Search results

don't forget to either put anti freeze down the drain to keep traps from freezing or blow them out, too.

I also have a creek that's about 20' clear span in my back yard. I used 4 utility poles in pairs and spread the out under the tires. has worked great driven my CK4010 with loader and brush hog on it across many times no issue. Not sure if only 2 poles would work but the 4 I used are very sturdy...

check the battery and it's connections. I've had similar weird electric things happen and was caused by a battery going bad.

I had a tacoma v6 with towing package and needed to move 4000 tractor 2 miles around the corner. I used a 7k trailer, I only did it once as the truck and trailer was not the right equipment. upgraded to a 2500 and 14k gooseneck trailer now is the perfect setup for my longer moves.

I have a kioti ck4010 with 8' front blade and keep a 7' box blade on rear for ballest and move snow. 8' width is nice but a little heavier than I would like at times.

Looks great we got chickens last year for our sons 4H project and we all still really enjoy them. We got an automatic door to open/close dawn/dusk. I would highly recomend one to make taking care of them a little easier. I also love gadgets and put a security camera in the coop and one in the...

I use a 8 gallon spot sprayer usually put it in back of utv or back rack of quad depending on what I'm spraying.

Finally got around to trying the fix this weekend. Took the cup of the bottom of the float valve. Cleaned and lubed everything back up and works great.

I'm having the same problem, haven't been brave enought to take it apart. Did you happen to take any pictures when you took it apart? How hard were the ball bearings to put back in?

The bullet connectors are on the same fuse as the dash lights. I thought they were supposed to be plugged together until the dash lights didnt work. It took a couple of fuses to remember I plugged them together. I did the same thing your thinking of and used them for a LED light bar on my ROPs.

I have a ck4010 put it on a tandem 16' trailer with a brush hog and hung off back. Also like the other guy said the weight was to far back and was hard to pull with the loader and bucket. Upgraded to a 25' goose neck and couldn't be happier plenty of room for tractor and attatchments. I would...

I have a ck4010 with a 72" bobcat hydraulic angle blade, it's heavier than I would like but came at a good price. I keep the box blade on rear for counter weight and help move snow. Does a good job.

I have seen a tail light and turn signal kit on ebay that plugs into the factory harness. I don't think there are any wires unless you had that kit installed previously.

I saw a kb2375 used with a sub frame, does anyone know if that would fit a ck40? It was on a dk35 I found some posts people put it on a ck35 so I think it might fit. Anyone know for sure?

Depends what your wanting to drive across it. I made a bridge out of 4 utility poles. Spans 25' across a small creek. I drive a 40 hp tractor with attatchments it's around 5,000 lb and don't have any issues.

I had a DR 4" chipper that has 18 hp motor liked it but wanted to do bigger stuff. So upgraded to a woodmaxx 8M. Works great enjoy the self feeding and larger capacity. Definatley would go with PTO option again if I had it all to do over.

I bought a 3 pt splitter that runs off the hydraulics from the tractor. I use it for 2 to 3 trees a year. I decided to go with tractor option so I don't have to maintain another engine and only adding a few extra hours a year on my tractor is not a big deal. It does have a little longer cycle...

I just found a 2011 Mechron 2200 but the secondary pulley is broken. I found a thread that said Kioti used Comit CVT's does anyone know of the part number or a cross reference part number.