Search results

UPDATE: The repair lasted about 6 months, removed it again, took to different rad shop, (a 1 man band) he removed top and bottom and replaced core with new for $450. I searched everywhere, unable to find a direct replacement, so replacing the core was only option.

About 12 years ago I beefed up the top edge of fel bucket with angle iron, and added 3 weld on hooks and a hitch reciever. One of the most useful things I've added to my tractor. Here is a pic of using the center hook today.

Just put a set of Vredestien V61 rib tires on the front of my Cub Cadet GT2000. Turns great, no damage to damp lawn and they look cool as ****!

Just made this concrete ballast while they were pouring the floor for my pole building. Should weight about 560lbs according to online concrete calc. I had made one about 9 years ago when the were pouring my patio, but that is over 900lbs and make the front end too light with the weigh on the...

Yesterday I noticed antifreeze leaking from the radiator of my 2615. Been using tractor quite a bit last few weeks, leak just started yesterday. Looked around online, only 1 I could find was Bill's in texas, they want $800 bucks!. At other Mahindra dealers and a cub cadet dealer cause 7620 is...

Just bought a used 2011 gt 2000 with 93 hours on it. Front axle has some slop, I don't think the previous owner ever greased the zerks on the steering or front axle. Anybody have a fix for this?

Got a new tow rig 2 weeks ago. 2016 Ram 2500 4x4, 6.7Cummins

[/ATTACH]/ATTACH]My vac seemed to be blowing a lot of debris out of the wire mesh top. So today I made up 2 screen type inserts to help reduce the amount of particles it spits out yet still let air exhaust from the enclosed trailer. I sandwiched mesh screen between 2 frames made out of azek...

The past couple of weekends, I took advantage of the unusually warm weather to paint my rusting 2003 bri-mar dump trailer and a couple of my tractor attachments.

After using for a year, it still starts on 1st or 2nd pull and runs great.

Last fall the briggs motor on my used trac vac sh*t the bed. Replaced it with a new briggs 6.5hp that I bought online from equipatron.com. I really wanted to get a Honda motor but would have had to modify the mounts and housing. The replacement briggs bolted right up.

This was from winter of 2013, going to be splitting some more wood soon.

I put these on 6 years ago, they really come in handy.

This past weekend I replaced the factory rear turf tires on my Toro Z5035 with knobby Kenda Scorpion tires. My yard is on a hill and the rear tires were always sliding or spinning. The new, more aggressive tires slip and spin a whole lot less.

Anyone know of rattle can paint from home cheapo, lowes or walmart, that is close to Mahindra Red.

Before After

Tonight I replaced my factory hazard/turn light bulbs with new 1156 l.e.d. bulbs from eBay. I also replaced the single red rear light with 2 new red l.e.d. truck-lite 35375r lights facing rear, and installed 2 new amber l.e.d truck-lite 35375y lights facing forward.

Whats better, Rubber or Urethane for a cutting edge on my plow? The metal cutting edge on the plow i got used is pretty worn, and doesnt clean the driveway surface all that good. Lookin to get something cheap off fleabay or craigslist.

Need ideas for a shed to store tractor and tools. I'm looking to build one on skids simular to the ones the Amish pre-build and drop off in your yard. Searching these forums didn't turn up many pictures of sheds.

my back yard, last 2 pics were not long after hurricane sandy.

2 Foxes up in the woods in my backyard this past winter.

Central Hydraulic Log Splitter, about 10 years old, it sat not used for the last 5 years. Only problem was both tires went flat and bead broke, took care of that with some ether and a lighter. It has the briggs engine, with fresh gas, turned on fuel switch, started after a couple pulls, runs...

Just purchased this used snow plow on craigslist. Now I need to cut the frame and weld it up to fit onto my fel pallet fork frame.

Spent all day today preping and installing Monstaliner roll-on bed liner on my truck. While I was at it I also put it on the floor of my tractor and the front of both of my trailers.

