3 point lift

My hydraulics need rebuilding, it struggles to lift even moderate loads and bleeds down quickly when I shut the tractor off. But when these are rebuilt, are they capable of lifting a 60" brush hog, 72" finish mower? What about a 60" blade? I'm just trying to decide if it's worth rebuilding it...

Hi! I have an old Ford 1700. Recently, the control arm for the 3pt lift has been "slipping" up. Messing around with it, it goes down with resistance, but when I pull on it, it moves pretty easily, which means if you hit a bump, it will lift the 3pt arms, which makes grading really annoying...

I have a diesel Massey Ferguson 135 and I bought it with the hydraulics backwards, I don’t know if it was replaced by an inexperienced mechanic or what the story is, but up is down, and down is up, figured someone had hoses or something switched, I’d like to make it right, it came with no...

Does anyone know of a good site to cross reference website for hydraulic lift control valves? I'm looking to rebuild New Holland hydraulic lift/control valve part # MT40007577 (LS Part #40250285). I have been able to cross reference some parts on New Holland tractors but I haven't had any luck...

My B7200 three point lever has just started flopping down and will not hold it's position. This has a FEL on it and there have been times that the FEL wouldn't work until I messed with the 3 point lever. The FEL seems to be pretty weak too but that could be a whole other problem. What could...

I got a new holland Ts110 and the 3 point won’t go all the way down. I checked the draft every thing seems fine. It works fine just won’t go all the way down. When it’s down there is about two inches of the aux lift cylinder showing

I have a Ford/Newholland 1215 compact tractor that has a serious whine when raising the 3 point lift. It does raise so I know the pump is working and did notice the fluid reservoir was very low. My question is, could I have damaged the lift or pump running the pump with low fluid and if I drain...