Search results

I have a much used LT-166 with the 48"deck. The poor thing gets a LOT of use for mowing and currently it refuses to go up a hill. Going back over the posts it appears the tranny is fairly weak and they are expensive to service. My question...Is this worth fixing or is this simply a weak design...

DUMB question I know...tried the worthless SEARCH feature...NO joy there. New Blades...60" mmm...mount the new blade with the part numbers UP? Meaning UP when the mower is on the ground, mounted on the tractor. The manual doesn't show the orientation well at all. Looks opposite of how I...

I was just mowing and my 2620 died. Threw the PTO into neutral, turned the key to restart and zero...not even dash lights. Checked the seat/kill switch and wires...looked fine. Cycle the key, remove key...doesn't matter...no nothing when the key is turned. Nothing under the hood appears...

The clutch on my new 2620 has started to simply NOT work upon start up. I'll pull the tractor out...then go to engage the rear PTO and ....no clutch. The pedal pressure is also higher than when the clutch works regularly. I've checked all the linkage, as well as the hyd fluids. All OK. Today...

I've got a new Kubota B2620 with a WOODS 5' rotary mower and a FEL for wt in frt. I mow in 4x4 and as I'm fairly new to the tractor thing...I'm VERY careful.....probably over cautious...hence the question. I've got several mildly hilly area where the buckbrush (2' tall easy to chop up bushes)...

I learned the hard way today WHY one should remove the MMM on their B series when driving in rocky, or rough terrain. I was up on my hilly area and somehow despite being in L range ran into a rock hidden in the grass and bent the rt side of the mower pretty badly. Hit the rock with the right...

disregard

On a current production 60" MMM the bolts that secure the blades appear to be 1 1/8". Converting 1.125" to millemeters yields 28.58mm . So are they 1 1/8" or 29mm?? FN in MT

I've had the thought that mounting a small 2.5# dry chemical extinguisher on the B2620 might be a good idea. It gets VERY dry out here and any sort of a fire could not only destroy the tractor but could start a wildfire that could easily turn into a real mess. Anyone else have one mounted on...

I've got some hilly areas I'd like to mow, with both the MMM and the bushhog. With safety my prime concern I've thought of buying a TiltMeter. How MUCH "tilt" is allowed before your in trouble?? I know there are many other factors but on dry terrain, whats the guideline?? FN in MT

Gentlemen, Just wanted to Thank all of you for the input when I was researching my BX buy. I took your comments , weighed my options and ended up with a B series instead. My 2620 showed up yesterday and was quickly put to work pulling up a bunch of old fenceposts. Also did some mowing...

Gentlemen, I've NEVER pulled up posts with a FEL and have about forty to do. They are all old wood posts, 12-14" diam that were sunk 2 1/2-3 feet. Pulled a few tonight but being new to this I was pretty cautious. I raised the bucket and at 3-4 foot up the post I slowly pushed them back and...

I know ALL of us wish for a bigger tool...but with my wrenches up to a mere 7/8" and 1/2" sockets to a mere 1". I may be lacking in the tool Department. With a B2620 on the way.......And doing my own maintenance a fact of life. Other than a Service Manual, some specific fluids and OEM...

After hours of pouring over manuals.......sitting on both models......concerted souls searching........and seeing a new B2620 in the crate at the Dealers.....I opted for the B model. B2620HSD with block heater and rim guard included. R4 Industrial tires 3 frt suitcase weights...55# 60" Kubota...

I've got 1.5 to 2 acres of lawn to mow. I also mow several acres of rock free, smooth fields surrounding the house once or twice a year. I've got 25+ acres of rolling ground, half covered with cactus,yuccas and buckbrush. I'd like to get a bush hog so I can mow it regularly to get rid of...