Search results

was moving wood today and had a minute so I Took a pic of the 336 this morning to share, I enjoy seeing what everyone is working on so why not share a pic of the shed where the 336 lives and a pic of it waiting to go back to sleep.....

curious if any other have a buderus w a indirect hot water,1 year old almost and seems the indirect calls for warm up often...know its been cold but still seems to be using a bit of oil for heat and h\w ? 2000 sq ft home ,25 years old,use wood fire in basement as a supplement, any thoughts...

Is there anyone who has had success finding a spin on hyd filter-other than OE that performs well for the 336d ? Lots of talk about OE filter when hydraulics are involved,OE is expensive even though its only an annual chore,mine is due ,looking for suggestions ? More snow for thursday, get...

any success stories with hughesnet sattellite service, ? I have gen 4 for almost 3 years and its been nothing but a monthly pita, I hate to spend month after month on this but deregulation in northeast CT let charter off the hook from completing the areas that still require the service and no...

Need some advice for cold weather fluids,my 336 works great but takes a long time to warm up enough to operate the loader, recent service w filter and screen clean,good fluid just not sure if theres an option for cold weather ? Thoughts ? Thanks

anyone have any luck or reliability w their sat internet ? I spent another 75 mins w hughesnet last nite and still cant get any degree of reliable service from this provider ? Any thoughts or related experience is greatly appreciated, I am in NE CT and have no access to cable even though its in...

just changed the engine oil and filter,used delo 15-40 this time, had rotella prior,seems to like the delo better but not sure why..336d is due for hyd filter and fluid and screen cleaning as well, anyone with preference on hyd fluid,brand vs.cost ? How about the spin on filter,any luck w a...

trans filler cap for 336 ? I am looking for one,its yellow and screws on top of trans case to show fluid level in case and rear end, anyone have one ? Thanks From Connecticut

Anyone have suggestions on tightening up the joystick on yfl 1500 yanmar front end loader ? I dont have an issue per say just want to tighten up the joystick a bit, and all i see is these swivels and when i determine thats the problem...and i have not, where can they be bought ? Does anyone one...

changing the oil and filter on a 2004 f150 5.4 litre v8, calls for mtrcrft syn blend...looking for a bit of direction, seems a blend is just that,i have had good luck w conventional oils and change them regularly,first time on this motor,its turning 100k Thanks

I am selling a squeaky clean 1996 Ford, 100k miles, its 4wd,cab and a half,like new in every way,located in CT-send a pm for a pic or more detail-just need a smaller truck-hate to see it go....truck trades considered,set up for 5th wheel

looking for input on wiring a sub panel, transfer switch or just the kit that converts the panel with a lever on it....we seem to loos power alot and i dont wnat to backfeed the panel, i want to set it up once and be done, any ideas,suggestions ? Thank you~

this is how we roll in CT

attempting to add a few pics of my latest project,have some newer pics and things are moving along,

We have a clean 500 4wd, sportsman,needs no repairs and is very good shape, that we dont use much and are looking for a mule or utility vehicle either trade or sale, please email grainger12002@yahoo.com

wondering what my 1997 f250 sprcab-4wd might be worth ? Its in mint condition, (in & out)only used to pull our 5vr, just hit 100k,body and interior flawless, frame painted every year-hate to part w it but dont use it much.... From CT

I am in CT and having a hard time w hughesnet,We have some cable on part of my rd,but they wont complete the loop......no cell service either,I need some help finding bandwidth... My exp w hughesnet is awful, the service is sketchy at best, and the call center is obnoxious. is there anyone w...

any ideas for alternatives to t1-11 for siding my barn ? I have looked at smart board and the like,wondering if anyone has experience w anything comparable that comes pre primed w a warranty ? Thanks

Anyone have success witha pad floor instead of the conventional 4' frost wall and floor on their building ? We are doing a small barn 36 by 24 and getting mixed sugestions.... In new wngland it gets cold, my thoughts are for a full foundation but wow,the cost.... Thanks

anyone have a heater they like,easy on electricity and still make heat ? Looking for a small heater to supplement the bathroom and have not had much luck ... Thanks

I am looking for ideas on where to get info onmaterial lists and plans for a saltbox-carriage style garage to match my salt box style home. I am thinking 24 deep by 32 long,truss style roof, 2x8 construction, 10' ceiling height w loft-any thoughts on a helpful web site ? want to establish my...

