Search results

(2) Titan 17.5-24 R4 Tires (rear) mounted on Kubota Rims 95%+ Loaded with WSW. Excellent Condition $1600 both (2) Titan 10.0-16.5 R4 Tires (fronts)mounted on Kubota Rims 95% Excellent condition $700 both. All four $2200

Keep your fingers crossed, it took 15 yrs for mine to leak.

My 4740 has gotten worse, leaks when parked. Monday I split tractor and ordered all parts. Parts including filters came to $303.00, I still need three 5 gal pails of Super UDT2, another $400+. It’s not a hard job, the most part is to support both half’s.

When I’m working the Tractor hard fluid leaks from drain plug. I realize what the problem is,( front axle propeller shaft seal)I know I’m going to split tractor to replace seal, if you done this before is there any helpful advise and/or parts that need to be replaced based on your past experience?

Thanks

Predators fit perfectly. Great mulching blades. Thanks for all your help.

Your probably correct they aren’t the same blades you have. This is where I ordered they from, they list them to fit ZD326. My ZD ORIGINAL blade number is K5647-34340, it crosses over to the blades I received. Gator blades maybe good,but the company’s cross over isn’t what it should be.I’ll...

Ordered Predator Blades, work great, torqued to specs. Gator blades measure .200 “ thick,original Kubota blades measure.250”. New Predator blades measure .250”. Gator blades are noticeable thinner cheaper blades, l’m betting anyone using them tightens them with a impact wrench and does torque...

No, I checked washers when I couldn’t tighten blades.These blades are very thin. Blade bolt has a flange it is bottoms out.

I ordered my gGator blades from Walmart.com, they show a ZD326 takes blade 96-363??? That’s the blade’s I have. Going to try returning.

Ordered three gator blades for my 60” ZD326. I wanted these blades for mulching leafs with my vacuum. Blades are exactly the same size,width as original Kubota blades, except thickness is less. I tried installing,everything fit perfectly but blades will not tighten up. They feel tight but when...

Thinking about Rear tire chains for L4740-3. I have R4 tires and live on the side of a mountain, my black topped road/drive way is 1/4 mile long. My tire size is 17.5L-24 will chains fit without spacers? It seems I can gain a few inches by moving the hub to the inside of rim. What type chain...

I have a B3030 and I知 considering putting tire chains on it, has anyone successfully put rear chains on R4 tires, does it need wheel spacers, if so what size, what type of chain are you using? I値l be on black top all the time.

My lawn is compacted from years of running over it. I’m very interested in purchasing a Landpride Plugger, I live in a rocky area, clay soil and some surface tree roots. Does anyone use a 3 pt hitch plugger? I’m thinking a 48” to pull with my B3030, local dealer/salesman said they don’t work, I...

Page from my service manual, I had it here at the house, tomorrow I'll get the part number of the manual, it at my garage.

Kubota L4740 PTO will not shut off, tractor has 170 hrs, I split tractor to remove PTO clutch pack, clutch disc and steel plates welded together, clutch pack shows heat present. Replaced clutch pack,seals gaskets,filters and fluid. Kubota repair manual describe's checking and adjusting Pressure...

2012 Kubota L4740, HST Plus, Loaded R-4's,180hr's Teir 3, Excellent Condition, Includes 84" Kubota snow/dirt plow, power angle.

2012 Kubota L4740, 180hrs, Teir 3, Loaded R-4's, HST Plus, Includes 84" Kubota snow.dirt power angle Plow. It's in excellent Condition

I Have a L4740 with 170hrs , ordered it with R4's and I'm not happy. I'm think of selling them, fronts are Titan 10-16.5 6ply w/rims, rears Titan 17.5L-24 6 ply w/ rims (no center disk) All look as if new, rears are loaded with W/S. I'm thinking I should get $1500.00 for everything, does that...

Considering purchasing a L3560 (foldable ROPS)with BH92 and Loader with AG's can anyone give me the overall height of Backhoe when locked/stored for travel.

I have a L4740 with R-4's, I don't have a loader, I picked R-4's at my dealer advise telling me they were just as good as R-1's Plowing snow, MY OPINION THEY AREN'T.My last tractor Had R-1's, they were some..... better in snow, without a question better in mud. My question, anyone know if any...

IF I change my r-4's to r-1 on a L4740 what size do I go with? Do they make a radial Tire for this size tractor, front and rear. Any difference with traction radial vs bias tire

I have a L4740 HST, the pto is turn on and off by an electric switch, today the PTO will not shut off, it keeps running with switch on (PTO indicator on dash on) or switch off,(PTO Indicator on dash off) pto still runs. If clutch is pushed in it will stop. Any on run into this?

I see on the Kubota web site, they now offer a rubber cutting edge for the 84" snow plow. I called Messicks and Neil said they are available. I just wondering if anyone has any experience with this, I'm having my road/driveway black topped this summer and looking for something that will be...

Kubota has brackets and weights that mount on the rear of the ZD Mower, has anyone installed these weights on your Zero Turn, if so do you notice any stability or traction improvements?

