Search results

Can you find parts for Jinma tractors?? Are they too big of a risk? Thanks

EdGooding is correct. I should have paid better attention when browsing through the manual. I am sorry for wasting any of your time with such a stupid mistake by me. I thank all of you for taking the time and effort to help me.

That link goes to a manual with the same problem. 46 pages......about half of the manual.

Do any of you members know of a source for a complete NAA service manual? I have bought two manuals and both are about the same. They are about 44 pages and per their index they should be a little over 100 pages. I have looked for info in the manuals and the index says it's on page so and so...

The pump is driven by shaft coupled to the pully. So your comment made me think, "He's right, the pump is not turned by the belt". Thanks for your help.

My old Ford NAA has a Wagner loader installed. This causes the minor job of replacing the fan belt a very difficult task. Amazon.com Have any of you tried these types of belts on a tractor or other engine? I am hoping this could be an alterative to taking apart the many parts needed just to...

Ya, I hope your right although I also have to turn the Hydraulic pump for the loader. It's mounted forward of the engine.

My NAA has a Wagner loader installed. This makes changing the fan belt a difficult job. Have any of you members tried these belts...

Yes I found it. Thank you.

Thank you all very much. Syn it's going to be. Fits in well with the rest of my equipment.

Seems harder to find conventional oil now days. Is syn okay to use?

The manual I downloaded for my NAA says to check the fluid levels on the trans and hyds with the dip stick. Even says the hyd case has a dip stick on the right side of the case. There are no sticks that I can find. There are large filler holes so I can look into the cases to see the fluid...

thank you all..........

Have any of you learned a good way to paint the raised lettering on tractor body work? I have been trying to find a way to do this on my Ford Jubilee. I tried using a sponge with paint on it by lightly pressing onto the letters but that did not work. I see decals advertised. I will research if...

thanks

Ya, oil bath. Thanks I was hoping that was the case.

How touchy is the type of oil needed in the air cleaner? Can I use ATF, power steering oil, gear oil or the multi-grade I'm using in the engine? I was hoping not to need to buy some special oil just for the small amount needed for the cleaner at todays prices. Thanks.

Problem solved for me. Just as you members told me the pressure outlet is behind the hyd pump (gear driven) I loosened the pump from the block and although the pump is connected with hard lines I was able to easily move the pump away from the block. I did not have to put any real stress on the...

Thanks for the input

Looking at spark plugs for my Jubilee the vender ask that you choose "medium" or "hot". What is best for using the tractor for work? What are the pro's and con's for each? Thanks.

Thank all of you for the input. I should have mentioned there is a loader.

I checked tire pressures on my, new to me, Jubilee. I found the front tires have over 60 lbs pressure in them. The tires are labeled as 6.50-16 6 ply. The manual I have does not show that size tire in the recommended pressures chart. The closest the chart comes to my tires is 6.00-16 6ply. The...

Thank you ed for the link, I will use it. Thank you john, that is very good news and the pic's are really helpful.

From what I've been able to find out it seems my Jubille came stock with a "vane" type hydraulic pump. Some time during the tractors life someone changed the pump to the gear type. The gear type does not "neck" down on the forward portion of the pump which apparently causes no room between the...

Thank you

I just bought a jubilee and there is no oil pressure gauge installed. There is a hole in the dash for the gauge but it's empty. I see there are gauges available but where does the line attach to the engine block? Thanks if you can help.

Did you ever solve this problem? Thanks