headlights

Concerning my 1983 John Deere 750 compact tractor, my hazard, work, and tail lights all work perfectly but my headlights will not work. The sockets each have two contacts and I have power to one of the contacts in each socket but no power to the other contact in each socket. Any ideas as to...

Headlight and related lighting would not come on and was continuously blowing fuses . checked fuse socked and it was shorted to ground . Troubleshooting brought me to the headlight switch . When i was removing this switch the harness / connector was laying on sharp part of the frame and this is...

Looking for an aftermarket brush or grill guard that is either adjustable so as not interfere with headlights and/or is of a quick attach/detach nature. Any recommendations? I have a Kioti CX2510 but if there's a maker that makes one for your non-CX2510, maybe they'll make one for my Kioti.

We all know the drill, driving at night, turn a bend and get blinded by oncoming high beams. You flash the other driver, they still don't turn off their high beams, so you just turn on your own and give it like you're getting it (or is that just me?) and a sluggish 2-3 seconds later they call a...

I bought LED lights for my 3020 and replaced the seal beam lights, I now get sort of a strobing effect with the lights. Does anyone know what would cause this?

I have a 5310 that the low beams will not come on but high beams will. Warning lights are working. Replaced light switch and flasher, cleaned the ground by the battery. All fuses are good. Power leaving the switch. Bulbs have continuity and work on high so believe they are fine. What am I...

Battery fully charged. No clicks when key is turned on. No headlights. No power to solenoid. Nothing. Is this a bad ECM?

Neither the headlights nor turn signals on my G3038H are working. Fuse is good, and I can hear the flasher relay working when turning in either direction. The combo headlight/hazard/directional switch seems to be fine (at least it connects pairs of contacts depending on the position). I cannot...