Search results

Hello I have a code for my acs. 32-75 but my manual doesn’t go that high on codes. Can someone help me figure it out. I brought machine used. So I know nothing about it. I know it has the Deutz motor. We just changed out the timing belt and injectors. Previous owner said it was a 2004 machine...

Has there been any other updates on this issue? I’m dealing with a 2023 2606 H with fuel issues. I’ve replaced the primer housing still have same problem. I’ve went as far as taking quick connector off tank and ran new lines. Put a clear fuel line on filter to injection pump. Line has a lot of...

Just checked with my dealer. Mf tracks everything done to the computer. If I have a problem and they remote connect to it and see a tune you lose all warranties.

How many have re tuned their 07’s? Wondering if it works well. I’m in hay work and sometimes need a little extra pto hp.

Hello everyone I purchased a 4707 Cab in December. Love it. But it jerks with using the clutch pedal and the declutch button on the shifter. I’ve done the calibration on the pedal it’s a little bit better. Does anyone else have this problem?

Every line on my Ihi 35j I’ve had to heat up the fittings. I use a propane torch. Have to be careful with the rubber parts of line. None of mine are reversed threads. Put a piece of scrap metal where you done want flames to get. Heat up and then spray penetrating oil on it takes two wrenches to...

From the pictures I see of you machine there has to be a access cover under your seat

Not that cover that’s usually to get to swing motor. Yes alternator will be on side with fan. Starter is to the left

My 3Ld1 starter is prone to clicking. The copper washer contact points wear out and pit loosing contact. I’ve brought a kit and rebuilt mine. From the underneath of your machine take cover off to access the motor. Your starter will be on the side closest to your seat. Two 17mm bolts hold it on...

My relay is under my control panel. But my machine is Ihi35j. Service manual can help a lot. What motor do you have?

Thank you very much. I love this excavator. Was helping my kids on their property recently and ripped the right track because of age and dry rot. Price of new tracks flipped my brain but got to have them. Went ahead a replaced in a pair. Changing in the field and mud is very fun. I painted it...

When they assembled it a oring rolled and pinched. The company fixed it no charge. Just had a week of downtime over the Fourth of July

Plus 1 on that.

Have you checked the pressures at manifold. I verify that system is full. Air is out of system. Then check pressures.

Update. Been digging ditches and noticed the cylinder I just had repacked is leaking out front. Small leak but a leak. The bucket cylinder. Downtime to take off and take back and get repaired.

I pulled the glow plugs. You’ll need a diesel compression gauge kit. Which will have the correct threads. I brought one for Harbor freight for cheap. Three cylinders don’t have sleeves but four cylinders do. Ihi is a good machine new name is Kato

Check the compression first. It should have 440 psi. I just rebuilt one.

Thank you very much.

Can’t insert video

Hey guys been using my mini and getting use to the controls. I dug out the bank behind my driveway today and spread it on my driveway with my Mahindra 5555. Had to dig ditches down both sides. I’ve got 60 tons of asphalt millings coming in soon 20 tons at a time. I got some pictures for everyone...

Well I fixed the starter myself got it back on. I’ve been using it to cut ditches in the sides of my driveway. Pretty tough little machine. Got my gauge set in yesterday and reading the manual to where to check pressure and how to adjust. Just a little nervous about doing that part.

Welcome to the forum. Their a seller on EBay that can get most anything you need. I forget his user id. Hope you find what you need

Yes I’ll have to save up for that. I want Hydraulic one.

Starter won’t work. Just clicking. I read that these are a problem with the lugs wearing out. Pulled the starter off. Going to order rebuild kit for it. Do it myself.

He’s watching from Heaven!!

No thumb. Want one. It has mounting for one and auxiliary hydraulics.

Ok everyone, I got the Bucket cylinder and two new hoses back this morning. I I stalled it and changed the hydraulic filter at same time. I had previously drained tank and pulled strainer filter and checked that. Filled system and worked system slowly to get air out and warm fluid up and shut...

Thank you very much. I’ve been sanding and painting it up a little here and there. I ordered the pressure gauge kit from Amazon today. Should be here the 18th. Still waiting for the cylinder and hoses for bucket to be done.

I’ve had the arm cylinder repacked because after start up of rebuilt engine it was leaking out front seal while running. The bucket cylinder did same thing after three hours of trying to dig a ditch. So it’s in shop now and replacing hoses that go to it.

Ok thank you. I’ll have to order some gauges.

Hello everyone, im new to the site and this is my first post. I picked up a older IHI 35J excavator. I’m slowly bringing it back to life. Was told the fuel pump wasn’t working. Back story: it was in a pasture for many years. Asked owner would it be for sale. He replied no I’m going to fix it. I...