl behind the wheel. The HP...

I had bought the first tiller new after owning my former tractor for a while.

I had an older tiller that I used about 5 times. It leaked after a few times I used it. I replaced the gasket, cleaning after removing the first one. It leaked the second time I used it again. I saw a factory rep and at that time, he told me to keep tightening the bolts. That did it. Gave it...

I bought a kubota @0% interest new. I got one size bigger than I thought I needed. I got an MX and I a happy I did. Wished I had gotten a rear remote. A cab would have been nice, but I have a woods as well. Love this tractor and its reliability. This is my second tractor, but the best.

Mexico slowed the border crossings considerably the last time we threatened tariffs. They have so much of our manufacturing now, that they are no longer the poor old mexico of yesteryear. Drug trafficking is huge from mexico and china and it needs to stop, our citizens are worth that. The old...

Most here need to research the purpose as well as the reason for tariffs. As far as the tariffs on steel a while back, the Chinese(ccp) were dumping steel here, charging less than their cost to manufacture and ship. They were on a mission to bankrupt all of our steel manufacturers. It just about...

Been there and done that twice. Had to pull my Bad Boy diesel zt out.

I have a Polaris 800 sxs a four seater and a polaris 800 atv as well as a Ford F250. Like I read earlier, two totally different vehicles.

I have a land pride grading scraper that I like just fine. I would NOT buying anything made By BAD BOY ever again. I purchased a Bad Boy zero turn with the Cat(Perkins) 28Hp diesel engine in it a few years back. On the way home, I stopped at a gas station and filled both tanks on the mower...

I have turf tires on my Kubota and it still rides bumpy. As stated by another here, removing the Front bucket does help some, but I have tried to lower the air pressure in the tires and it did not help much if any.

I bought a new MX 5400 Kubota 13 months ago. I had a 1991 Ford tractor that I really liked before that, so it was not my first. The Kubota I got was not that much more than the 3901, but had a lot more HP and lifting for the FEL. I really love it so far. I have hydro drive and 4wd. I like how...

Since you guys are all talking about his new(to him) mower deck, I have a question. Do newer mower decks spin the blades faster than the older ones? Yeah, I know the RPM of the tractor spins the PTO at that speed, but the newer ones might have gearing inside that turns the blades even faster...

So, After owning this MX5400 since this past summer/fall and getting to 50hrs, I have come to the conclusion that I really like this tractor. I mostly have moved dirt and spread it around. I have moved snow with it as well and we had some good snow storms this year to test it. Even with the...

I was quoted $1000 this fall by my dealer. I was at the time buying the tractor new, so maybe that helped with the price, not sure.

Yeah, think you did get a good buy. I did not get the 20% discount, but did get the 0% interest for the max, 7 yrs. I bought my MX5400 last fall. I have mine at the dealer for the first service(50Hr.). Been using mine a lot. So far so good.

My MX5400 is just about at 50 hours also. I think I am taking mine in for the first service instead of doing it myself. I will do the next service myself. They want $150 to pick the tractor up, but the salesman who sold me the tractor told me he would come pick it up for nothing. I have an 18ft...

Sounds like you do a lot of your own work. Nice tractor. That trailer that they delivered your tractor on, looks like it was barely big enough to haul it. It was surprising to see that small trailer.

So, I have a kubota MX5400. What can you tell me about the Regen process? I have around 20 hours on mine and last eve I was done doing some work back filling with the FEL and was backing into the pole barn and the lights started to flash on my dash. I had read the book about it, but had...

Do you like Bad Boy products? Have you had a Bad Boy Mower?

Well, after looking for a couple months now and reading on this forum as well as reading everything I could read on different tractors and different models, I finally got the deal done today. The tractor and implements will be delivered tomorrow morning. I started out to replace my 30 y.o. Ford...

So, I just sold my compact tractor after 30yrs of owning it. I had a Ford 1520 with a woods loader on it. After I put the loader on my tractor about 4 years ago, it just seemed under powered for some jobs. I had no problem with the loader, just how the tractor responded to non loader jobs with...

Hi, Just joined here from Ohio. I bought my first compact tractor in 1990. I just sold it and am looking for another. No farm, just some acreage and plenty of jobs and uses for one. I have been reading on here some over the last 5 years, but need all the help I can get on one.