Search results

Results 1 to 23 of 23
  1. Grand_Pooba

    Brake pedal return spring

    My brake pedal is not returning to it's proper position on my CT230. I have to reach down and pull up on the pedal to release the brakes each time. The service manual mentions a "brake pedal return spring" but doesn't show it in any of the diagrams. Anybody know where it's located? Thanks.
  2. Grand_Pooba

    Repair Common Kioti Mechanical Injection Pump Failure

    Thanks for all the great information. I just did this repair on my CT230 and followed the instructions from 2881neches. The area I did differently was that I never completely removed the control rack. I always left at least on control sleeve engaged with the rack so that I didn't loose the...
  3. Grand_Pooba

    Ballast box design

    Sounds good, but just a suggestion. If you are going to permenatly fill it with concrete why not just skip the steel and build a wooden form and just cast the cube. If I where to remake this one I would use a drawbar with a 2" receiver and the tubes for tools as you suggested.
  4. Grand_Pooba

    Leveling a spot for a new pool

    I don't know how I got along with out this tractor. I let my 15 year daughter do a lot of the work and she loved it.
  5. Grand_Pooba

    Transfering cement

    Has anyone ever used their FEL to transfer cement from the truck to form. I've done this lots of times with a wheel barrow but the tractor would be way easier on my back.
  6. Grand_Pooba

    Removing my FEL

    Hi all, I've had my CT230 for almost 3 years now and have never taken the FEL off. I just purchased a 72" KK rear finish mower and plan to use it to mow most of my 4 acre yard this summer. I'm trying to decide if I should take the loader off each time I mow, I don't have alot of things to mow...
  7. Grand_Pooba

    What grade of gas?

    Does anybody run super unleaded in there lawn tractor? I have a JD X324 lawn tractor with about 150 hrs on it and it just quick running. It's on its way to the dealer today to get looked at but I'm almost possitive it's a fuel issue. Is the higher grade gas better for these engines or would I...
  8. Grand_Pooba

    Dual Axle trailers

    Typically do dual axle trailers have brakes on both axles? I'm replacing the axles on a 16' landscape trailer. The existing axles didn't have brakes. I plan on getting 2 3500lb axles but not sure if they both need brakes. Thanks
  9. Grand_Pooba

    Boat winch wiring

    My father has a electric winch on his boat trailer and I'd like to wire my truck so that I can run the winch. He ran 8 gauge wire from his truck battery to the back of the bed with an inline 30amp fuse, from there he plugs in a pigtail from the winch. I could do the same on my truck but would...
  10. Grand_Pooba

    Mastering the FEL controls

    When you watch a professional operator run a loader or backhoe they do mostly "multi axis movements" like rolling back the bucket and lifting at the same time. I've been trying to do this with my CT230 without much success. Seems real hard to find that sweet spot in the corners of the joystick...
  11. Grand_Pooba

    My Tractor came to a sudden stop....

    My son was using the tractor yesterday and it just stalled. Now it won't start. He was just driving it down the driveway and bam. Tractor clicks but won't turn over. I checked the pto switch, all the fuses, tank is full. Maybe a bad seat switch? Any ideas?:confused: Thanks Steve CT230 (42 hrs)
  12. Grand_Pooba

    First Tractor Repair

    I have to make my first tractor all be it a minor one. I bent the bucket level indicator. I hooked it on tree limb while moving some rocks. Since I had my camera out I took some pictures of my tractor mods so far. I added two bucket hooks which makes moving big rocks that won't fit in the...
  13. Grand_Pooba

    Removing bucket from CT230

    Has anyone detached there pin on bucket? I would like to take my bucket to a welder that I know to have a couple bucket hooks welded on. It appears to have a retaining bolt at each pin on the inside of the loader arms....so take out the bolt and tap the pin out from the inside. Am I assuming...
  14. Grand_Pooba

    Fast dump?

    I have noticed the that it takes a long time to "dump" the bucket on my CT230. When its cold its about 10 seconds and after it warms up its about 6 seconds. Is this typical with all the other 230 owners? The manual doesn't give cycle times for the loader. All the other tractors that I've used...
  15. Grand_Pooba

    2 bottom plow conversion

    I've been looking for a good deal on a 2 bottom plow to pull behind my CT230. Well I might have found one....in my back yard. This plow was half buried in the ground and covered with brush on the back property line. I considered rebuilding and using it as it was designed I would have needed a...
  16. Grand_Pooba

    New Lawn Mower X324(all wheel steer) or Z445 (ztr)

    My wife and I have decided we need to upgrade our lawn mower. We are currently using a 4 year old JD L120 that has not held up well. We mow 2 acres at our house and a 2 acre cemetery down the road. We need a mower that's around stuff well (head stones) that's why We're looking at the all...
  17. Grand_Pooba

    L120 Engine problems

    Hi all. I have L120 with about 300 hrs on it and it's been running very poorly. The engine misses and pops constantly at full throdle. I saw that one of the plug wires was arching to the block so I relaced it with a new wire/coil which gave me alittle improvement. Since the grass is growing...
  18. Grand_Pooba

    Harvesting my first garden

    I planted my first ever garden this year with the help of my wife and kids. I had done no research or planning and to be honest I wasn't expecting much.:rolleyes: Well so far my 1/3 acre of mostly weeds has produced two bushels of beans, 4 heads of broccli, more carrots and corn then I know...
  19. Grand_Pooba

    Growing sweet corn

    I'm planning on putting in a garden this spring for the first time at my new house. My kids all like corn on the cob so I figured I put in a few rows. The farmer who ownes to property behind mine plants all field corn. It'll be about 20' from my sweet corn, am I going to get cross germination...
  20. Grand_Pooba

    Suspension seat

    Hi all. I'm looking for a suspension seat for my father's 2015. He loves the tractor but it does a real number on him driving it at our property. Ideally he'd like to keep the seat and just bolt something under it. Thanks
  21. Grand_Pooba

    Tilt meter mounting

    I'm look for a good xmas present for my father (the guy who has 2 of everything) and I thought a tilt meter for his 2015HST would perfect. The only problem is that he's not a big fan drilling holes in a brand new tractor :eek: . Can anyone tell me where and how they have mounted one of these...
  22. Grand_Pooba

    15 series New design or Old design?

    I just "discovered" mihindra tractors a couple weeks ago in my reseach for a new tractor so excuse me if I'm a little uninformed. Why do the 1815 and 2415 look different then the rest of the 15's. Different hood, fenders and lighter specs. Are they lighter duty?
  23. Grand_Pooba

    Backhoe  ck20 backhoe performance?

    I'm planning on getting a new tractor later this summer I like what I've read about the Ck20 HST. I'll be using it to clear my driveway, very long country driveway, in western NY. I live in the "snow belt" south of buffalo and snow removal can be a daily task. I also take care of a small...
Top