Search results

I have seen the female spade terminal melt the plastic housing and not make contact with he glow plug connection, so I would change the female spade connector, put a ring terminal in is place and install under the nut on the glow plug with the male spade terminal

Pull the fuse or wiggle the fuse for the ECM it is in the harness near the computer. I have seen the terminal loose their tension and make intermintent contact with the fuse. If that helps replace(splice in ) the fuse holder with a good quality one

It is more than likely chattering due to low voltage, check voltage at the relay, check the positive battery cable and if i remember correctly there is a connection off the positive cable to some smaller wires, look for dirty connection there.

We can sell you just the cables, $229.75 each plus freight. If your interested give me a call, 203-393-0642

Check for a mouse nest in the transmission/bell housing, causing the clutch to slip. I have seen a few. The clutch slips and the input shaft to the HST stops turning.

Leo, As we discussed on the phone yesterday, we had the part number in stock and it shipped this morning. I checked on the part # being discontinued with Mahindra and was told it was an IT issue with the catalog system and will be fixed this week. If I can be any other help give me a call...

Here is the blow up of the 4550B valve, it is available on our website www.NewEnglandTractor.com

Jimmy, The glow plugs that come in the Mahindra update kit are correct, yes they are a little larger than the old ones. What happens is usually a little carbon/soot gets built up around the holes and you just need to clean the holes.

Why not get the OEM Mahindra one? They show it instock.

Check your quick couplers, one could be disconnected or defective

Yes, thank you! My bad

We have all the parts diagrams on our website and will ship them to you if needed. www.NewEnglandTractor.com

We built a 2555 hst the end of this winter with a front mount blower, driven off rear pto with a shaft to the front. Was a nice unit.

We were honored to be asked to supply tractors and a mPact XTV for tomorrows interview Mahindra USA VP Cleo Franklin on FOX Business News with Stuart Varney at 12:45 PM EST Mahindra hope you can check it out. They are all prepped, loaded and on the way: eMax 25 TLBM, 1533 HST loader and one...

A few pics of the Mahindra mPacts now that the roll cages are assembled and roof, windshield, back pannel and mirror kit installed.

Just got in our first shippment of the all new Mahindra mPact's. Have to say the construction is amazing and they are made in USA. Now its time to start putting the roll cages together. Feel free to stop in and check them out and take a test drive. Pics to follow.

Here is the link to the NEW Mahindra MAX Series, only a few days away to the release. Mahindra Max www.NewEnglandTractor.com

Came across this today, anyone else seen this a Mahindra comercial TLB , think it will make it here some day? : Mahindra EarthMaster | The Next Generation Backhoe Loader

We are offering free ground shipping on Mahindra Parts orders of $100.00 * or more to TBN members * some exclusions apply such as truck freight items, over size packages, over weight etc. But will offer discounts on those orders. Most parts will ship the same or next day. Please check out our...

We are offering free ground shipping on Mahindra Parts orders of $100.00 * or more to TBN members * some exclusions apply such as truck freight items, over size packages, over weight etc. But will offer discounts on those orders. Most parts will ship the same or next day. Please check out our...

Just wanted to let you all know that have ordered Mahindra parts from us in the past that our new online parts ordering has been updated and funtional again as we had problems with the shoping cart program, we are now with a new server. You can access us at: Mahindrapartsonline.com or through...

Thought some of you Mahindra fans who like nascar might be interested in this link: Mahindra USA Racing It has some info on the Mahindra race team

Here's a few pics of the 2015 with 2710 subframe mounted hoe. 7'10" digging depth, very nice and powerfull unit. Tried it a little, before delivering the first one, very impressive.

Mahindra has just released the "15" series, 2015(20 hp), 2615(26hp) both hydro's, mid mount pto, mower, loaders. Similar in sizes to the B7500 and B7800 Kubota and the John Deere 4110 and 4115. Come take a look at them at the Orange Fair This weekend Sept 20, 21, 2003. We will have both models...

Mahindra has just released the "15" series, 2015(20 hp), 2615(26hp) both hydro's, mid mount pto, mower, loaders. Similar in sizes to the B7500 and B7800 Kubota and the John Deere 4110 and 4115. Come take a look at them at the Orange Fair This weekend Sept 20, 21, 2003. We will have both models...

Anyone with info on a mf1020 2wd? - Looking at this little tractor, 682 hours, hydraulic dozer blade on front and tire chains, been garaged untill about a year ago, sheet metal is great on the hood, frenders have some rust and 1 is dented a little, runs good tires are good. It has a 3 spd trans...

Well its not a 1410 the guy looked again, found out what it really is today, its a ford 1110, the guy was close i wonder why NewHoland dealer coundn't find it either. Its 4wd, hardy loader, no power steering, he says the backhoe is a kubota? but i take that with a grain of salt. New turffs, rear...

I have a guy thats looking to sell a ford 1410 4wd with a loader, with 3 pt (no name) backhoe, claims its around an 1986 model year. I cannot find any info on this tractor model any where, he said he checked with the dealer and they could not find info either, says its a 2 cylinder. I have not...