Search results

Hey TinHack, Thank you for the information. I see that looks like a possible good spot to mount them on the Kioti bucket. Glad it is working out for you.

Hey Rick, I know this thread is older. The hooks look great. I want to order some of the hooks to ship to my dad that just bought a CK2610SE cab model. Does your bucket have the space between the top of the bucket and the support structure welded in? If so did you just run longer bolts...

Hi Leonz, All great info and I will definitely follow your advice. The new land does have some fairly steep slopes along the road and ditches so I will be loading the tires for ballast. I spoke to the dealer today, about the Maschio Birba, and unfortunately they sold it so they will pulling...

Hi leonz, Thank you for your thoughts on the Birba and I really appreciate all your knowledge shared on this site. I was hoping to hear it may be a good mower for the money to at least get going with for now. As you said I can use it for a while and then upgrade down the road if needed. Just...

Sounds good and thank you. Good to hear that the Birba may be a decent fit for the B26. I'll keep reading a little and searching for the other brands that you mentioned. I'll also probably contact the dealer to find out more about the Birba. I'll keep you guys posted on what I do and good luck...

Hey CVF, Thanks so much for all that great info. You confirmed what my thoughts had been. I keep seeing it listed but have not contacted the seller due to thinking it is too heavy and HP hungry. I contacted Woodmaxx about a week ago and they had two of the WoodMaxx FM-62H left. I thought on it...

I haven't been around in quite a while and sorry for the long post. So I recently bought a Kubota B26TLB that has a claimed 19.5 HP at the PTO. I am in the process of buying 20 acres that is mostly wooded but has some areas that were previously cleared/ mowed and need to be mowed again now so we...

Hi Rswyan, Thanks for all that great info. Sounds like another happy B2910 owner. To be honest I never know this particular model existed. After looking at it I really like this model. Just going to have to check it out better and make a decision. I definitely will take some coolant and my...

Hey Guys, I posted a thread about B21 advice. Lots of good advice was given. I did not realize some of the newer Kubota B's, before the new 2650/ 3350, had position control on the 3 pt hitch. /Pine informed me they did. I got looking around and found a decent looking B2910 locally. I like all...

Hey Guys, I keep watching used B21's thinking one would be nice for my small 2.25 acres here in Texas. I have looked at a few in the $11,000 to $13,000 range and are pretty beat up. There is a really clean low hour (94 hrs) at a dealer I have been watching for a while. It started at $19,850 and...

This is as much as I can find for now. Finally found in the parts catalog more info. Still not sure what is included in the kit, but I think it has everything that is needed.

Hi, My father is looking for a JD 47 Snow Blower for his x595. I found a used one on CL for him that was on a x475. He is trying to find out what he would need to purchase to get this blower to work on his x595. From looking at JD's website it looks like the blower, quick hitch, implement drive...

Here are the pages I think you are looking for. Hope it helps. Let me know if you need anything else. Also, don't know if you already have one of these things, but they are a huge help. You can buy them right at the JD dealer and many other places. Posted the first link that popped up...

Thought I would post this for you F lovers. Noticed it while looking at Kubota's on CL and thought someone may be interested. Ennis is just a little south of Dallas. Kubota F3060 Mower

Hi Monkeys Tractor, I have not owned both products, but I could offer up a little of my perspective. My next door neighbor and brother in law, was my father in laws originally, both have Scag Tiger Cats and really like them. I think the Scag gives a slightly better cut than my Kubota ZD323 and...

Looks like the Kubota part # is K3181-85112. http://kpad2.kubota.co.jp/kpad2/PartsInfo.do?bookCd=100A0452&funcCd=&figNo=&himban=&dispType=0 Kubota Tractor Corporation - Parts List $338.64 at Messicks http://www.messicks.com/partsearch.aspx?pn=k3181-85112&ven=All $320.11 at Keller Keller...

Hi Stumpjumper, Congratulations!!! Great looking tractor. I have a similar but smaller bucket on my L3800 and I agree with what the others have said for placement. I put three hooks on. Two inline with the loader arms and one centered. Thought for a while whether I needed some support for the...

