culvert

Hi all, I'm installing a 30" HDPE culvert pipe. Nearby I have an existing 8" PVC runoff pipe that I'd like to tie into the 30". Should I use a T with Marmac wrap and use reducers. But without using reducers, any way I can cut a hole into the 30" pipe and stick the 8" pipe into it and use foam...

Due to some extreme rain with flooding I have some 16” culverts that need to be cleaned out. They are full of debris and a lot of fine sand a gravel. I tried the trick of pulling a tire through the culvert with limited success. The tire cleared the debris put little of the sand and gravel. From...

I've got six smaller culverts (10-12") and four larger ones (eyeballing them at 3-4ft) on my property. They are all clear, but I was thinking about putting some galvanized chain through them and anchoring it at both ends with some rebar. The idea being that if it gets jammed up, I can pull a...

DISCLAIMER: YES - I WILL TAKE AND POST SOME PICS LATER TODAY - Our lot is in a little dead-end valley, and the part that will be farmable once I clear it out - it has not been tended in 50+ years, and there are a good number of substantial trees that need to come down first. Up on the...