iseki tx1300

Any one know where i can get a set of bearings for a ke70 engine

Just found a survivor Bolens g152. I only need a couple parts to make this farm ready. Front PTO shaft mount on front axle is missing. I have the front PTO in the axle but the parts to connect the shaft to the front PTO are missing forward of the engine. Also Front grill is missing...

Hi All, I've just done an engine transplant on my TX1300. It now has a TX1500 engine in it. In fact, it is more TX1500 than 1300 as the rear transaxle and gearbox are also TX1500! However, in swapping engines I have lost all power in the rear lift arm. The hydraulic system is all from the...

New to me tractor hasn't been started in about 10 years. glow plugs seem to be working. Blead the fuel system seems like very little fuel is coming out of injection pump blead injector lines get smoke but no fire. No fuel is coming thru the injector return lines. hooked it up to 2 big batteries...

Hello all, I got a iseki TX1300 and i needed to replace the head gasket because it was leaking but upon disassembly i noticed the pistons were bad too so i'm going to replace them also. Buying secondhand is always a risk i suppose? But what i wanted to ask was the bolts for the head need to be...

So I'm new to this forum and like most people I signed up because I'm having some troubles (caused by my ongoing stupidity no doubt). My TX1300 4x4 has a front end loader and has been a great tractor. I've run it for over a year now clearing blackberries, tilling, and hauling things around in...

Looks like the weather is going to cooperate here this weekend so I'm going to push forward with a KE70 to KE75 engine swap. I plan on having it finished up by the end of next weekend. I'm not documenting every step, just a few snapshots. The biggest problem I had so far was splitting the...

Someone made an Iseki TX1300 into a MF look alike. They actually did a pretty good job with it.

Hi, can anyone help? I have just received my new head gasket for my Tx1300 but I cannot find a torque setting for the head studs. Does anyone know or can anyone help ? Thanks in anticipation.

Hello, I am new to the tractor forum. I recently purchased a nice farmette outside Hershey PA and picked up a Bolens G152 compact tractor to do the yard work around the place. When I bought the tractor it came with a power blade & snow blower. The problem now is I would like to get a belly...

Anybody got a hydraulic pump for an Iseki TX1300? I think there are Fords and Whites that are made by Iseki, with the same pump, but not sure of which models. I believe one example is the White field boss 16. The housing on mine split in the middle of a tilling pass. Thanks.

Iseki TX1300 won\'t start Hi! I have a problem with my tractor and hope to get some advice. Story goes as this: Starter has been very weak for over a year. A few days ago it gave up and it was time to get it repaired or changed. I checked the price on a new one. Original it was approx 900...