Search results

SOLD!

I never got to use this. The original owner said it was only used once. The condition of the impeller and chute areas would lead me to believe it hasn't been used much. I serviced this blower so it is ready to go to work. I greased all of the fittings, took the PTO shaft apart and greased the...

I've narrowed my search down to the SB1064 and the B64C snow blowers and would like to hear from people that own either one of them. The Blizzard has a 15" auger, 24" impeller and weighs 531 lbs. The LP has a 14" auger, a 20" impeller and weighs 390 lbs. The stats suggest the Blizzard is a...

Purchasing a LX3310 with a BH and would like to hear from people as to the best thumb to buy. Factory thumb or aftermarket thumb such as the BXpanded Barracuda factory mount thumb? I've never owned a BH so all information will be welcomed!

I'm updating from a BX2200D to a LX3310 and hate the thought of buying a new MMM when the one I have is in excellent condition. The dealer, of course, says I need a new MMM. If someone has a LX3310 with a MMM, could you please share photos of how the MMM attaches to the tractor? Has anyone used...

I have a 2001 BX2200 with less then 700 hrs on it. I've changed the hydro oil and filter several times, with Kubota oil & filters, never finding metal filings in the used oil. The oil is at the full mark on the stick. The problem I'm having is with the loader bucket. Sometimes when I set the...

I'm trying to help a friend get his 2240 running. I found out the circuit breaker needs to be replaced but there is something else wrong in the starting circuit. The tractor will start if you jumper the starter solenoid. He told me the tractor would start fine in the morning but after he had...

I went to open the hood to check the oil on my JD LX277 and a big chuck of it broke off in my hand. I'd like to ask if someone in this forum has a hood they would sell or know someplace in the MA-RI area that sells used parts. My wife had already put a big crack down the side of it a few years...

Sorry, wrong forum! Moved to JD.

I got to use the snowblower yesterday for the first time and it worked great. I had put a piece of 1/16" stock under the blade and adjusted the skids to the ground. Today I went out to do a little clean up around the edges and snagged a corner of a tarp which then wrapped around the auger. I...

I prepared the BX2200 for the winter season this past weekend. I bought the Puma 54" snowblower at the end of last season so am looking forward to trying it out. The manual that comes with it doesn't give any detailed installation instructions so I'd like to know a few things. Do I set the Puma...

Attempting to replace the seals in the steering cylinder, I can't get the shaft to come out of the cylinder. I'm trying to remove the shaft from the end that has the hose fitting at a 15 degree angle (left side from seat). The wiper ring is out of the bore about a 1/4" and I can spin it on the...

My new Puma 54 arrived yesterday so there will be no more snow this season in MA! Am I wrong to be a little upset with the condition of this new snowblower and should I call the dealer and complain or just accept it? There are numerous places that the paint has been replaced with rust including...

OK, so I'm about to pull the trigger on buying a rear mount snowblower for my BX2200. My question now is how do I connect the hydraulic chute rotator and probably a hydraulic defector into my tractor's system? Do I tee into the lines going to the FEL joystick and connect these to another 4 way...

Has anyone found and dealt with a 3ph snowblower dealer in MA that sells other the Kubota units? The closest Ber-vac dealer I found was in Maine and Pronovost was in NY or PA!. The 52" Ber-vac is $2600 and the Kubota is $2500. How do these compare to each other? The Ber-vac says recommended hp...

After clearing the snow today and finding I'm running out of room to put the piles, I'm thinking more about a snowblower. A neighbor's driveway is gravel, drops off fairly steeply from the street and then levels off. I have a plow mounted to the FEL so keeping it in the float position allows me...

Hi, I just bought a used LT160 and would like to buy a 7 bushel rear bagger (no blower) for the 42" deck. Could someone tell me the correct part number for it? All I could find on the JD site was individual components. When I asked a dealer he just said it would be around $500 and is listed in...

