diverter

  1. X

    Diverter Valve Troubles

    Have installed on my Kubota B26 a Surplus Center 6gpm Dual Solenoid diverter valve to serve at the front auxiliary hydraulics to power a grapple. So I've found that the grapple will work with the AG hoses hooked together in one configuration but not the other. When I switch to the non working...
  2. R

    Diverter Valve Question

    I am adding a thumb to my bucket, planning to use a diverter valve with solenoid and trigger on joystick to activate. The plan is to connect it so the curl and close are in the same postiton on the loader valve (left) so I can trigger it between curl and thumb closing to secure a load, and...
  3. dinoedwards

    Branson diverter

    2021 Branson 2400H with push button on loader stick diverter valve. Leaking at fitting. Are these WR Long or factory from Branson? Looks like crush washers like brake lines? Or O rings are bad.
  4. P

    How should this diverter valve be plumbed?

    Massey 275, came with this old diverter valve on it. Right now I'm just trying to spin a bale wrapper. I ran lines as pictured below and so far I can only get the wrapper to spin one direction. I did some googling and this is what I found. "Lever back = oil pressure upper back port Lever center...
  5. chilly81

    PS works great, all other actuators very slow. Diverter good. Troubleshooting ideas? (JD750)

    I'm new to this with an old JD750. Trying to fix extremely slow actuators while the PS is working just fine. Pulled the diverter valve and it's clean and moves smoothly. Have the JD manual and it's excellent explaining the circuits, but it's new to me so want to ask if it sounds like I'm on...
Top