Search results

What is the purpose of self-driving cars (or whatever the liberal loons wanna call them)? The steering wheel is a foot in front of the driver, people really are that lazy that they can't keep their hands on the wheel? What do they plan on doing, taking a nap while the car drives?

You could try adding some wifi antennas (not extenders) which would allow you to use something like Eufy cameras. Something like this: Amazon.com

Damn, it's incredible just how much smarter you are than everyone else!

Remember this growing up as kids? "TURN OFF THE DAMN LIGHTS!" "IT'S DAYTIME WHY THE HELL DO YOU HAVE THE LIGHTS ON?" "WHO LEFT THE BASEMENT LIGHTS ON?" "TURN YOUR DAMN BEDROOM LIGHTS OFF WHEN YOU ARENT IN THE ROOM!" now they want us to plug in and charge cars all night....

Tractor stays in the bay on the right

Probably $150,000, but don't worry you will get $8,000 in tax credits and you'll be saving the planet from the global warming (or climate change depending on the day) scam!

Garter

Sorry, shoulda said people are getting softer by the day

People getting lazier by the day

Doing my part to save the planet. Picked this up last night at the local farm store. Next up is a Fred Flintstone car.

Not sure when you plan on completing your project, but until then you should look at getting a Log Ox for picking up rounds off the ground.

how about climate change?

I blame today's earthquake on EV's....

Wonder what the "migrants" are paying for auto insurance

And all of his followers...

Everything is going up, but ask some certain folks and they will tell you the economy has never been better and you are definitely better off now than 4 years ago!

'Merica

You may already know this, but even though the deck is new make sure you use a deck cleaner after sanding and then a brightener to open the wood's pores to help the stain soak in and adhere better. The Armstrong Clark stain I used covers a lot of square footage, so with a large deck it may be...

You could buy the best stain money could get you, but if you don't properly clean the deck and let it dry prior to applying the stain you are wasting your time and money.

Take a look at this website for reviews on deck stains. At my old house I restored the deck and used the Armstrong Clark oil based stain. It was awesome. 3 years after applying there no signs of wear. Prep is everything though as I am sure you are aware. Most people think they can just...

:ROFLMAO:

Yeah I'll just be moving it around

Shout out to Good Works, sent them an email using their online question form, got a reply within 10 minutes from the President. Pretty impressive. The pins are not used when the forks are used on the front end loader, only when they are used on the 3 point hitch

Good call out. I'm going to call or email them and will ask that question. I could kill two birds with one stone with this set up as I wanted a set of forks for the front anyways

Thanks Lou! ANy thoughts on these? https://www.goodworkstractors.com/product/gwt-versaforks-pallet-forks/

Appreciate the comments so far! I'll definitely look into the 3 point pallet forks. Any recommendations?

Thank you for your reply and confirming my thoughts. My rear tires are filled, would I need more ballast?

Hello All. I operate a hobby maple farm and I'd like to make some improvements to my sap collection process. Right now I use my Kubota BX2200 and I tow a 55 gallon tank in a small dump cart. This is our first year using reverse osmosis so the sap collection and planning of boils has changed...

Any luck?

Call Paul L. at the Emerich's location in Melrose NY 518-753-6212 https://www.emerichsales.com/

Yeah we never get to that point where we are collecting "buddy sap." Plus, when it reaches that point I am usually pretty tired from the countless hours of boiling and ready to move onto other chores. That's after the dreaded clean up - scrubbing and rinsing all of the taps and buckets...

You look for a stretch of weather where overnight temps are below freezing, preferably 27-28, and daytime temps are around 40 or higher. Full sun is ideal too

Finished up the tapping yesterday

We keep a close eye on tree health. Any warning signs and they don't get tapped

It gets tricky trying to figure out when to hang buckets. I missed a nice run a couple weeks ago, but I also don't like the buckets sitting on the tress for extended cold spells. We look to have some good sap weather coming this week.

Drilled some holes in the maples today. Pretty windy today so I didn't want to go deep in the woods so we'll finish up the remaining 60 or so taps tomorrow.

Nice! I love the area I live in now. In the country but not too far from necessities.

Glad to see another sugarerrrrrrrr here! I'm going to be putting in my 100 taps on Friday!

I think you might have missed my sarcasm

We may break a record temperature on Saturday in NY that was set in 1955. This past summer we almost broke two records, one set in 1917 and the other in 1922. We better all run out and buy an EV to save the planet before it's too late....

