Search results

What did you end up using for seals? I have one with a rebuilt motor I can’t get to stop smoking

Do you know if it has the yanmar or the Cummins engine?

Ok. I noticed you said in an earlier comment you barely use it and was curious if you're interested in selling it? I have a 3040 but it has a cracked head.

You still have that tractor?

Huckster who welded your head for you? I have the same head with cracks and need to get it fixed.

Thank you. I was having a no start issue and wanted to make sure that didn’t have anything to do with it. I think I have it narrowed down to the neutral safety switch

Can anyone tell me what the tractor in the upper left hand corner means?

I am looking for a Mahindra 2615 wire diagram. I have a service manual but can not zoom in on the wire diagram without distorting it.

So it was bearing #10 and #12, both on the same shaft. One those where replaced noise went away. The hydraulics are operating slow once I completed reassemble, but got the noise to go away. If anyway ask it’s a nightmare to get that bearing out. Tractor was split twice and all the plastic had...

did you ever figure out the problem?

So how big of a job is it to get to #12 to see if that's the issue? Also is there a way to attach a video to this thread ?

Some of us learn things the heard way I guess. I just have to try and figure out what bearing it is

The noise was the reason for the split. Yes I only replaced the bearing because my supplier sent me the single stage pressure plate and its a dual stage. The clutch disc was right but the old one micrometer the old and new disc and the old was .3145 and the new was .3360 not alot of difference.

Have a Case IH Farmall 31 that has a whinning noise when you release the clutch pedal. Once the pedal is depressed the noose goes away. I just split the tractor and replaced the release bearing.

It did look like lint and sludge.

That is the suction screen and it has a spin on already.

Here is what the screen looked like when I pulled it

I have a Farmtrac 535 that they hydraulics are jerky. I changed the fluid and filter ans cleaned the suction screen/filter by the left foot. It seemed to work better after changed and then I let it set for about a week and it's aherky again. I did not use it a lot after changing the fluid and...

The tractor turns over fine but only starts when you let go of the key.

Do you have the manual or know where to get one?

So how did it go? I am trying to split a Longtrac 360 DTC, and it came apart about an inch and just stopped. I can not get more than an inch gap between the engine and transmission.

Was the manual helpful? I am trying to split one and it's not wanting to come apart

So have a GC2300 with oil in the radiator. Does anyone know if this unit runs hydraic fluid through part of the radiator to help cool it ?

is there a service manual online ?

Yes, sir thanks for that. So I have come to the conclusion the rack is stuck inside the pump. I am in the process of pulling it off now that I have the “assembly marks” lined up. It slides back about a half inch with all the bolts out and hangs up.

So the cable is moving smoothly and it does not respond when operating at the injector pump. I took the front cover off for the timing gear and from what I can tell it's out of time. Does anyone have a service manual for a 4020R. Looking at other models the timing is way off. But this photo is...

Do you still have the Branson 4020R manuals? My email is mikehcovington@gmail.com

Have a Branson 4020R that the foot peal and levee for throttle dropped working. If you use the throttle control on the console the throttle lever on the pump seems to stick but still does not accelerate with the foot pedal or the throttle lever on the console. Any suggestions would be greatly...

Thank you for answering my million dollar queestion. I was able to find the part numbers in the book once you said they are adjustment screws for the brake drums. So where would one find those missing itms since no one seems to have new ones. Do you know if a salvage tard that has Long tractors?

Does anyone have access to a Long 560 owners manual?

The one to the left of the drain plug in the second photo

I have a Long 560 tractor with a hydraulic leak from the transmission case. The drain plug and two holes in line with the axles and drain plug are on the bottom side of the case. One hole is plugged with a bolt and jam nut. The other hole is wide open and the parts manual does not show anything...

Thanks you I believe I found the correct parts at Toad Marine. Question…. When the timing notches are all in line, is the notch in the plunger suppose to be up or down? I assume notch down and sold side of the plunger is up but we all know what can happen when assuming.

Awesome thank you!!! That narrows the search down tremendously!!!

I have a John Deere 650 tractor that I was in the process of cleaning up a rusted injector pump and one of the small pins that hold the rollers in flew across the shop. Does anyone know where I can get the pin and wire that hold the pins in place ? Items 39,40,41 and 42 in attached photo.

joecdeere, are you still around and able to help out with a tech manual on how to remove the fuel tank on my John Deere 950? mikehcovington@gmail.com Thanks in advance for any assistance.