This brushcutter was my father-in-law's and I have no manuals for it. I'd like to know what the fuel/oil ratio is. I couldn't find any info about it on the Echo site either. Does anyone know where I could get a manual? Thanks.

Does anyone have a LT160 diagram they could email me or put up on the web? I have a no start condition but if I put 12V on the starter relay coil the engine will turn over. I checked the seat switch and it is functioning- continuity between the two middle contacts and also between the two outer...

I seem to remember a thread about this but the search feature didn't find it. A friend is having trouble getting the PTO to engage on his BX2200. He said he has had problems with it since it was new but never told the dealer of his problem. His son has lubricated all the linkage that he could...

This is a 5' Cycle Country plow that I attached to the bucket of my BX2200. I cut the push tube and welded on a 2" sq tube. I then welded tabs made out of 1/4' stock to the ends of the sq tubing. The brackets in the bucket are 2.5" angle iron. It's very fast to install and remove in case I have...

to pay for a used Kubota snowthrower that fits on a BX2200?

Well I'm still trying to decide between an ATV plow attached to the FEL or using a back blade. I've never had to use the 3 pt hitch before and looking over the manual I see there is no "float" position for it like the FEL or once the blade touches the driveway do you put the lever in the neutral...

Has anyone installed a Warn ATV snow plow on a BX loader? A 6' plow and frame are only about $300 which doesn't seem bad.

I was thinking of trading my BX2200 for a BX24 so that I'd have a backhoe but the dealer said buying the Woods BH6000 would cost me a lot less money then trading. He gave me a price of $5500 for one that I install myself. Does anyone have one on their BX2200? I'd like some feedback on this...

I started out blaming the neighbors cat for coming over and relieving himself on the tractor's rear wheels. I cleaned them off and then parked it in the garage and when I went back out a few days later the wheels were wet again. I knew nothing could have gotten into the garage so I knew it was...

Here it is the middle of January and it has been in the 50's yesterday and today in Massachusetts. Here is my snow removal team waiting for something to do!

Here it is the middle of January and it is 55 degrees today in Massachusetts. Here is my snow removal team waiting for something to do!

Could anyone tell me if K2561-82140 is also the number of the updated air cleaner support? This is the pn that is in my parts manual and what the dealer has in stock. I've read in some posts that there is a redesigned one available and I don't want to put the same breakable style back on. On...

Has anyone found a golf cart cab that will fit over the OEM BX2200 canopy (sun shield) or is sandwiching it under the canopy the only way to make it fit? What are the dimensions of cabs that you have used in either case. Thanks in advance.

Could someone tell me where to get a cover for the midmount pto shaft on a BX2200? I'd like to keep it clean when I don't have the mm mower installed and the dealer doesn't have a listing for one. Thanks and <font color="red"> Happy <font color="green"> Holidays !

I have a short in the headlight circuit and was wondering if anyone else with a BX2200 has had this problem. There is a brown wire coming from the hl switch and brown wires going to the headlights but the wires going to the taillights are white. The schematic I have shows brown wires going to...

My neighbor has this old MF with a rototiller on the back. His problem is when he tries to raise the tiller it is awfully slow now and as soon as he shuts the tractor off it goes back down. A mechanic told him the pump has a lot of pressure but has to be replaced. Could the control valve (to...

Does anyone know where I can get a service manual for my 149? Right now I'm trying to find out how to adjust the steering box play. Thanks for any info.

The 15 amp fuse that is for my gauges and instrument panel lights blows quite often. I replace it and it lasts for a couple of weeks to a month and then blows again. Does anyone else have this problem. The tractor will still start and run without it. Does anyone have a wiring diagram of this...

Does anyone know the Delco-Remy part number for the voltage regulator on my 149? The IH # is IH-545130-R92. Thanks for your help!

I have a Cub Cadet 149 that I want to change the hydrostatic fluid in. Does anyone know a brand and type of hydraulic oil that replaces the Hy-tran fluid called out for in the owners manual? Thanks for your help.