Just picked up a (used) new to me trac vac 580 from craigslist today. Have been looking for about a year for a used one for the right price that wasn't too far away or too beat up. It also has a chipper for up to 2" dia. branches and twigs, haven't seen too many used ones with the chipper...

This past spring while concrete truck at my house for patio and walkways I poured a concrete ballast for the tractor.

I'm welding ramps for the deck over trailer I just bought 2 weeks ago. Picked up 3 20' pieces of 3" c-channel, a 4'x8' sheet of raised expanded metal, and a 10' 2" round bar. The trailer already had 3 metal eyes for the round bar to mount in.

Bought a new 20' fiberglass flag pole online, they delivered friday afternoon and it was flying old glory saturday morning. I ordered a well light so it will be lit dusk to dawn but that hasn't been delivered yet. Hoping to have that in by next weekend.

This is the latest chapter in my house reno/addition. Spent the last few weekends dropping trees. Hired an excavator to try and make my steep yard into someting a little more useful. He came this past friday, he pulled 23 stumps out for me and carved up my hill of a yard. I even got a little...

The latest chapter of my house renovation/addition was putting in my new underground electric service. The old service was fed overhead from across the street. My utility co. put a pole in at the corner of my property, I had to trench from pole to house and lay conduit and pull in 2/0 copper...

Would like to get hydraulic top link cylinder for my mahindra 2615. I have constant hydraulics hoses with coming to the rear that I installed for my 3 point backhoe. I'm thinking i could mount a lever on the fender that i could quick connect the supply and return lines and the top link lines...

Went to start yesterday, about 27 degrees cranked, but barely. Bought a brand new battery, replaced positive terminal, cranked and started right up. I turned it off a few second later to secure air intake, hood and fenders. went to start again but it just cranked and cranked till new battery...

Putting a 1400 sq ft addition on our existing 1900 sq ft house. Here are some pics of the tractor helping out. Clearing some trees. Just dropped them and dragged them up into a big pile in the woods to be chipped up later.

Spent 2 days cutting drilling and welding up pin-on QA and a pallet fork frame for the forks I bought. It will be nice to be able to swap the bucket and forks with out too much hassle.

Picked up 37" forks and rail body from a local fork lift repair shop a while ago, finally got around to adapting it to my 3PH and added a hitch reciever.

Previous owner had 1 hook on the center of the fel bucket. So I can move my trailer around with the BH on the tractor, I'm putting a hitch reciever center of the bucket. Spent this evening cutting off the old hook and preping a few angles for the new hooks, hitch and some level indicators like...

Need Hydraulic help, big time. Just got a woods bh6000, don't have a pto pump/tank, so I need to tap into tractor hyd. Tractor already has a FEL from factory with 3 hoses coming from hyd. block- 1 into P, 1 into PB and 1 into T. I installed two tee's, one into the P port and one into the T port...

Has anybody put a Woods BH6000 on a Mahindra 2615? I'm picking one up 2nd hand that has never seen dirt. It comes with a 3 pt mount. Wondering if sub frame is necessary or if I could get by with a 3 pt hitch mount?

Is a 6' boxblade too big for my mahindra 2615 4WD?

Would a Kelley B10A 3pt backhoe attachment( or any other brand) work on 2615 with the mahindra sub frame? Does the bh actually mount to the sub frame or the 3pt hitch? Would like to get a mahindra 3710 but can't afford the $. Looking to get a used bh that is closer to what I can afford.

Has anybody added the Quick Attach Adapter Pin On to their FEL. Are they welded on or held on by pins. I'd like to add them to my FEL so I can swap back and forth between the bucket and pallet forks. Also any close-up pics would be great Thanks Tom

Just bought a used Mahindra 2615 with the mitsubishi diesel. The owners manual says to use 10w 30 oil. What weight and brand oil do you use. Can I use the same Rotella 15w40 that I use in my duramax. Thanks, Tom