Search results

🙏

Buddy has Reolink Cameras on his off grind Cabin and has had good luck with them. Solar panels seam to keep them charged good even in the winter.

I bought Guta brand for my 5th wheel. We got a newer 5th wheel this year and found out that the GM ones that are able to read on my truck don't got above 100psi. New 5th wheel tires are 110psi so I bought the Guta brand and so far it has work very well after 4 trips. They have one that will...

Mine takes a minute to stop the transmission before I can engage without grinding. Make sure you push clutch all the way down and wait. Been that was since new. Also echo what @hodge says.

No Have not heard yet what happened other than started turn too late.

Close call in Port Huron by the American Spirt

I look at the 5400 when I was upgrading. The layout of the cab was no comparison to the Kioti. Plus Lift Capacity of the Kioti was much better. Dealer has a lot to do with it also and I am real happy with my dealer and a lot closer. Never regretted gong with the Kioti. With that I have never...

I not had any problem with mine so far. Like mentioned above might us some Biocide once in awhile. I add in the winter if we don't get much snow and it sits.

So sorry to hear. Thoughts and prayers 🙏😔

Wow Thanks for the update. Nice when the problem is found 👍

Nice grapple. Wish I would have checked them out before I bought mine. Happy with mine but would have rather given Kioti and Dealer the business. 5elevenDesignz.com makes a nice Grill Guard also. Justin is a good guy and will take care of you.

Not yet but getting a parts list together for the baler and rakes.

Many come with hydraulic oil in front of axle. I had some leaking. Did some reading on Kioti forum and checked with my dealer and a lot of guys switched it to 80w90. When I did mine I switched it to 80w90 and have had no problems and no leaking.

Nice Congrats. Nice Tractor. 👍

My understanding is it shouldn't effect them to bad as S. Korea as a fair trade agreement with the US.

I would definitely get some 3 point ballast if you're going to have your loader all the way up and extended boom. Breakout force is listed as 5369 lbs.

Agree with their website. It definitely needs improvement. Yes I didn't notice that but I did not build mine on the website. The dealer asked me what tires I wanted when I ordered. Depends on what you are doing with it. I went R1 due to what I am doing with the tractor. R14 I have heard good...

Couple I have in my photos. Don't have any of My atv plowing snow but have one afterward thaw out in the shop.

Can you call a Kioti dealer and get the information you need?

Good Goals and sounds like a great retirement. I'm in the U.P. a lot and is a great place to be. Wish I would have retired up there also but hard to leave current roots in the Lower. Good luck and keep us posted where you end up.

I see the Locks are gonna open a little early this year. March 21st.

Kind of forgot about this. I have had that problem from time to time on my RX last year. I would turn the A/C off then back on and it would work fine. I will definitely check my belt tension. Thanks

Nice. Update on how you like.

I try to in the next couple days.

Dealer installed when I ordered tractor. I believe the RX now are all prepped for 3rd function now and holes are already there.

I have not noticed it that bad on mine. Did notice that mine does have a Rubber tip on the handle. No sure if dealer did that or came from factory that way. I have heard other guys complain about it. I wonder if you could dip them in handle dip.

Need more let me know.

I can take some pics when I get out to the shop later this morning

Nice Tractors made by Kioti. If you have a Kioti dealer near you, might want to check on the price. Sometimes for the same price or Kioti a little less.

I keep mine above 1500 rpms even when sitting. I idle it up if sitting still Get a hydraulic top link. They are awesome to be able to adjust an implement. I got a quick hitch for mine also which is cat 1 and I did have to grind the balls slightly to make them fit. Draft control was made for...

My shop has a floor drains but I use a car snow Brush to get most of it off before putting tractors away. With using mostly wood heat in shop also the humidity is low so what ever pools dries up in a hurry. House garage is heated but no floor drain. Floor slopes to the overhead door so I just...

Justin makes some awesome products. Sure am happy with Mine.

Great video. Mike got to go on the Mackinaw

Decent video on the topic

Nice install. Been going to do that on My 7320 but gotta decide if I'm gonna replace it with a 7340 first 😂

Nice thanks for the post. Will be looking forward to updates on how it is doing and how you like it. I will definitely be checking one out when I get a chance.

Nothing here so far but a dusting on Thursday

Start checking your safety switch. I would start with the seat switch. Had to replace mine several years ago.

Anderson upbound through Port Huron just a bit ago.

Keep forgetting to tell everyone who like watching ships. This guy has a great Youtube channel and is great to watch if anyone interested.

There are several stores that carry carport kits. You could set on beside the shipping container. I had bough mine and had it installed by a company here due to the size. Mine is 18'X45'.

Yep carports are nice. I have one for my 5th wheel and also wish I would have went bigger. I move it over in the winter and get some totes in so I don't have far to go get a full one.