Any one know where I can find a 2013 Kubota Calendar.Local Dealers don't have them.

Plowing this weekend I noticed every so often my P/S would get hard,almost as if I lost it or there was something binding. After finishing plowing, tractor was put in garage to melt off. I retried P/S, it appeared it would bind while turning wheels to the left, raised front end and retired...

I'm looking to purchase a rubber cuttung edge for my 84" plow, I have a gravel parking lot and a 1/2 mile of uneaven blacktop road (Worn from truck traffic) I'm thinking rubber will have more "give" Has anyone used the rubber cutting edge from Kubota, How did it work?

Purchased a air filter for the L4740, it doesn't fit. I did alot of checking with a few Kubota dealers and very few (only one solved this problem) the L4740 tier III takes a special air filter, dealer cost is $80.00. Most Kubota dealers said there is only one filter for this tractor. Messick's...

Thinking about loading the rear tires on my L4200, any Idea what tire shops or dealer would charge. I want either windsheild wash or Rim Guard.

Kubota L4200 GST in excellent condition,4wd,PS, 470hrs, includes a Kubota 6ft snow/dirt plow, quick Hitch( not loader type)tractor has been garage kept, could pass as new as far as condition, no leaks,runs excellent. I have no idea what to ask for it?

I only have 12 hrs on my new L4740,(so it's still new to me) yesterday while using it, I noticed there is no mark on the tach indicating where 540rpm for pto speed should be set at. Why?

Years ago when I purchased a Kubota tractor, I always received a calendar, and a Christmas Card thanking me for the business, back then a tractor was under $20,000. This year I spent over $40,000 and not a Christmas Card, nothing. I guess this is the changing times and the different generations...

I purchased a Quick Hitch Snow Plow Frame w/72" blade. The instructions show when attaching the sub frame they have the blade disconnected, not sure if this is just for the first time or if you must always drop the blade then remove the frame. Anyone have a set up like this, if so how do you...

I'm looking for a Stihl dealer, seems the local one's have no idea what they are selling, I wanted to order items for brush cutter, I was told they won't fit, owners manual show it will fit, Long story short I'm looking for a dealer that knows what his is selling. Any susgestions, mail order is...

I have Christmas Trees that need trimming. Most are 8' to 10' tall. I see Sthil and Shindaiwa sell pole extension HEDGE TRIMMERS, my concern is the opening in the being large enough to accept the limb of an evergreen tree. The trimmer I have now is a Husqvarna hand unit, the opening on the blade...

After one month that I took delivery of a L4740 and a ZD326P, salesman called yesterday just to ask how both machines are working, and to reassure me that if I ever have a problem they are only a phone call away. I've purchased many Kubota's from other dealer's, this is the first time I've...

I saw a Kubota 326 that had bolt on rear splash sheilds,they were on a new Kubota,they were bolted under each fuel tank and extend out, has anyone seen these. I'm guessing they prevent mud from flying up and may even protect the fuel tanks. I'm looking for the part number. Thanks Ken

I have been trying to put an add on for my Kubota for a week now, still not seeing it, what am I doing wrong.

Kubota L4740 and ZD326 arrived early this morning, Purchased from Messick. Purchased both with delivery,both arrived in excellent condition. I highly recommend Messick. Picture's will come soon,probably after dark. Going to play now!

My Kubota B3030 is used mostly for mowing and backhoe/front end loader work in the summer, it just turned over to 60hrs, I have been using 15w40 Mobile Devcon. I have a good supply of Mobile ESP 5W40 Synthetic oil. Is this a good oil to run in my Kubota B3030.

B3030 with R-4 Loaded with windsheild Wash I was told to put so much air in, but I forgot, I checked and I have 9lbs in each when the valve stem is at 12:00, Tires seem to be squating so I put it up to 15 psi with back hoe installed. Any idea what the pressure should be?

I have a good supply of this oil and use this in my Diesel pickup,"Mobil Delvac 1 ESP 5W-40 is a fully synthetic supreme performance heavy duty diesel engine oil" I have a 1995 Kubota L4200, B3030 and a RTV900, all that are Diesel's,I would like to use in the above Kubota's and stock only one...

I just purchased a Kubota ZD21 runs great but every once in awhile it looses power, I pulled the tank, cleaned out totally, replaced all fuel lines,still having problem, I noticed today the fuel filter after the fuel pump is only 1/4 full, I tried to bleed it, removed hose and shifted filter in...

My L4200 needs a new seat,covreing starting to dry rot and crack. Is there anything out there that is better than a factory seat.

I'm looking for a replacement seat for the B3030.My dealer is out??? ANY advise!

I have a L4200 with a 6ft Kubota snow plow, I'm looking for the rubber cutting edge, has anyone use them, I have a long black topped drive way/road, and would like to hear from anyone using the rubber, and where I can order one. Thanks!

Has anyone converted there cooling system over to the Dex Cool (Pink). I replace my coolant every other year, and the green antifreeze is getting harder to purchase.