Search results

I use my tractor for moving boats and material handling and don't use full load on engine unless using for grading or snow removal. When engine was ready for regen I had to manually go into regen. A learning experience is all I can say...

Ok, had to pull manual out as not knowing what to expect... got through the first one... thinking another 2 times I should have it figured out lol. Now knowing what to expect I think things will go more smoothly in future. Once in regen it took about 10 minutes to complete. Apps 25 hrs for...

Got the funky cat 1/2 ram from the agristore, thinking 275.00 and the lines from tractor supply and thinking 45ish dollars. Not too many suppliers with the cat 1/2 for the larger L series. Have a grader blade, box blade, rake, hitch, and snowblower to use and the hydraulic top link will save a...

I had room for one more, but what I use the tractor for 2 is fine. I don't see using more than 2 in the future... if things change I can always use a relay switching system to add more remotes.

The wire tied to the cylinder is for giving power to trailers to release brakes for back up. We move a lot of trailers and many of them the brakes lock up in reverse if you don't have power to release them

Pretty easy install, waiting for the ram to get back in stock was rhe hard part lol. I am happy with a clean installation! 5460 tractor by the way...

Don't know how this got the passed inspection... latch on one side extremely hard to engage. The stand off for the handle was welded at a downward angle pushing the latch mechanism into the plate when trying to engage. Working on getting the pinned on frame replaced via warranty. Have to say...

Montague here... are you working with Pells?

Seen many pics of rusty hose clamp on loader control. Geese seems like they could come up with something better. Mile long hose clamp with steel screw. Replaced mine with all ss clamp. SAE 06 9/16, 3/8-7/8 and fits perfectly!

I have a hard time believing it is weaker, Id say its how they measure/rate the capacity. Just curious where are you located? Near detroit or north of muskegon? I was originally looking for a 6060 not too long ago and the dealer told me there was not one in the state. I settled for a 5460 that...

just reread your original post, I believe you were talking about 3rd valve in rear not a 3rd up front... anyway nice rig!

Congrats! you will get used to how it responds, actually I like a quicker response. Looks like you are still waiting on the 3rd function... Nice rig, its a beast! Have fun with it!

Here are a couple pics... the tractor feels a lot bigger than my 3240. Its going to be a big change for you from a b series.

Finished up the wiring... led lights, led amber flashing caution lights, and trailer harness to release electric trailer brakes. All working as wanted. Used misc relays i had laying around, ran 12 gage wire and fused at battery to posts under plastic panel to run fused circuits from. Plan on...

Good news, got my 5460 Wednesday

Congrats on the new ride! I pulled the trigger on a new ride as well! 🥂

Got a good start on some led lights, going to take a little time to get it wired in with relays with marine rocker switches

Purchased beginning of January off the lot, added canopy, 3rd, rear valves, and turfs. 2 months later after dealing with back orders its here! Surprised in how much bigger it feels than my L3240, suppose I need to get used to it lol. The L3240 I sold well before the new tractor showed up. Glad...

Well after sitting in Memphis for 8 days the parts finally arrived. After taking it apart it looks the same as otherside when the bearing failed. Both times it was the outer bearing. Came apart pretty easy, bearings came out really easy. The seal on spindle I used channel locks to remove it...

OK, in the shop now... for the 84in bucket inside dimensions 38" bottom and back of bucket is 24". I use this with a 724 loader and a full bucket of wet snow has some heft, I dont think I would want to have a larger bucket. I do have loaded rears but no 3pt ballast. With the 84" bucket it also...

front left from 2018

Have a L3240, a couple years ago front left wheel bearing seal was leaking. After taking it apart to replace seal found bearing came apart causing the leak. About 100.00 in parts got it back together and topped off with fluid. Yesterday after snow removal I parked the tractor in shop and noticed...

My lawn tractor is about 10 years old and in excellent shape. This year the stand offs where the hood is bolted on all four either c racked or broken off. I imagine from the age of the plastic. Went online to buy a new hood... dang, they quit making them. Ended up buying a used one on ebay for a...

Looking for a L6060 Rops a couple months ago and found out that there was not one in the state. After some searching I did find a 5460 rops locally on the lot but looked like older stock. I decided to buy it anyways as dealer said he did not know when he could get new stock and could take 6...

My 2010 L3240 with Land Pride SB 1574 snow blower... https://www.youtube.com/watch?v=0nLHN7x0qPo

Ok, this fall noticed it cranked longer than normal before starting... now that its cold it takes a lot more cranking before it fires. The glow plug light turns on... but thought to check power at the plugs. Found no power getting to the plugs. Thinking maybe relay? Got a parts breakdown from...

Just curious what setting do you use to cut your lawn? Today was actually the first day I got to cut with it and tried the #3 setting and I think that is pretty short. Im thinking the #4 or maybe better the #5 setting... by the way it cuts great! and about 1/2 the time faster compared to my last...

Well I just joined the 2500 club... a 2550 will be delivered on monday. Been looking for a while and I do think the cc you get the biggest bang for the buck and you are not buying a name. Will get some pics when its delivered. Checked all the local places that sold cc and found only one that...

I found a need for mirrors in moving boats in and out of my service shop, for the larger boats it was just too hard to tell where you were going. This is what I came up with... 6' 2" to the bottom of the mirrors, at least I wont be conking my head on em lol. They are very adjustable and can be...

Now I am a proud owner of a box blade and have never used one... time for a stiff learning curve. I relize I will need to just use it to figure out the best setup for my uses, the question is... The box blade that I aquired has the hinged door in back... what are the pros and cons of the hinge...

Just purchased a 6ft bb, 6ft rb, and a 7ft rake for 1050.00. Will be picking up tomorrow morning. Slightly used... think I did ok?

Got a sweet deal on a 30ft boom truck!!! A customer of mine saw that I was using a local tow truck to have an engine pulled out of a large boat; after the truck driver left and the engine was on the ground he told me he had a great deal for me. He told me he had a truck he would give to me real...

Recently purchased a tractor for moving boats around the lot and landscaping/snow removal. I have aquired a 3 pt reese type hitch for the rear, but considering building a bolt on reese type hitch for the front; where it would attach to the front frame of the tractor. The reason for the front...