Drove one of these for four summers while home from college on Lake St. Catherine, VT. Would cut the Eurasian Milfoil which would then ride of the conveyor on the front and dump onto a longer storage conveyor on the back. When the load was full, we'd make the very slow trek to the offload...

Sure seems to be!

Had the letters wrong, I have the PPS M2!

Played tennis my whole life including D1 college and never had tennis elbow until now, when I am older......from firewood....LOL!

I really like my Walther PPQ!

Op - what was the outcome of your search?

Sorry if freaks offended you. I should have used "lunatics" instead.

Appreciate the tip! I am going to give it a try

Thanks for the heads up!

yup, I enjoy it though and it's a great workout. But I may just have to use the splitter going forward

Thanks! I'll ice it and that helps for a bit, then something aggravates it again. Thinking I might need a cortisone shot.

Dealing with an elbow injury right now that I think is a result of doing a lot of firewood in 2023. Splitting by hand, grabbing pieces with my one hand to set back up on the chopping stump. Something as simple as picking up a cup of water by the top of the cup hurts like heck.

I've given up debating the EV freaks. Like you said, they will go to any length to prove you wrong, or at least try to prove you wrong and if they can't they just call you a Maga ***** loving idiot.

That's a sweet knife!

I have an older Kubota BX2200 with the BX2790 blower on the front and it throws snow a good 30'. I have quite a bit of snow removal to do and this combination has handled everything just fine, including a 38" snowstorm to start get winter started a few years ago in upstate NY.

30 cord a year????

https://acc-u-mark.com/

I'm a fan of the Hulkman products and have their Sigma 5 and Sigma 1 maintainers. Pretty happy with them

I got one as a Christmas gift. WOW, amazing tool! WAYYYYY better than my pickaroons!

Wow, that's great. What would you consider "better wood?"

Full cord of split wood here is going to average of $350. And while the sellers claim is seasoned, it aint. lol

unfortunately. Unless a "cord" is something different in your neck of the woods

Another marketplace score. $150 / cord. Still have about 3 loads to pick up

I inherited a plastic tub of brand new fittings when my FIL passed away. I'll check for 10 mm if you like, I'd give you a good price on them

Zero turn all the way.

Yeah I have a small Bosch 12v that works well but needed some extra oompf so picked up the Ridgid. Was on sale ($60 off) and came with a battery, charger and case.

Ridgid 18v subcompact impact driver

I'm on my third season with an EPA stove. They are pretty nice and excel in "low and slow" burns during "shoulder season." Can also run them hot as needed too during the really cold spells.

Moisture meter. Split a piece and take your reading on the fresh cut portion https://www.amazon.com/General-Tools-MMD7NP-Moisture-Tricolor/dp/B00HARYVUQ?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=ATVPDKIKX0DER&th=1

Sounds like I won't be looking at this option any more!

Anyone have one of these or something similar? Looking to get some heat in my fairly large garage that is basically a basement under a restored barn...

Old Milwaukee....isn't that a beer? :)

Amazon had some great deals on Hulkman stuff for Black Friday. I have their sigma 5 trickle charger but ordered their Sigma 1 since it was 68% off. I also have the Alpha 85 jumpstarter and that is on sale still.

Let us know how you make out

I did an online chat with their support at https://register.ridgidpower.com/ I'll also add that I had completely forgotten my username and password to the site and they looked me up by name and helped me reset my info.

That's great to hear. I recently had a great experience with Rigid. The 17 year old batteries to my drill/sawzall combo kit finally crapped out, they replaced them with zero fuss. Granted they do have a lifetime warranty policy as long as you register the parts, but I was glad to see they...

I don't know much about these, but $110 off their normal price https://www.crutchfield.com/p_452NEROMB5/OSD-Nero-MB5.html?tp=186

Get a Hulkman

Yes, these are also known as excellent bang for your buck!

Bought a 590 last night! 20" bar, couple spare chains. Can't wait to give it a test run this weekend!

So sorry for your loss, truly heartbreaking.

