Search results

We have a new HD-10 and I keep kicking the hydraulics off on the tractor when we try to use it. If I slowly move the leavers, it will work. Normal speed, kicks the hydraulic lever off on the tractor. It is plumbed where the return line dumps back into the fill port on the tractor. Tractor is a...

Looking at getting an RTV 1140. I know they are hard to come by. What has been your experience in ordering or "getting on a list" for a piece of equipment. I've been told that Kubota may not honor the price and the interest rate until it shows up. I'm prepared to wait 6+ months, I don't really...

So I can’t find it it in the manual if you can set the clock to 12 hour time instead of the 24 hour time. Anyone know if you can change this setting? It’s set to 24 hour and I’d like to change it to 12. Thanks.

Our new M5-111 was delivered yesterday. Ready for Spring to get here so we can get it outside and see how she does. Its almost identical to our M8540 except for the DPF and DEF systems. Our 8540 has 3400 hours with no problems beside a few cables that have froze/locked up. We hope that this one...

Does it help to drip a frost free hydrant or is it better to turn them off? The hose is off and the hydrant is outside. We are expecting temperatures around 4 or lower this weekend. I'm trying to keep it from freezing as our Richie fountains always freeze.

This is on a delta goosekneck flat bed. It has single wheels with two axles. I had a blow out last summer with about 10,000lbs on the trailer. Replaced the tire and after that the trailer wants to shake, enough to rattle the dash in the truck. Its fine until it gets up to around 60MPH. I did...

Our tedder needs some parts and after talking to a vermeer dealer I may look at some aftermarket parts. Heres what we need, Disk that holds the tine arm 129663-001 Vermeer wants $350 for it Plates that go with the bolt for the tine 127061-001 $30 each at Vermeer My question is...

Has anyone had the pleasure of replacing the PTO shaft on a 8540 or 9540? Looking to see if its a job we can do or if it needs to go to a shop. If anyone's had one replaced at a shop what did it run you? A pto shaft sliding off from a batwing bushhog did the damage. We've filled and filled on...

We are building a metal hay flat with 10 inch channel as the sills and 3 inch channel as runners every 24 inches. The top will be treated 2x8s. Question is can you still bolt this set up to the running gear or should we use a chain or cable one on opposite corners? If we bolt it I'll use a grade...

So we just purchased a 6 row narrow 7000 corn planter. We have a 7000 4 row wide and we thought they were pretty much the same planter. I've discovered that they have different sprockets for the population settings. Basically the 6 row has fewer teeth with a longer chain and the 4 row has more...

We have a landpride batwing that we are having difficulties lowing the wings. It seems like the pto shafts on the wings are seizing up and won't allow the wings to come down. The hydraulics let gravity bring the wings down and I was wondering if we could add lines to the bottom of the cylinders...

I have what I believe to be a Danuser DH-1 Post Driver. I need to replace the rubber wheel that raises the driver. Has anyone had to do this and what cost should I expect to pay? Also are there any Dansuer dealers in Kentucky?

If you had to choose which one and why? Looking at either a Deere 6620 or a Case 16XX? We don't have a lot of acres but looking for an improvement from the old Massey. What are some things we should look for when checking these old beasts out? Really looking for the one that is the easiest to...

Can anyone tell me how to set the timing on a 5610 injection pump?

Just wanted to know if a truck toolbox would interfere with a gooseneck trailer. The truck is a 2008 F250 with the short bed. Thanks

This weekend I made the journey down to Union City TN at abernathy's and came home with the honda. Its a 2011 Foreman manual without power steering. Had a question about the fan, is it safe to turn the ATV off when the fan is running??

Our new baler will not cut the twine when it finishes putting the twine on. This is the second time it has been back from the dealer with no luck. Is this twine arm design the same on all vermeer balers?? I'm hoping this was just a dud from the factory as the dealer has made every possible...

I would like to use my 28 foot flatbed gooseneck with my tractor. I was hoping to haul hay (round bales) with it from the field to the barn. The trailer weighs 4900 lbs empty and is rated for 14000lbs. I've bought the trailer mover three point hitch attachment from tractor supply (rated at...

NH 492 Haybine with new Stub Guards After 19 years of use, we finally replaced all of the bottom stub guards on the haybine. Now the blades are locked against the top sections. Do those top guards have to have the shims to raise them, or could you just use a 7/16th washer to raise the top...

Sheriff's order destroys (moble) home SAYS HE HAD NO OTHER CHOICE TO CLEAR NICHOLAS COUNTY HIGHWAY BLOCKED FOR NINE HOURS Lexington News - Kentucky News | Lexington Herald-Leader

The bright lights no longer work on our M8540 no cab. The dim's work. When you turn on the bright痴, rear tail lights and dash lights come on but no headlights. Any ideas on what it could be?? Thanks in advanced.

Our corn harvest with the MF 540 Combine

We are having trouble getting our old 540 combine started. It has a remanufactured starter, solenoid, new 900 CCA battery, new cables and a new ignition switch. When we try to start it, it makes one click and stops. It does the same thing with the battery charger attached. The ends on the...

Just had 200 gallons of diesel stolen out of our tank and was wondering how you lock one of these pumps (Fillrite 700). Can you only do it at the power source (breaker/switch)? I figure they had a pretty large pickup tank to get away with that much. Any advice would be greatly appreciated.

Has anyone ever baled sweet corn stalks after you致e picked it? I just square baled 2 acres and wanted to make sure I wasn稚 going to make the cows sick if I feed it to them. I may end up using the bales for Halloween decorations if its not safe for the cows.

I've got a small leak from the bottom of the fuel tank around the drainage plug. Nothing has hit the bottom of the tank. We've replaced two seals, one o-ring that sits in the plate that mouts to the tank, and the washer/seal on the drainage bolt. Still leaking. The next step is to replace the...

I am considering building a pole building roof to store round bales. I'm thinking about something that is 40X80 with at least 17 feet of clearance. Eventually I壇 like to add sides to it, but I知 just focused on the roof now. Has anyone built something like this and what was the approximate cost...

How much hydraulic oil will I lose when I try and just change the filters on a M8540? I don't want to change the oil, but I know a lot will come out when I take the old filters off. Thanks!

We recently had to replace the injector pump on our Ford 5610 (1988) and I was curious as to why Injector Pumps are so expensive. We spent $1500 on the thing, but the tractor runs better than ever. The tractor had 2800 hours on it when it lost all power and we had to replace it. Thanks!

I'm looking for a new pressure washer to clean tractors and attachments. I don't plan on ever using it to clean siding or paint off of barns. I had a Craftsman 6.5HP Briggs and Stratton and it only lasted 2 years and now the pump is bad. Do the electric washers hold up longer than the gas...