Any of you leave your tractor or atv in 4wd ? I got sick of going in and out and since my work is off road I am leaving mine in 4wd, just easier and one less thin g to think about,especially handy when mowing and using the loader-

Anyone have success sealing a slight leak in foundation wall from inside ? We have very small leak in the area where the sewer pipe(black plastic) exits thru the foundation. I would like to try something to see if I can cure it ? Ideas ?? actually appears to be coming from just above the plastic...

How many of you routinly take the tractor in and out of 4wd? I dont do much road time and seem to leave mine in 4wd most of the time. Just curious if others do the same, mine also has a loader and its very handy in 4wd-

any ideas on freeing up the slide on the pto shaft from the mower ine is very stuck fromsitting and wont slide,had it hooked and it doesnt want to break free...

first time w the pto on the 336,is it recommended to slow the rpms then engage the lever,i assume the power shift will work like live power once turning,just looking for best operating method. Thanks !

Just a comment,the (knuckle) seal and repair sleeve for my 336 are really nice, they fit and seal great,very happy to resolve that issue, also replaced a hose that was leaking on the loader,this is a nice tractor to work on,very servicable- hopefully it will stop raining sometime and I can get...

There is a small lever behind the trans shifter handle, Wondered what this lever controls,its small and j shaped and on the cover behind the shifter,not on the column- Thanks

Does the front knucle seal usually require a bearing replacement? I am going to repair a badly leaking seal and notice some play in the l\f knuckle and wonder if the bearings are worn ? Is this is difficult or rather easy repair ,its a 336d Thanks !!

Hello All Just a note to say I enjoy the forum, and now have my new(to me)Yanmar,and am looking forward to well deserved seat time this week, any pointers ? Thanks from CT

I want to look at an iseki 3900 anyone know some spces on it ?

I am working on my super 66 baler,has a engine on it,need help with the wad chain. I replaced the chain,the bearing and need to knwo what attaches or connects the chain to the wad ram it self. It appears from the manual that there are 2 attaching bolts that attach something-anyone have knowlegde...

I am replacing an older interstate 12 volt d\c battery, thinking about the Optima,are they worth the xtra $$$ or should I replace with a like battery at a third the cost ? I have the trailer plugged in most of the time. TY

Hello from CT- I am trying to discourage my "friendly neighbor" to stay off my property which borders his. I have a large driveway that leads to a wood lot next to my house and cant keep this guy out, have tried signs,ropes,and they drive rite over. Talked with local authorities,lawyer and still...

The NH site offers little around the area where the chain connects,does anyone have a 66 model that is in one piece,or maybe a pic...I would be greatful for any direction. Thanks again

Wondering who may have a pic or could lend a hand with my baler, it has a wisconsin engine on it,runs great,my question is with the chain that runs from front to back under the ram arm area. The chain and tensioner broke,I have replaced both but lost what ever connects the chain to the packing...

any ideas on markets for replacement spindles, mower is only 5 years old....

7108 ford front end loader removal-looks straight forward,just wondering if theres a porven easy way to remove. Looks like there is a bolt on both sides of the bottom bracket,remove then flaps lay flat,do I leave bucket flat or what is best position ? Does it require weight in the bucket ?

Could someone who has lower arms on the 3pt (1520)model measure the distance from the post where they connect at the rear end-to the center of the hole where an implement hooks up. Trying to fabricate and need an idea of the distance or overall length. Thanks in advance

Anybody have a source for blades for a 60" mower by King Kutter ? it has 3 blades on it that need replacing- Thank you

Any ideas on a custom ballast for my 3pt. recently removed the rear ballast (backhoe)and now the rear end is light......would like to build something to add some substance. thanks for the input !

I am looking for 3pt arms and a drawbar for my 1620, Any Ideas on where I can find any of these ? The previous owner cant seem to find where he put them....

thought I would post my findings FYI, the pinion shaft is stripped on the front axle,looks like the tractor was driven on the road in 4wd,good news its fixable and not going to break the bank. First time my dealer has sold one, also going to send inquiry to factory,my dealer is great and thinks...

