Search results

I’m running the Bush Hog RTC50G tiller on a B3200. It requires 15 PTP hp, and my B3200 has 23. It’s gear drive, made in Alabama and has a Chinese gear box. I’ve used it for 4 seasons and have no complaints. You have to be realistic with what you can do when breaking up grass/clay. I started by...

I ended up piping the rear remotes in permanently, after the WR Long 3rd function and using the power beyond capabilities of the summit rear remote valve to have a dedicated power beyond circuit for the backhoe or anything else I need it for, while still having functioning rear remotes.

I have a B3200 with a power beyond port installed for a backhoe. I recently had a WR Long 3rd Function installed by my dealer. Now I’m adding (on my own) a two spool manual control valve for rear remotes. I have the piping laid out and just want to make sure there is no problem with my design...

The tractor’s rear PTO output spline (and connected PTO shaft to tiller) stop turning, and the tractor‘s forward motion stops. Rear PTO engagement is accomplished by depressing the clutch and moving a lever. Tiller PTO shaft turns easily when not connected. Tiller and PTO shaft are new, with no...

I have a well maintained B3200 with 300 hours on it. It has hydrostatic drive with three ranges. I recently added a 50 inch Bush Hog tiller that has a PTO shaft with a slip clutch. I made sure to slip the PTO shaft clutch by following the directions to loosen the bolts, turn it on and make sure...

I always blow out my radiator and condenser with a radiator genie after I mow or brush hog. If I’m out all day and it’s hot, I’ll blow them out on my break. When the condenser starts to clog, the cab warms up fast. The reflectix on the underside of the roof helps keep the recirculated air cool...

Thanks for the tip. When I took mine off I noticed they were not that tight, just snugged up.

Thank you. Pretty much what I’m doing.

My L6060 has an in-line valve on the heater hose that goes to the heater core in the roof. When I set the cool-heat blend knob to the coolest setting, a servo closes that valve and I don’t really feel any hot water running through the heater core hoses. If the insulation and tint don’t improve...

It puts out 60 degree air early in the day, but after 6 or 8 hours in the South Carolina sun, it can’t offset the heat coming through the cab glass and the air ducts in the plastic roof are heating the cool air output to the cab. It works great on hot overcast days. It’s all day in the sun where...

I have a 2019 L6060HSTC and on hot summer days my AC struggles to keep the cab cool. I regularly blow out and wash the radiator and condenser fins and make sure my cabin external air filter and internal air filters are clean. I plan on tinting my windows eventually, but right now I have the roof...

LD1: Thank you very much, that was helpful. I think I have a clear understanding of the lines now. I just have to identify the Tank Return line to tee in the tank return on the new valve. When I looked through the install manual for the Summit Hydraulics EVK2-3 valve it only shows 2 connections...

Thanks for the photo. I was thinking of doing something similar with the Summit Hydraulics electric valve kit. I’m thinking of installing their 3 spool valve, and using two of the spools for the rear remote top and tilt, and use the third spool for my 3rd function, by running a pair of hoses up...

Thank you. Your picture is helpful.

thank you.

My FEL has 4 hoses. I would prefer a true 3rd function, but understand that a diverted may be the easiest way to go. I’m just trying to figure out what I can do with the backhoe’s power beyond port that is usually just looped when the backhoe is not installed. I think (but I’m not positive) my...

I have a B3200 that has a BH-76 backhoe sub-frame and rear power beyond ports for the backhoe installed. The backhoe is not normally installed on the tractor, and I want to add 2 rear remotes for use with 3 point implements. Since the backhoe and 3 point implements can’t be installed at the same...

I purchased a used RCK60-27ba mower deck for my 2009 B3200HST. The deck came with all the brackets and hangers, but no installation manual. My tractor also has a backhoe subframe installed. Does anyone know where I can get an installation manual for this deck? Does it require drilling the...

I have an L6060 HSTC as well, and I also struggle to see connecting skid steer attachments. I’m curious about the camera you installed to help make the connections. Anything you can share?

I have a 2019 L6060 HSTC Grand with a OEM (Grammer) air ride seat. I understand that this factory option technically disables the stationary PTO function. You cannot tilt the air ride seat up to operate the PTO in stationary mode, and Kubota offers no official solution. I also know that if I...

I'm looking for some input from owners/users of a John Deere 4052R. I need to upgrade my smaller JD Garden tractors and a Kubota 2320 CUT to a cab tractor to brush cut 25 acres, handle a grapple for down trees/brush removal and normal bucket/pallet fork work. The cab is essential in my...

Hello All: I have a 1989 318 (serial #600XXX) with an Onan P218G engine and about 400 hours on it. I was mowing the lawn, machine was running fine, and it stalled. When I went to restart it, it had to choked, and then it would only run if it is 3/4 choked, and had very little power. It has fresh...

I'm looking for information from 3X20 Cab with Backhoe owners. I am interested in a JD 3520 Cab with the 375 Backhoe, and I would like to know if there is any access to the Backhoe controls from inside the cab? I understand that the Backhoe is normally operated from the rear seat on the Backhoe...

Hello All: I have a 1989 John Deere 318 with an Onan P218G engine and a John Deere AM107421 voltage boost relay installed. The tractor has been starting fine for years. Today when I turned the key, nothing. No starter response at all. Have geed battery voltage, even tried a booster, no...

I have B3200 that I use with a FEL and Backhoe installed. Sometimes I have the need to attach a tow strap to drag a log out of the woods. The BH76 Backhoe blocks access to the drawbar, so I need to attach a nylon tow strap somewhere on the backhoe. The attached image shows where I think I can...