ferguson to-35

So I bought a 50 something (serial tag missing) to-35. I brought it home and noticed a radiator leak, so I replaced radiator, hoses and thermostat (tested thermostat). So I ran it yesterday for about 20 minutes or so to get it hot and check for leaks. I was very happy, not a drop anywhere...

Hello all, I thought I would share my PDF manuals for TO-35 tractors. These manuals for the American Ferguson's are difficult to find online in PDF form. Included are the Owner's Manual, Workshop Service Manual, and Illustrated Parts Catalog for parts lookup. The service manual also covers MF50...

Davis loader bucket repair on TO-35

I picked up this 1960 Ferguson TO-35 on Craigslist for $2500. Needs some love. I'm working on a full restoration on it. I'll post pictures as I go.

Good morning, I'm a new member and this is my first post. I have just acquired a Ferguson TO-35 (not running) that needs an engine rebuild. I would like to work on it but the MF 99 loader on the front is in the way of everything that I would like to do. I have some experience with tractors...

seems to be stuck in second gear . any thoughts to assist would be appreciated. cheers, scaredychicken

TO-35 standards with no glo plugs. I know these tractors are known for having issues starting but man this thing is breaking my will. Tossed a new battery in her and had the heater plugged in all night but she won't even bark. Took out the injectors and cleaned them all up as the previous...

I have a '55 To-35 I have had it for about 5 years and received it from the previous owner with a loop of wire that holds the shifter forward in Lo gear, If you don't slip this loop over the shifter it will pop from gear after a short while, which is really fun if your headed down a steep hill...

Traded for a '58 Ferguson TO-35 Deluxe and it was in rough shape and me being a cheapo i decided to build the lower grill section. I bought the grill used from a Massey dealer who parts out tractors but the bottom 2 bars were cut off so I decided to hide that. I formed the metal with a torch...

Hey there, does anyone know where I can find a wiring diagram for a TO-35 gas tractor? Thanks in advance for any information you can share.

I recently bought a 1959 Massey Ferguson TO-35. The previous owner used a bungee to hold down the door you open on the top of the hood to access the fuel cap. There's a hole that probably should have some sort of bolt or latch holding down what I call the fuel door. Does anyone own one of these...

Good Day Members Have just joined and am new to this forum. If I make a mistake please excuse me in advance. Just completed removing and rebuilding my hydraulic pump in my Massey Ferguson TO-35 (1957). Was first time for me and I am sure hoping it is the last. Anyway, have it all back...

Are Ferguson TO-35 good tractors? I have found a good looking little Ferguson. I will mainly need it for light work and hooking up a bush hog. Are parts hard to find? Thanks!

i have just recently bought a tractor that needs some work before restoring.....the line that comes off of the oil pressure gauge has rotted off and not sure where the other end goes in to.....i imagine it goes in the engine block or somewhere around the oil filter but cant seem to find a hole...

Hello, new member, wanting to know how to check & add trans/gear fluid to my Massey Ferguson TO-35. Can't find dip stick. Thank you Also can you send me other hints or info. On my make/model

I have a 1955 Ferguson TO-35 that is in need of a new or rebuilt steering box (manual steering). The sector gears are worn out and a couple of teeth are broken. Does anyone know where I might find a new or rebuilt steering box? I am also looking for a new front hood section.