Take a good look at these. I've read a lot people say for the money these are excellent speakers https://www.parts-express.com/Dayton-Audio-B652-AIR-6-1-2-Bookshelf-Speaker-Pair-with-AMT-Tweeter-300-651?quantity=1

Take a look at Dayton Audio speakers. Pretty decent for the price

Budget? The Polk that 2manyrocks linked to is a nice price and would work well. I have these in my kitchen and they sound fantastic https://www.crutchfield.com/p_107OWM3B/Polk-Audio-OWM3-Black.html?tp=186 Just personal preference, but I prefer using an audio receiver and old fashioned...

Two: Have a new Kioti CK2610 that I wish I bought 6 years ago when I bought the property I live on now. Kubota BX2200 that I bought from the previous owner of the property. No bucket but has mower deck, bagger and front end snowblower. It's main use now is taking care of snow and keeping the...

Call Dave Wood at Maplewood Ice. He does hauling on the side and may be interested in your job. He's a great guy, very reliable.

Your min/max pressure is very important. Many sleep apnea doctors are fine with and AHI of 10 and higher which is ridiculous. Your AHI should be between .5 and 2. I was using a min of 4 and max of 10 thanks to my doc, but I was seeing AHIs of 10 and higher. I was ripping my mask off in the...

Agreed!

When I mark the tree with the 16" magnetic measuring stick attached to my saw blade, I always start at the biggest part of the tree. Once I get to wrist size parts of branches, I usually just eyeball it. Unfortunately I didn't cut these chunks, a tree service guy did.

Thank you. When I am blocking I make sure I cut to 16". The wood in my photos was a FB marketplace deal and the tree guy must think 16" is a lot longer, lol.

Curious - some of the rounds in these photos are anywhere from 21" - 24" long. For those who heat with firewood, would you split the difference and get 11"-12" pieces, or would you cut to the normal 16" - 17" length and have a lot of 5"+ end pieces. It all burns, so probably a moot point.

Congrats! I just got a 15% off coupon in the mail for Home Depot. I know I said I wouldn't buy a saw there, but the 15% makes it tempting.

Thank you! I'm always here, do a ton of reading and I'm always amazed at the knowledge on this site!

Windy today, a lot of these leaves will be coming down

Glad to hear she is doing better. I never realized how much the CPAP helped until I lost power one night and didn't have my generator. I was completely useless the next day

Sleep apnea is no joke. I've been on a CPAP for close to 10 years now and as much as it sucks wearing a full face mask to sleep, it's made a huge difference. I'm hoping I didn't do too much damage to my heart by waiting too long to take that sleep study

Understandable, but I think all dealers are the same way. Tough to compete with prices you find on Amazon, but that applies to just about everything not just mower or saw parts

Nice. I've spent a lot of money with my local shop and am considered a VIP customer, so I seem to get moved to the front of the line when it comes time for repairs. So far I've purchased lawn tractor, walk behind mower, Ferris zero turn, Echo backpack blower, Echo trimmer, Kioti tractor and...

I like supporting my local shop. Plus, if it ever needed warranty work it seems the local shop moves products to the end of the line that weren't purchased from them.

I almost bought a 261 about 10 years ago and kick myself for not stepping up to that model, but aren't the Stihls now almost double the price of the Echos?

Where are you seeing it for $419 with the 20 inch bar? Not that I would buy it from Home Depot but when I ask my local dealer to price match I will need a link most likely. Thanks!

If it helps your decision with the Echo trimmer, I bought the 2620 this summer and it is awesome. Also have the PB8010 backpack blower that is a beast. I've been wanting to upgrade my saw and hearing the 590 is $419 is tempting.

Awesome cups! I've never been to a Buc-ees before but I have family in Texas so I had them send up some schwag.

Bump. Sill available

Marketplace score. Sugar maple. Not done picking it all up yet either, probably three more 5X10 trailer loads to go. Sorry, put my tractor away before I took the photos.

I've read and heard a lot of great things about this Stihl blower! Did a great job on the trail. I'm always amazed at the power of my Echo 8010 blower too!

Same here. Drives me nuts to drive by nice homes with lawns that are mowed to about 1" and brown, full of weeds and grass clippings. Not sure why people feel the need to mow so low.

Good story! I disagree on the scalping part though. A 54" will scalp as easily as a 61" and if you are scalping your lawn you are mowing way too low. Mow high, mow often. Jut my opinion though

I will add that my older Scag walk-behind that was mentioned in my previous posts has a Kohler Command engine that has been free of any issues (knock on wood!)

I hear ya! If money was no object I'd have the ISX3300!

