fork

Hey folks, Just sharing a recent project I tackled — I picked up a Valpadana 6045 RS with a completely busted gearbox and non-functioning hydraulics. Turned out the gear selector fork had snapped clean off, and the only way to get in was to split the case. I put together a custom jig using...

Hello. Looking for fork/tine recommendations for a bucket build. Have an existing JD 4 in 1 bucket. It was actually pretty limited use, so using existing materials, we cut off the upper bucket, welded some box blade ripper shanks on top, and mounted a toothbar to make a debris grapple...

Hello, Only have about 45 hours of seat time with my global / euro attachment system on a 5m series tractor at this point. One thing I didn’t realize when I ordered it is how the bucket would swing freely when in the fully forward dump position. This really helps ensure all of the material is...

Hi, I am wondering what options I have for forks on my BX 25, What do you guys like? Dislike? Thanks

I have a 2-prong bale fork and was wondering if I can use it (in a pinch) to move pallets. Buying a separate pallet fork for said purpose doesn't make sense, given the infrequent need, but my hay fork is used quite often. Thank you.

Just converted my Ford 1710 with 770B loader from pin on to quick attach. Also built a quick attach pallet fork frame. Build your own Quick Attach pallet fork frame Build your own Quick Attach pallet fork frame https://youtu.be/iEWQNHtc2SQ Link to adapter specs in the video description

Hello All. I operate a hobby maple farm and I'd like to make some improvements to my sap collection process. Right now I use my Kubota BX2200 and I tow a 55 gallon tank in a small dump cart. This is our first year using reverse osmosis so the sap collection and planning of boils has changed...

I have a 2,200 lb crate on a flatbed tractor trailer headed my way soon. I own a Kubota L47 with 400 lb SSQA forks. So my total lift is about 2,600 lbs. Kubota specs say I can lift 2,848 lbs to full height (9.5 ft) at pivot pins. I should be lifting from the flatbed at 4 ft high. Anyone...

I've been getting overwhelmed with invasives like buckthorn overtaking my fencelines and I've finally taken some action. I fabbed up a 36" wide root rake bucket based on the geometry of my 24" trenching bucket. My goal was to have it work wth my existing hydraulic thumb without any...

Can anyone ID it? I have this 4ft square brush cutter, gear motor says Omni Gear RC 30, missing any brand names. Another Problem tail wheel will not follow, always turns sideways. I have greased, clean repacked no change. This fork is slightly bent and May have been modified see pics. Thanks

Thanks for your collective patience; "what forks to choose" has certainly been beat into the ground in various ways, but after searching and reading I still don't quite understand :) In particular the affect of implement weight on 'practical' lift (as a lot of the weight difference is in the...