Hi Ronster, No problem on the pictures. Glad I could help. I am not sure if this is what you were asking for. If not, let me know.

I can't figure out my camera issue. Here are a few pic's in focus from my phone. Have you checked out online with Lashley, Keller, or Messicks just to compare prices?

You are correct, the pin looks to be right at an inch, or just under. Total length looks to be 16.5" from center of the pin to the tip. Can't figure out what is wrong with my cheapo camera. It focuses and then goes out of focus when I snap the picture. I will keep messing with it and repost...

Looks to be exactly 6 inches. Maybe just a hair over 6 if anything, probably due to the thickness of the powder coating. First picture is deceiving due to the angle I snapped it. Let me know if you need anymore info. Take care, Russ

Nice THUMB :thumbsup: I do not think the bucket control has a cushion valve on it, if I referring to it correctly, but I had a problem a couple of times with my BH77. My problem was the boom would not hold a fairly light load up and would drift down like your bucket. I tried lifting the rear of...

Hi Roger, That "commercial" moniker is a tough thing for me. I would say it is well built and should last me a lifetime, but I do not think I would call it commercial. I guess I think of commercial as something that would hold up to a lawn service crew using and abusing it. Not sure if it would...

Just thought I would post these pictures and get the expert opinions from everyone on this box blade. Stumbled across it at a local dealer. It measures 67" wide. Appears to be quite heavy. I would guess 800-900 + lbs., but just a guess. Cannot seem to find any info on Servis on the internet. I...

Well I had a chance this morning to check on my BH77. I first checked the tractor pressure relief. Was at 2300 PSI. This is not the problem. The BH boom would not even budge the tractor. With the bucket on the ground and curl the bucket out, the boom cylinder would just be pushed back in. Not...

krzbwags, I see what you are saying about the Allied loader. You can always mock it up where it is at and run it through it's travel and see if you are happy. You are the only one that needs to be happy with the finished product. Depending on how much work you are up for, I think there are a...

dntfxr, The 175 loader in LA looks pretty nice in the pictures. Like you said, a little faded, but the bucket looks straight and overall it appears in really nice shape. The 522 sounds like a great deal. Might be worth calling the dealer on that and see what it includes. If it does not have the...

Zebrafive, The 175 was the first picture. It did not show much of the loader, just the valve and joystick JD was using. I agree the 175 loader would be a good match as long as the look is appealing to dntfxr. Here are a few pictures of the 175 I had around. I think the 175 still needs 4 bolts...

Wow!!! That is a great looking 2040. I like the sunshade. That is all the cab a tractor really needs, right??? Sounds like you did pretty well buying it. I think that series of JD's were one of the nicest they built. Sure are heavy duty and will likely last forever. Here are a few 520 loader...

Well, I have been hanging around the Kubota forum for a little while. I am a John Deere guy, but the JD dealers I have tried in Texas sure are not what I am used to in Western New York. Still waiting to get quotes they promised me??? Anyways I now have two Kubotas and just one nice green push...

Hey Guys, I am about to build a new bucket for my old John Deere with a Case Model 60 loader on it. I would like to use the skid steer quik attach style brackets. I see ATI and Bradco make the attachment plate for the bucket or other attachments. I was wondering if anyone makes the...

I seemed to have lost my earlier post. My father is thinking about selling his JD332 Diesel lawn mower with a 46 inch deck. The tractor has the dual hydraulic controls and power steering, but no 3 point hitch. It is in excellent condition. It is always kept indoors, washed, waxed, and serviced...

My father is thinking about selling his 332 Diesel lawn mower with a 46 inch deck. It has dual hydraulics and power steering, but no 3 pt hitch. The tractor is in excellent condition. It is always kept indoors, washed, waxed, and serviced. Does anyone know what the ballpark price he should ask...

Does any one out there have any thoughts about putting a JD521 or JD541 Loader on a 301A (which is the industrial version of the 1020). John Deere sells mounting brackets for this loader to put them on the older series tractors (20 series). Thanks for any input anyone has.