Search results

Looking again, I do see that but don't know where it is. Is it internal or external?

We bought it in March of this year.

Updating my threads. I found a drawbar for a John Deere with the correct dimensions to fit the channel under the tractor.

Cleaned the strainer, new filter and oil. Now the hydraulics work fine. Thanks guys.

Yes, that makes sense. I was considering down time and shop space. I'll talk to him and see what he has to say.

The parts manual shows an o ring for the flange seal. So you just remove the flange and pull out the screen? Is there anything else to consider while the fluid is drained?

Not as serious as my hydraulic issue but it needs to be fixed. According to the Hoye site our tractor has the old style steering knuckles. Serial number 336D-40xxx We have a Ford motor mechanic in the family that will do this for use. I want to have all the needed parts on hand for him, but...

I have finally had a chance to put the new tractor to work. There are a couple issues that I will address in separate threads. First, I have a brush mower. It is very difficult to keep it at a proper height. Very slight movements of the 3 point lever puts the mower on the ground or all the...

The seller delivered our tractor today! It sure is pretty. I'm going to hate taking it out in the mud. It's wet today, but when it dries I'll take a picture and post it.

Wow, I didn't anticipate so many replies so quickly. Mine has a rectangular slot and a hole for a pin. When it is delivered which may be tomorrow now, I'll get under it and take some measurements. If I use bar stock the only issue would be the size of the hole to drill. Yes, there is a...

Hi, first post here. We just bought a new to us 336D today which will be delivered next week. It doesn't have a draw bar. The seller said he would look to see if he has one but I don't have much faith in that. Can a new one be purchased or would it need to be fabricated? I don't want a 3...