Search results

Hi Have a need to transport my 3520 (tires are not filled) with the following: 300cx loader w/ 4in1 bucket 485 backhoe w/ thumb I have a flatbed trailer with tandem 3500lb axles (brakes both axles) -- will my equipment be too heavy for it? I don't have specs for my trailer, but i'm guessing...

Happened to stumble on these hydraulic tools by Stanley: Handheld Hydraulic Tools Does anyone have any experience with these? Noticed that most of them run on 7-9gpm -- would work well with a 3x20 machine?

Ran across brackets: Front 3-point hitch/mid-mount brackets (3120-3720) Anyone know anything about these? Without these, do you need to remove the quick hitch to use the mower deck?

Hello everyone, Wondering if anyone has added a hydraulic chute deflector to their 59" front snowblower? I have a manual cable chute deflector control for my 54" snowblower on my 2320, and it works great for me. My gravel drive requires quite a bit of finesse when snowblowing to avoid the...

If you order a 3x20 with electro-hydraulic 3rd SCV, you get the cool joystick with the up/down button to control the 3rd SCV: it appears that you need to first activate the 3rd SCV using a switch mounted on the right console: My question is, if you then add the diverter valve, is the...

Hello, Upgrading from a 2320 to a 3520 with the following attachments: 485 Backhoe + thumb 300cx loader + 4in1 bucket 72d deck 59" front snowblower B2060 box blade Got tired of waiting for the 270 backhoe, and have a bunch of projects (stone work) for which I need the increased capacity of...

This is the easiest way I have found to grease the dreaded 2320 driveshaft that connects the engine to the transmission. After removing 8 or 10 screws and loosening the throttle bolt, I am able to seperate the top and botton dash components enough that I can move the lower panel out of the...

My lawn is always full of leaves, corn husks and cobs from a nearby field, dried grass clippings & thatch, etc. What is the best attachment for cleaning up? Cheapie tow-behind sweeper: Swisher Products : Lawn Sweeper 3-Bag Power Flow Material Collection System: John Deere products for...

Hello all. After much reading and research, and with the kind assistance of this forum, I purchased a 2320 in 2007. I have a 62d MMM, 200CX loader, Ballast Box, 54" front blade and a spreader (used mainly for spreading sand/salt in the winter on my hilly drive) I've been mostly happy with...

Has anyone done this? I found this option on the deere site: Third selective control valve kit it says 'kit does not include a valve' -- i'm confused. What does this kit actually do?

Can't find it. My search did not turn up any links John Deere Ag - New Equipment: Technical Publications - Publications Search

In another thread in the buying section, it was said: This explains the numbering of the 260 backhoe (6 foot digging depth) for the 2305. I can't imagine it would be long before the 46 (6.5 foot digging depth) backhoe gets replaced by a 265 backhoe, with a curved boom similar to the 260, 375...

Hi Guys. I have a set of pallet forks for my 200cx loader. I was thinking about buying/building a caryall for the 3pt hitch, but then it occurred to me: Why not build an adapter that would allow me to attach the forks to my imatch hitch. Then I can use the forks on the front or the back...

I have the 54" quick hitch blade for my 2320. If I wanted to purchase the 47" snowblower, will it go on the same quick hitch? My quick-hitch has hydraulic angle, which I guess would need to be replaced with a non-angling part, and the hydraulic for the snowblower chute angle used instead? If...

So I ordered both of these heaters (coolant heater and block heater) with my tractor (2320) but I only see one plug. Did I get ripped off? What is the difference between these two? Also, how do I know if I have the high-capacity alternator I ordered? thanks.

I was at the dealer and playing with a 200cx loader on a 2320. I noticed while raising the loader (stick all the way back) that if I tried to curl the bucket at the same time (stick to the back and right) the loader would stop raising. It would not raise and curl at the same time. Is this...

Does anyone know if a post hole digger can be used on a 2305 that will allow 48" long auger bits?

Do I need it? It's unlikely that I will want to run the MMM and BH at the same time. However, I'd like to be able to switch between the FEL/BH and MMM without having to install the arms on the 3PH. Does anyone know if the arms on the 3PH are required for the mechanical lift?