Nice setup and good helpers. I use totes also but never tried to stack them. Do they hold up stacked Ok? I use the tanks for roofs so I heap them up. Been thinking about stacking some to take up less room, and get a carport like you got to put them in.

Like I said in JD forum I have no problems with R1's in snow and would have the rears loaded or buy chains instead of another set of tires

Good to hear. I have been very happy with Mine.

Be interesting to see. I added a beacon to mine and had roof off and don't remember having any problem getting to everything.

Getting some big oak round and Ash split and will be loading into totes for next winter. Try to keep a year ahead.

The New RX7340 now has a Buddy Seat if you want to see if any are in stock now. They are more Money but some nice upgrades. Dealers are just starting to get them in and I am waiting for my dealer to get one. With That I love my '21 RX7320. It is has been a great tractor and is a tank. When new...

Forks or Bale spear is what you will need to life them. Bale spear is my preferred so you don't not break Twine or net wrap. 3032 should life them with proper ballast as stated above. I am able to lift them with my 790 if I have to.

Can have issues with any Brand. Have had ,and still have JD and had some issues. Newest is a Kioti and very happy with it. Could not Justify cost of JD and Kubota plus JD I couldn't get tractor with options I wanted so went Kioti. Did have the fuel tank split but Dealer was on it and replaced...

Have both but I use Cab tractor most of the time. Tired of hot weather and eating dust and feels good staying out of elements in winter. Several hours when wind is blowing 90mph and wind chill below zero.

Nice choice I have the Cab model and love it. Although I will look at the new 7340 when it reaches my dealer.

Not sure if I am following you but my 7320 rims are 2 piece. Centers bolt to rim for adjustment. I would think you could find them somewhere.

I have a 24K Generac I had put in just over 2 years ago. No problems and think it was $10K installed. Only has 12 hours on it. We have only been out a couple hours since put in lol.

Keep forgetting to fix that. Mid Michigan

Sure is here. We have fields we have not cut yet this year. We are over 11" this month alone.

Yep but in the U.P. a lot. Cabin North of Amasa.

Was up at the Soo camping for 4 days. Had a great time watching the freighters going by. Seen the Clarke getting supplies

I agree with the above posts. Sounds like radiator may be restricted from debris. I use these (radiator Genie)all the time and they help keep fins clean.

Nope just out with some buddies

Sure did.

I also have been waiting for more info on it also. I would consider new also.They had one at the National Farm Machinery Show this year but I didn't make it there. I need to stop at my dealer and ask him.

Couple pics when we were Out fishing yesterday Morning and the Anderson coming out of the fog.

We had a problem with Uncle's JD790. After 2 burnt up Solenoids, changed relays etc., we ended up putting a momentary button it to energize solenoid to start it. Been working fine. Like 1Mech said, if you do that make sure you fuse it.

No cutting here yet. Waist high but can get a long enough window to cut.

2015 Thread.. A lot has changed

Not yet we are just now getting warm. Plenty of moisture but we have been cool. Starting to grow pretty good now.

I gotten filter and parts from Tractorparts4less.com. Fast shipping and great to deal with. They are S&H farm supply which is a big company serving several brands and farm supplies.

Spool inside is probably stuck. Here is a good video on how to unstick. I know Ken and Tim and they know their stuff.

Thanks for the info 👍

Guess it’s back up here in Michigan

Just get a hydraulic pressure guage and a short piece of hydraulic hose. A quick coupler and hook to one of the loader ports and check pressure. My 790 was low and shimmed and increased pressure. I increased it about 300psi and made a big difference. If I remember right you don’t want to go over...

I’ll have to time mine sometime. It does seam slower than other tractors I’ve run but not that bad. Don’t think I payed attention until guys started mentioning it.

Caught the live cam of the LAT yesterday coming into Duluth. Took some scene shots

My 2 cents is Dealer makes a big difference. Two years ago when I went to step up to a bigger tractor I researched many brands and also had to decided rather to move away from JD. Kabota and Kioti had the next closet dealers and had awesome experience with Kioti so that’s the way I went and have...

My Rx7320 starts blowing warm air before gauge comes up. Depending on how cold it is outside,it takes a long time before it moves and gets up to normal range. Think it’s the nature of the beast. Hour meter cant help you on. Mine seams to be fairly accurate

Following. I’d like to get service manual for mine also. Was gonna ask my dealer next time I’m there

So did you get your answer? Little confusing. My 7320 when you punch the brake pedal it will stop the tractor but yea you want to push the clutch button or pedal if you want to stop. It also engages the 4wd for better stopping also and you will see the 4wd light up

We have some hay fields about 3 miles away so I do road some. Most of the way is dirt and now having a cab tractor for most of my hay sure makes reading better also.

How’s that work? Was thinking about getting one. Does it stay clamped on forks good?

Getting ready to watch the Alpena and the Anderson come threw on the Port Huron Live feed.

I was watching that on the live also.👍

Let it Snow ❄️❄️Love seat time in the winter.