Highly recommend a Kawi as well!

The products I owned were "residential" grade but a former co-worker bought one of their "almost commercial" grade ZTRs and that too was junk. The frame on the 33" walk-behind I bought cracked, same thing happened to former co-workers ZTR. The 33" walk-behind was purchased at an independent...

Based on my experience with Cub Cadet, I would not buy another nor recommend anything Cub Cadet. Pure junk, in my experience. Have you considered a stand-on mower? From what I gather they are much more agile than a ZT, and you can stop and get off them much quicker if you need to pick...

Regarding the second question, check out the Hulkman or Noco jumpstarters. I have the Hulkman and it works great, heard a lot of positive reviews on the Noco as well. Compact and easy to use

Thanks for the photos Lou! Good stuff!

Thank you very much for the info. Can you explain the "grind down the base tractor end for width?"

Thanks Lou! I will definitely check out that set up. Any chance you can post a photo of your rig so I can get a better idea of your setup?

Since I can't seem to post a new thread for some reason, I figured I'd post in a fellow New Yorker's thread! I asked my dealer about a hydraulic top link for my 2021 CK2610, and he recommended the following: Summit Hydraulics TOP LINK Category 1 Cylinder $209.95 11” Stroke Should I look at...

Nice lookin stuff!

Sounds like they caught the POS

I have one, you'll love it. very handy and very tough. Ohio Steel has great customer service too. I needed a replacement bolt, they sent a whole bag of nuts, bolts, etc.

2025-26 food for the Blaze King. Two rows on the left are kindling and odd shaped/length pieces. Split 90% by hand with the trusty Fiskars splitting maul since it wasn't a rush to get it done.

Exactly what I was thinking when I saw the photo!

What a mess! Where abouts are you located?

I hope so too. You know it's wet when the front wheels on a zero turn start leaving marks in the grass! How was Empire Farm Days? You shoulda stopped in for a meet n greet!

Mornin! Looks to be a beautiful day in upstate NY

Ballistol

Can anyone recommend a seat cover for a CK2610 that fits fairly snug? Thank you!

Definitely saves a lot of time and hassle, but not a cheap investment by any means. You have to consider the cleaning of those lines and maintenance of the pumps, squirrels and deer and other animals chewing on the lines, damage to the lines from trees and tree limbs, etc. My next improvement...

I'm in Charlton, NY on 5.5 acres and have a maple syrup operation. 100 taps all on buckets. My stone "road" that goes around the perimiter of the property goes from snow to sheer ice to mud then back to snow then ice then mud, rinse and repeat, during suagring season. I use my little Kubota...

Split some evaporator wood this morning for the maple syrup operation

Doesn't get much better than a pontoon boat on a beautiful lake! Yes the little lake has always been a mess! Apparently they stopped using the harvesters for a while and went to chemicals on the big lake, but I thought they had brought back one harvester for the little lake. I could be wrong...

Hey Scott_vt! I grew up in Granville, worked on Lake St. Catherine in the summer on the milfoil harvesting machines. Good friend of mine lives in Wells just a little ways past the General store. Great little place to live!

Mornin from Charlton, NY. Going to be a beautiful Memorial Day weekend!

Not sure where you are reading your reviews, but I put the Continental CrossContact LX25 on the wife's Acura RDX and they are far superior to the Michelin's that came with the vehicle. The LX25 gets 4.5 stars on TireRack, the LX Sport version doesn't get as high of a rating. Maybe that's the...

Nice! Glad it was helpful and you were able to get it done. My BX starts right up every time after doing this mod.

See if this helps. You're right though, the thread that I referenced for the same issue is gone.

If your lawn is very bumpy, look at Ferris. Their suspension makes the ride so much better. Some say they don't cut as nice as Scag or Exmark but I have no issues with mine. I have an IS2100 with a 29.5 HP EFI Kawasaki motor. If you tend to mow high wet grass, I have read that John Deere's...

I got one of these for $25 from a neighbor. Works great but on the heavier side...

^^^ This ^^^

Just try the ones I posted in the link to Harbor Freight. For $2-$3 if you don't like them or they wear out too fast you're only out a couple bucks

So far these have taken a lot. No signs of wear at all. I live in the northeast and the winter version is nice too on a cold day. They are cheap too so if they wear out, toss them and buy another pair!

