Search results

22’ split tilt 4.5-18 x14k GVW Hauling my new used M59 TLB——8,800lb.

Great to hear that it’s a good choice:). I felt that way but hearing it from experienced users helps lots! Thanks

Thanks for that info! Yes-very heavy. I dug out my 3pt hitch links for my L48 sale. Very heavy:).

Does anyone know if the M62 and M59 buckets and QC systems are the same? If so the thumb should fit either? If not a thumb design mod would be needed. I can get a M62 thumb but will it fit my M59 properly? Thanks for sharing:).

I have purchased a new to me M59. I’m selling my 24’ 12k bumper pull drop ramp trailer. Thinking to purchase a 22.5’ 4.5’ —-18’ tilt x14k Unit. My thoughts? Easier loading Safer loading Lower center of gravity Good match? Overlooked issues? Experience? Thanks!!!!

The zero clearance reborn high eff fireplaces are top shelf these days. I installed an Englenook years ago and can heat my 2800sf home easy during a 10f day if I want. It looks like and has the beauty of a true fireplace:). Not a wood stove in the wall! My trouble is my back has reduced my...

It threw the error 85 or 84 code? The one saying it’s the foot throttle sensor, another saying the forward servo. I felt those down stream of the throttle were triggered by the throttle. I did not check the code after changing the control. No info in the control box telling me what to do...

Most parts are Kubota sourced. Some I go to other vendors for design, quality or on occasion, price. Seat is one thing The thumb will be another I found the OEM Kubota on/off third function switch from the UK for 75$. USA Kubota wants 191$. I want them to survive but yikes!

You have done a number of upgrades that only closeup pictures do justice. Yes, I too plan to address that control, not sure how?

Update on what a TM Controller is? Can not find it on the Coleman Electrical site? Other sources say there are 2 but I have not found them—-only the ECU. Next week the service place says they will start on the unit. 🤞🤞🤞

Smokey dog, yes I will starts thumb thread. It will also help me sort through the options once more before purchase. Just a short note on the options: One uses solid round stock torque bars between claws of 3/4” R400 and they make the cylinders to match for dozens of models—-2400$. With...

Gentlemen, do the TM fuses control the transmission and motor controller? If so it’s possible one of them is bad? I tested all the fuses before I parked it but not after the “no go” issue? Could it be that? Hope so as it would mean little chance of mechanical issues? Just a bit of...

I’m hoping the service is good. No word from them yet on the no go issue? Do any of you know what the TW fuse is? When I get it back I will science out a way to modify the seat swing/height that would allow an in seat rotation. That would really make the M59 better:). My hoe bucket is...

I’m crossing my fingers as they are well thought of and I hope they can restore it to near normal operations? They (service place)also sell and service Bobcat so it’s a must to have a decent hydraulics technician and proper test equipment. In any case, I have lots to do And enjoy with this...

If I’m seeing it right the bucket curdles a bit higher and the thumb is then a bit short with the different bucket adapter? That adapter allows for more and lower cost easier to find buckets? I looked up the USA attachment item and saw a thumb. Is that what I should have been looking for?

Hello gang! I am looking for a 3point hitch set for my M59. Kubota wants 700$+ for them. There must be some out there at a reasonable cost? No?

Oh- and my new used M59 did not have the 3point hitch arms on it? Anyone know where to get some other than 700$ from Kubota?

Ok- saw this post and have something to share: My background-45 years HVAC, 30 years construction teacher, studied super insulation and heating systems, built 125 homes from scratch. Oh, and 12 years of wood heating. In the UP of mi. Lots of wood heating. I have designed and built in many...

Love to see it—-where?

I have my M59 at the service place?? I want them to check and adjust the hydraulics as they have experts and equipment to make fast work of it. I hope:). I’m shopping 4-1 buckets with teeth for it as I love the one on my L48. I can do so much more with it then any no tooth/standard bucket...