I have 4wd trouble w the 1620-1800 hrs,hydro,no other issues but lately the 4wd wont engage,looked at coupler and splines, all appear good,loooks to me that the problem is front end related, anybody have any experience with the 20 series, this has been bullet proof til now Thanks

Anybody provide any insight on the l300dt, I have an opportunity that I want to pull the trigger on, just looking for any weak points or obvious things-its a 2000 model year w la450s loader,500hrs in good shape for 10k-will need front tires but other than that.......... thank you

I need some help locating a pulley for my wizard tractor, its the pulley that bolts to the trans axle. Any help is greatly appreciated.

Wondering what ideas are out there to remove those nasty streaks on my RV-The WD40 works o.k. once its clean but I hvae some stubborn ones that need a little xtra,anyone tried scrubbing bath bubble cleaner or something like that ?

I am wondering about the 3321 2wd model, Anybody had a chance to work with one? Alos where can I get a comparison on one w a loader, 2wd model. Thanks

where is a good place to find some info on used Kubotas? I have a line on 2 and would like to do a little research Thank you

Little off subject, but anybody else tired of the rat race? I am tired of running from one thing to the next,day in and day out- All I want is to be able to pay my bills on time,spend time with my friends and family and get a little reward from the daily grind. IS that asking too much? Seems...

Anybody had any luck with a particular electric fencer ? I seem to go thru one every 6 mos or so,The fence is only a few hundred yrds long,and no branches or rotten,rusty wire-any thoughts?

There are 2 web sites for info-stats on tractors,tractordata is one,what is the other. I seem to have lost the address ........

Anyone have any experience with this model, got a chance for 2wd w G\B 360 loader,low hours,clean. Just wondering if anyone has used one at all-any input appreciated. Thank you

Any of you folks see the show-60 mins- last nite? Specifically the guy who had not cleaned his garage or helped with many chores, in many years?

Saw a nice site that mfgs bale spears and 3 point forks, in the $300 range,anybody have a name, I knew I should have wrote it down while I was looking at it.

Is anyone using Wix or Napa ? So far only option I see is for dealer(New Holland oil filter)If so whats the part number?

Is everybody replacing there factory battery w\a sealed on. I clean and paint mine couple of months and it never seems to hold up. I talked w the dealer and they dont want to hear it. I also removed a little juice from the battery because it was to close to the top, it helped but I still have...

Does anyone know where on the internet I can get some general info on these tractors? size,cost, h.p, dealers? thanks-

Just realized the clutch return spring on the TC35 was broken, anybody had the same problem? this tractor has very low hours on it,all the tractors I have had over the years this is the first clutch return spring I have ever seen brake, thought it note worthy,beautiful day here in CT today ...

need some input on these two models,looking at a possible purchase on the L3130,whats a fair price? how does everyone like there tractor,what would you do differently? your input is appreciated. A dealer referrence would be great also.

I am thinking of going back to a utility tractor and selling the TC35. It currently has 80 hrs on it,gear shift with loaded r4 tires,and the 16la loader,has deluxe 3pt and not a scratch. It is a great tractor just not heavy enough.What is a fair price if we decide to try to sell? Interest rates...

Where is a good internet site to view some of the different Yanmar models? They apprear to be a well made tractor.

I am wondering some opinions on a product that will remove those awful streaks on my R\V. What works good,is easy to apply and will last more than the next rain? thank you-

Whats the HP and how much should I pay for one ? It has a Kubota loader and is real nice shape,also 4wd approx600hrs.

PTO Tip: If you are mowing and disenagage the PTo slowly and not all the way back to the end it will free wheel instead of braking. Once it has slowed you can move it the rest of the way forwad and the brake will stop it. Almost as handy as an overide clutch. Food for thought...............Happy...

Got a chance to p-u a 4600,pwr revsr,and 460 ldr,4wd, has 1100 hrs,nice shape,$17,000- good price ? good tractor ? how about some discussion on this model. Thanks

Looking for options on filters, where is the wix lisitng? do they offer for theTC models? The factory should make them available on-line.................save me from a trip to the dealer where I am likely to be scalped

Wondering if anyone with the Boomers has experienced a delay while emptying the bucket. It seems that it only happens when I tip the bucket to empty and only near the end of the cycle. It hesitates a bit then finishes the dump. It acts perfectly otherwise-anybody else ?might just be normal.

