Search results

B7610 with 400 hrs.It usually starts pretty easy when cold.You can run it for 5 min. or more and cut it off.It will have to go through a complete cool down before it will restart.Important ---When it does start its a split second after you release the key.Hardly ever will start while...

Any good places to buy Tractor parts.Like Rockauto is to cars and trucks?

Got a 2006 B7610 with under 400 hrs.on clock.When cold it starts pretty good after 3-4 sec.on the glow plugs.After you run it awhile it will have to sit a good while before it will start.When you turn off engine you don't hear the click after a few seconds.I can't remember what the click sound...

Does A b7619 hst TRANSMISSION have fan cooler?If so where is it,I can't find the fan nor have I ever heard it come on? Thanks, tony

Got my first small problem with 2006 B7610 200 hours.After getting it up temp 30 min or so.Like if my phone rings and I cut the engine off it wont start say after 5 min being off.It has to sit and cool down for 30 or so min.Also I've noticed I don't hear the click sound after you turn engine...

Bought a 2005 at auction sat.Its got 318 hours and seems to be in great shape.So far the only things I've found wrong are the temp guage isn't working and the fan at the radiator hasn't come on.I've checked the fuse,its good.Any help before I haul it to the dealer? Thanks, tony

I've done a search on this but still confused on the order(part) #.I'm wanting to order 'GATOR' brand that will fit my RCK60-24B 60" MMM.I think the 'GATOR' # is 96-787,can any one verify?? Thanks, tony

I am doing my first service.The stealer did the 50.The manual as you know isn't too clear on the Hyd.trans and Hyd.part of the service.I know from doing a search there are four drain plugs.Are they easy to find and tell they are a drain plug?Where is the strainer located at? Thanks in advance...

Can any of you good folks point me in the right direction of finding the capacity of my bucket?It is a 302 loader on a B-7610 tractor.I'm sure there is a chart somewhere.I have a small nursery and want to sell compost,so this will mean $$$. thanks, tony

I was greasing my B7610 tractor the manual only shows 3 fittings.I thought they would be a lot more than that? thanks, tony

I bought a used B-7610 with mmm rck60-24b .I've never been able to get the side to side adjusted correctly.If I understand the manual you should turn the connecting rods to do this adjustment?I wanted to check here before I started turning things.Right now the left side is about 3/4 of a inch...

I've got a B-7610 with a RCK-60 mower.How do you know when the spindles are full of grease>I don't want to bust a seal. Also are the wheels suppose to touch the ground when you mow. Thanks. tony3542

Where is the best place to get forks for a L302 loader,the kind you screw on. thanks, tony

I have a small nursery that I need to advertise sells from time to time.That being said ,I have a 4'x8' flashing sign.I 've been loading this sign(heavy) on a small trailor to move it to the road when I have a sell.I was thinking there has got to be a way to have away to use my 3 point hitch to...

On my b7610 with 58hrs 3 point hitch has rapid leak down.I now have a 350-400 lb. aerator mounted on it and it will go down about 1/2 inch per min.And of course the mower does the same thing.Is there any kind of adjustment for this.The lever is in the middle position,not up or down. Had this...

I noticed today while using the loader on theb7610 the seal ,O-ring had came off the end of cylinder.Can it be pressed back in to the cylinder?I don't want to tear it up or damage anything,also hate to have to run it to a dealer for something simple. Thanks tony3542

I'm going to be doing my 50 service.Is there 3 or 4 drains on the HST?Itried to do a search but couldn't find the answer,I know I've read here the manual is wrong.Thanks for your help and this great board for a newbe. tony 3542

When checking my rear tires unscrewed cap ,valve core came off with cap,fluid shot out about 10-12 ft.I was lucky it missed my face and eyes,should have been wearing safety goggles. I've still got to check my air.Thought about stopping tire at top center jacking it up to take pressure off and...

Does anybody know a honest tractor equipment hauler in the middle Tennessee area?Need someone ASAP.Any where I do A search on this.? Thanks tony3542

Can sometell me the horsepower on theKe-3. Thanks tony3542

I haven't paid much attension to tractors in the passed ten years or so.But now I find myself needing a small tractor (25-35 horse)with a loader.The choices are now mind bogling.I've been checking all the tractor webb sites for help,this one sees to be the best.N-H,kobota,J-D are out too much...

Won\'t start I have a 1987 244 21h.p. 3 cyl.international(Mitshubitsu)with 600+ hours.I went to start it today ,won't start.It's not the battery,new battery ,cables and connectors.When you turn starter switch sometimes the panel(idiot)lights will come on sometimes they wont.I can hear the...