iseki tx1500

Hi there, I have the iseki tx1500f. I got it running but I can’t get the hydraulic lever for the 3point to work. The lever won’t move at all it’s locked up or something. I’m new to this stuff so if anyone has had this problem, please tell me how to resolve it. Thanks in advance.

Hi ! The glow eye of my iseki TX 1500 won't work properly, also the glow plugs won't heat up like they should. I placed a new glow eye, new glow plugs and replaced the wiring Involved with the glow plugs and glow eye. I also cleaned the threads of the glow plugs in the engine block because I...

I checked the water level in my radiator and noticed a thin film of black oil on top of the water. Checked the water while running the engine without the radiator cap. Some air bubbles the first half minute, then no more. Engine oil level ok, oil looks normal not milky. The engine runs as...

I have what I imagine is an older style fuel filter chamber on my tractor which has a metal collar. It doesnt appear to have a thread to dismantle it. Can anyone advise on how I get the old filter out and the new one in? Thanks.

Anyone have instructions on iseki tx1500 tappet adjustment? Ive managed to find a parts list and owners manual but is there a service manual out thete?

I have this custom-made backhoe that came with my iseki tx1500. From what i read on internet it is not a good thing to connect such a structure directly to the tractor. Because the tx1500 does not have a frame ( it is just the connections between engine, tunnel, gearbox, and differential) the...

Hi all, on my Iseki tx1500 they connected this excavator. But because of the way it is connected, one of the previous owner(s) removed the hydraulic part where the 2 lifter arms are connected to at the back. It is located under/behind the driver seat. Anybody has any clue on the name of this...

Hi all, my name is Kaz, i live in the south of Poland, just bought 1 hectare of land, and last week i bought an iseki tx1500 (2wd) second (3rd/4th/5th) hand. One of the previous owners built this digging machine (excavator?) and connected this to the back. Everything was running (starting) ok...

Hello colleagues today I turn to you to get information about an Iseki tx1500 2wd, I'm thinking of buying one with a mower cutter 1 meter wide, the tractor is in impeccable condition I just want to know if it is a good tractor or not, your task will cut malesa and grass in the back of the house...

Does anyone know the valve recession for a Mitsubishi TX75 engine? i.e. far far above or below the head surface the valve heads should be when assembled?

Can someone tell me what the "F" means? How can I tell what year mine was manufactured?

After 30 years of use its time to replace the clutch on my G174. Anyone out there with any experience on this I would welcome their input and advice. Thanks

hello all..... New here and hoping to share my knowledge and learn from you all. I"m new to working on tractors or diesel engines for that mather but working on motorcycles for a long time now. so here is the question.....bought a iseki 1500/bolens g174 but did not run great. there is some...

Ever since I removed the float bowl to clean the filter, the thing has leaked a bit. Then it drained the tank and my neighbour ran it dry, so off it came again. I tightened it carefully with a channel lock wrench. No go. Last night I assembled the thing and tightened it gently against the O...

Good morning Ladies and gentlemen, further to my initial posting in the introduction thread this is my first real post, so please be gentle with me. I have bought myself the aforementioned TX1500 which requires a little TLC. So I have some questions for those that know. In order to get at...

Hi one and all My first time on the forum. Have a request for help/advice. Will post in new thread. Nice to be here :)

Looking for decals, and type of paint to retore my tractor. Thank you, Steven

Just had a nightmare day! Tractor stuck in a bog and now no drive to the wheel either! Drove over the area loads of times and was fine, then maybe one too many times and it just dug itself right it. Anyway its stuck good and even worse while trying to dig and drive it out, lost all drive to...

I'm trying to get parts manual for iseki TX1500 coz i needed to buy spare parts. I need the parts no for the piston ring , head gusket and con rod bearing.

I am looking for a crankshaft for an Iseki tx1500 with a 2 cylinder diesel engine #ke75 and want to get some prices to see if it will be worth the money to repair.:confused:

Help My Iseki is strating very bad ,have change the glowplugs en battery (12v 45ah) and i have checked the engine compresion (25 bar) .When i'm lucky and he will start than he's working good. But the next morning it's the same story again.bad starting.Good to know the outside temp is between 10...

I have had this tractor since last summer, and so far am very happy with the performance. Added a Loader, 3-point parts, and general maintenance. Made up for the lack of 4-WD with the addition of weights and chains, hope I am still happy in the spring when the work really starts. I have 2...

after I run my tractor for about 45 minutes to an hour it starts putting off a blue colored smoke from the exhaust. I am pretty sure it is not oil smoke for 2 reasons, 1. does not smell like oils smoke. 2. I never have to add any oil. Any ideas on what this smoke could be from and how (if any...

I need some help on changing the hydraulic fluid in my Tractor. It is a Bolens G152 which I believe is the same as an Iseki Tx1500. My questions are: 1. How do I drain the old fluid 2.What kind of fluid to use 3.Does this tractor have a filter on the hydraulic system, and where 4.Could dirty...