Yes, all good info. I’m going to send a note to dealer on the BH/ 3 point hitch valves as they looked right but could have not been fully engaged? Slower than my 48? Something is wrong?

Had to take a second look:) I really like the guard shield built into your mounting system! Clever. A plan to steal🤪🤪🤪. I often carry a chain saw along. Been electric now that they have gotten stronger:). I carry chains all the time. I do plan on fabbing a couple of tool carriers for...

On my L48 I could lay bucket flat then roll it down and that would lift the machine front. I could left the rear with the hoe and swing it easily. Can do neither with the 59? Sounds like you can so mine has some issue? Hope it’s just pressure adjustments? The loader lift speed is slower...

Yup, same as mine. Exposed! I had no panels on mine as they had been ripped off! I ordered new ones and when all mechanics is working good, the new panels will go on.

Super- thanks again! I thought maybe a couple of the wires are to power the led indicator. I’ll get one asap

Looks like some slick tool carriers you fabricated up! Nice:). I have to do some of that too. The metal they use is a bit thin for brush work:(. Question: Can you lift the front of your machine with your bucket forward roll? I fear my unit has weak hydraulics or not adjusted with the...

Super! Thank you so much:). So that switch is a single pull single throw? I thought there were 4 wires going to it meaning maybe something different? If yours had only 2 wires then that’s what I will do. Yes, the loader valve is mounted on the outside of the frame? My protective covers...

I used a vise grip and a small flat nail bar to pry them off. Same function. Yours is nicer on the metal lever arms. As I mentioned- I really need a new push button third function switch?:).

Great pictures and info! Your cover panel is in much better condition than mine:). Yes, I tool it off to see what linkages did what and if something was off? Nope. That wire is short and I disconnected it pulling too hard by accident so I’ll check on it tomorrow. Also, my unit had the front...

I’ll try again. The codes on the panel. As my memory serves? Push both the speed button and mode at the same time. Turn key to start. Then ABCD appears, push mode again to get EFGHI then select G and toggle through error codes if they appear? Best I can remember:))))

Yes, I read that. My column speed shifter seams to trigger properly as read on the panel. Still may be but does not seam to be it? I’m going to double check the reaction control rotary switch tomorrow? Could be as I took the cover panel off and had to remove that switch? May have...

I used the info from an old post? As I recall: you push both the Display mode and Travel speed buttons on the control council and while held down turn key to start ABCD shows then push Display again and EFGH and others show then hit Travel to see what code is displayed I think you can...

I did look back at the older posts but will now look at the other in case? Thanks! I’m just totally befuddled? Work good. Parked it for a weekend then no go?

Update: Shift lever is good Tried all ranges -no go Clutch latch is not engaged Could a spot of frozen water in a fluid port cause it? Been mid 30 but just a question?????

I replaced the throttle sensor as the error code indicated. No change? All things including hydraulic functions are good. No known lockouts are engaged. It was running good then a couple days after parked —-no good? It goes into gear. Clutch sound like it’s engaging and loaded by...

I have a used M59. Drove ok first time I tried it but after parking it for a couple days it would not move? Replaced the throttle sensor control as error indicated. No go:(. Thoughts? Input? Experience? Thanks!!!!

Its a 2009. It is a fly by wire. The Pedal control reostat sends info to the CEU and that sends comands to the HST servos. I ran a check on the errors thanks to the info posted some time ago on this site and found the HST error 81 and throttle error 84 and forward proportional valve error...

Hello, I am in process of trying to fix now. I disconnected the battery and left it off for a while as one person said that can reset the ECM? I checked the pedal connector and added some anti ox grease. I will track down the cable you mention? My throttle advance is working so if...

Hello to all, I have made the move from an L48 to a used M59. It needed some tlc as it was a rental I think. I fixed up the hood and side panels. Repaired the steps and some cover plates. Time to hop on/?? I ran it around the yard a bit a few days ago , all seamed OK. After parking it...