I've recently converted to this style and happy I did. Great grip so fatigue is reduced, and great for firewood because splinters wont penetrate the coating. https://www.harborfreight.com/safety/gloves/a5-cut-resistant-work-gloves-large-57643.html

Definitely going to do this!

Thought I'd post a follow up. Ended up getting a Heavy Hitch and couldn't be happier with my decision. You get what you pay for, and this thing is built like a tank!

I posted some pics a few weeks ago of my maple syrup operation (which requires a lot of firewood!) so I'd thought I share a few from yesterday's tapping. Put in 45 taps and will put in 45 more today. Crazy weather this winter in upstate NY so far so who knows what this season will be like...

I've had my eye on a Mak 1 Star General for a few years now but just can't bring myself to spend a couple grand on a smoker. Researched the hell out of them, 100% made in America, built like a tank and supposedly the best electronics in the business. Maybe some day I'll pull the trigger...

SOme really great suggestions here, many thanks to everyone who commented and suggested various routes. I'm always guilty of paralysis by analysis, so it might be some time before I make a decision and actually pull the trigger. I'll definitely post a follow up when I do though!

Beautiful day for splitting

Trying to find a local dealer for Dolmar/Makita, not having much luck at all. I have an Echo/Stihl dealer 5 minutes from my house who I have purchased a lot of equipment from (zt mower, compact tractor and implements, Echo PB8010 blower) and they take pretty good care of me. That's part of why...

I seriously considered a 261 when I got the Farm Boss and kick myself for not getting one.

Ooof, yeah not looking to spend $1000. I'll take a look at that 6100. Appreciate the replies so far!

One of my best buds is a logger and a big Husky fan. That's two votes for Husky

A new saw. Current saw is a Stihl MS271 Farm Boss. I like Echo for the 5 year warranty, which saw in their lineup would be a better (power, faster) saw than my Stihl? There's really nothing wrong with my Stihl, just looking for some more power but not looking for a huge saw. All I'm cutting...

Put the better half to work today

I believe the super duty has a safety chain hook

Good idea on paying a little extra for the option for weights. I do like the price of the one you recommended, I'm just trying to stay away from China as much as I can!

Has anyone purchased from Heavy Hitch? If so, are you happy with the quality? Also, is the one in the link what I need for my Kioti CK2610? Thanks for the help! https://heavyhitch.com/product/category-1-three-point-receiver-hitch-adapter-cp/

Very nice, sounds like a great operation! Probably has a pretty big evaporator and RO I would imagine, 300 taps will get you a lot of sap!

That's awesome! It's a great place to live, quiet little hamlet. 300 taps, safe to assume he does tubing?

A dutch oven makes awesome bread, just sayin!

Thank you! We typically put out about 95 taps. Trees are a combination of sugar and maple. The one photo of the tree with the buckets and the can of beer is out best sugar maple, we call it the "money tree" :)

Nice eye! Yes, we have a "sap house" that holds two 65 gallon tanks, and that gauge on the wall will give us an idea of how much is left in whatever tank we are pulling sap from when we are boiling. This is a photo of the sap house. If you notice the two tanks are tilting forward - they are...

Thanks so much! I'll be honest, everything was built and on the property when we bought it 5 years ago. Thankfully the original owners are still close by and taught us everything we needed to know. Never in a million years did I think I'd be making maple syrup, but it sure is fun!

Yeah it is definitely time consuming! Just yesterday I was thinking about a different wedge for the splitter that would make the process a little more efficient. Even a 4 way wedge would be much better. As much as I enjoy splitting by hand, it was not done by hand!! hahaha

Thank you! mostly poplar in there as well as maple branches that come down over time. The evaporator isn't picky!

HAHA Yeah it is definitely a lot of wood, and a PITA to split it to that size. Syrup is just a hobby for us, we average about 20 gallons a season but it is a lot of fun and when late February / early March rolls around I am ready to get out of the house and do something productive!

Getting started on filling up the second bay of firewood for the maple syrup evaporator. I estimate it'll be drying until the 2025 season.

I have a bunch of pipe taps and cutters that I inherited from my Father In Law after he passed. There's actually more than what is in the photo (smaller sizes). These will be heavy to ship but maybe someone is fairly close and would want to pick them up after purchasing. Send me a private...

Mornin everyone!