Anybody use weight in the bucket of there FE loader prior to removal? we used to put a few hundred pounds in first then it would stay put and be easy to get back on, I have not have the loader off the tractor but am thinking about running the mower w\o the loader on our tc35. Is it as easy as...

Well I am sure glad that this is over, All I have read is how bad you need your own baord. Waa, Waa, Waa,Well here it is and I expect to see alot of good articles here, come on- Really,just kidding all the Mahindra owners-we are currently lookingat the larger 2wd and they are impressive-Lloyd

Seems like we all share the same excitement and satisfaction when we get our tractors(new and used) just seems like we dont get enough seat time, maybe we could find a way to get the dealer to throw in some xtra "seat time" at time of delivery,that way if it is raining,or whatever we can have...

Wondering about weight distribution and sway control, do they really help? pulling a 24 ft 3500lb trailer w 1995 Ford f 150 4wd v8 a\t. Any opinions out there also, where do I order from if I decide to purchase? Thanks

sure would like to find a place in or near CT where I could get a new or slightly used 5ft bush mower, any ideas ? light service will do just fine,grass for the most part. thanks-LLoyd

Got a survey recently and completed it,ret'd to N.H. and they called about my comments.I must have said something as I was frustrated and not happy.When I bought the tractor had 50 hrs on it and I was told new filters and fluids(not done)when asked about it dealer said just buy the filters and...

ANyone had any experience with the 1050 model? If so what is your take on this tractor,thanks again-Lloyd

Who out there is the proud owner of the DK45 ? am looking at one and wondering how you like it,The loader capabilities and anything you can say about it,Your input is appreciated-Thanks and I look forward to some good reading, Lloyd Sales Inquiries are welcome to my email address-Thanks

I would like to find a new place to buy oil,fuel, and air filters for the TC tractors. Bought 2 this week and they were $12 each for the oil, that seems excessive. Anybody doing any better than that ?

We are looking at a real nice 2120 4wd w-ldr,ag tires,148 hrs,Whats the word on this model? we had one as a loaner a few years back and really like it-any experience out there as to there worth and there strengths ? look forward to some good feedback-thanks, Lloyd

Well everyone must have there tractors in use and be happy,No real action on the New Holland board these days.Looks like we are headed for some cold temps here in the Norteast,sure hate to burn more oil.Dont know about the rest of you, but we have gone thru some wood also. Have a nice day...

Well: we put a new t-sat and gasket in the TC and it still makes no heat. Also put a mechanical temp ga on it to view the actual operating temps, anybody had any luck getting theres to warm-up,ran it for several hours and never got above 130 degrees,thats with the radiator coverd completly !! I...

Has anyone had this fixed to the point that it no longer fogs? I read in the JD column that JD has a treatment thta tempers the dash plastic so it no longer fogs-New Holland replaced ours and it continues to fog-up.wondering if you share the same problem-Lloyd

Anybody replaced or added a temp ga to there TC 35 or bigger ? Deluxe or standard model. I'm told it is a no-no? how can that be, it must warrant some discussion. Thanks, Lloyd

Well there must be more than one happy owner out there today(me),board is very quiet-wouldn't it be fun if we could all just take a day,heck a few hours and go out and just enjoy-weekend is almost here, l at least for me and I cna hardly wait to get to work,looks like they are forecasting some...

WHat success have you folks had in getting this too heat up to temp. after 1\2 hr running the mower still very cool to the touch-Tractor has no temp gauge and seems to only heat up with cardboard in front of radiator-any ideas,has anyone installed a gauge ? thanks for the input-

Does anyone remember where the post is that talks about the coolant leak as well as the related "slow to heat up"post on the TC seires? I was reading it last week and cant seen to find it. Thanks-Lloyd

hit the wrong key- I am not going too get a response on the 34d unil they make one!! SORRY

Who has some input on this fine tractor, Have been trying one out and like it-has 16la loader on it-any pros and cons would be appreciated-3rd tractor in on my 50 acre farm.we do alot of brush hog mowing-Thanks from CT !!

I am looking for some feedback on the 1070 model.I am looking at one to purchase and wondering what you think. It only has 270 hrs on it,4cyl diesel,seems like a nice tractor.