This site provided a lot of great info for me when I was in the process of refinishing the deck at my last house. https://www.deckstainhelp.com/the-5-best-deck-stain-reviews-and-ratings/ Based on the info on the website I went with an Armstrong-Clark stain and it was fantastic. I see that...

Great advice. My first machine fell under the Phillips recall and I had no backup. Since there are basically only two manufacturers of CPAP machines, it was almost impossible to find a new one that I could use in place of my Phillips. I actually had to do another sleep study just to be...

I find that when my mask starts to leak, it is time to change the cushions on the mask. I also love the mask liner from Pad-A-Cheek, not only helps prevent leaks but also prevents the red lines on your face and forehead every morning and is much more comfortable especially in the summer months.

I'd like to add that an AHI of 10 or less is considered good by sleep doctors and in comparison to an AHI of 60 without a CPAP it is much better, but in reality your AHI should really be 2 or less. A friend of mine who also suffers from severe sleep apnea took a look at my data when I first...

Check out Hulkman. I'm having this delivered today https://www.hulkman.com/products/sigma5 I also have this jump starter which is fantastic https://www.hulkman.com/pages/alpha85

Been using a CPAP for about 7 years now. Snored LOUDLY my entire life then would stop breathing while sleeping and would wake up gasping for air. Finally got tested and was diagnosed with severe apnea. Stopped breathing every minute and would sometimes stop breathing for well over a minute...

Yeah they are 3/4". If my buddy backs out of the deal I will certainly let you know!

Not sure where to post this. Wondering if someone can give me an idea of what to sell this bundle of tools for. The sockets and wrenches are huge, 1 7/8", 1 1/2" etc. The larger ratchet is a Proto. My Father in Law passed away and he had a TON of tools, many of which I dont have a need for...

Ballistol

When my Kioti was delivered, tank was empty. The guy who delivered it to me was also my salesman since he lives near me. He was not happy, so he drove to their dealership that is 5 miles from my house but sells Kubota and filled up two 5 gallon cans and brought them back to fill my tank. Got...

I was mowing an area of my property with my walk-behind mower a few weeks ago, paying attention to my line and not the low hanging tree branch from the huge yellow birch tree ahead. I mowed right under the branch and after about 10 more feet, I made a turnaround, looked up and saw a very big...

Did a little work today on a pile of logs. Loving the Kioti and grapple so far!

I was going to order from MTL but I could not for the life of me get anyone to answer an email or pick up the darn phone, so they lost my business. I ended up ordering a 60" single tine grapple from North American Implements, and I must say the customer service was pretty darn good. Had my...

325 lbs

Thoughts on the weight of this one for my Kioti? 325 pounds https://northamericanimplements.com/collections/grapples/products/single-tine-root-grapple

Thank you for the info. I kinda thought a 66" would be a little big, unfortunate because Tomahawk seems like a great company to deal with. I did ask if they had any plans to build a smaller grapple at some point but it doesn't like it is on their priority list.

Great info, thank you. I sent Tomahawk and email this morning and Brandon just called me about 30 minutes after I sent it. That's pretty impressive. The Tomahawk is a great price, I will have to pay shipping and but quick couplers though, but overall still less than the price of others I have...

I'm now considering one from Tomahawk.

Does anyone have any experience with the grapple in the link below? Seems to be in stock and I really don't want to wait 8 weeks for one from EA or some other manufacturers. I've been going back and forth on the style I want and I think this one will suit my needs the best (picking up logs to...

Why does it need a cab?

Thoughts on the grapple in the link below? Seems to be in stock and I really don't want to wait 8 weeks for one. I've also been going back and forth on the style I want and I think this one will suit my needs the best (picking up logs to cut into 16" firewood lengths, picking up rocks to...

Great idea! Thank you!

Thank you! In due time!

She was delivered to her new home today!

What are some other options in the same price range for grapples other than MTL? I can't get any info from MTL when they will be back in stock on most of their products

Well she finally arrived after about 7 months of waiting! Taking delivery this upcoming week. Getting a Land Pride brush mower since there is no ETA on the Kioti brush mowers. Just need to decide on a grapple now. Seems MTL is out of stock on the one I planned on getting but wanted to wait...

Still waiting on the Kioti! Hopefully will be taking delivery in April

Another satisfied customer. Did the relay a couple weeks ago and knock on wood I haven't had the starting issue since!

You guys are making me wish i got a cutter without a slip clutch! lol