john deere 160

I have a 160 replace the main drive belt and now it Studer's when operating driving in any gear, I had another 160 and trying to compare to see what different when operating. The main difference is the on the one that studiers when running is that the clutch does come up as high when releasing...

Each year I have owned the mower, I have had the blades sharpen or replaced, but the quality of cut has gone way down hill. Again, this year they were sharpen, but I did ask if they needed replaced. I was told that they were in very good shape and only needed sharpening. After moving two...

picked up a john deere 160. runs great but wont move in any gear its a peerless 801-038a 5 speed transaxle tighten the belts still nothing the pulley on top of the transaxle is spinning. dont under stand it woulden it have to have stripped gears cause its gear driven and not a hydrostat. any one...

hello I was mowing on my John Deere 160 yesterday I got off go get a drink of water got back on started up and when I flip the switch engages the mowing deck nothing happened flip the switch a couple times still nothing. not sure what is wrong can anyone help.

hello I was mowing on my John Deere 160 yesterday I got off go get a drink of water got back on started up and when I flip the switch engages the mowing deck nothing happened flip the switch a couple times still nothing. not sure what is wrong can anyone help.

I bought this 160 about a week ago getting ready to clean it up, after I clean it up I'll get some more pictures Click on this JD 160 2013 Rob

looking for 160 jd mower parts, especially wheels: thumbsup:

Anyone know where i could find one or a SnowBlower ???

Hey guys! Got a 1984 John Deere 160 riding mower, runs, starts and drives awesome!! However as soon as I switch on my PTO, it kills my mower within a matter of seconds... what could be causing this?? PTO switch works 100% as its brand new

Hello, I have a John Deere 160 tractor with a FB460V Kawasaki. The motor runs well, and has 83 pounds of compression. But when I cut my lawn it dies right down, I have rebuilt this mower all winter long and it looks good, and runs good, but has no power under a load. If anyone has any ideas I...

I have a john deere 160 and I have been having problems with the mowing deck not tiring on? I replaced the switch thinking that was it and nothing. I check voltage at pto and no voltage. Is it the voltage the? My battery re charges fine but can't mow the grass? Any ideas??

I have an 86 JD 160 lawn and garden tractor. I was cutting grass with it when all of a sudden the blades quit mowing, out of the blue. Could not get it to work for anything, so I turned the machine off. Now the machine won't turn over, as though the battery is completely dead. I was not...

I've got the cover and snap ring out but the tire won't budge. Any suggestions?

I have a 1980's John Deere 160 lawn tractor and need to remove the front axle for repair. The welded sleeve on which the axle pivots has broken off. I checked JD parts online hoping it would show how the axle was attached but it just showed the axle. Also the axle in the parts book is a...

I have a John Deere 160 that used to run like a champ. last year I had difficulty starting it. If I got it running i had better not shut it down. This year it wont start at all. gas is not the issue, new battery and new spark plug. I turn the key and it will click but that is it. I would...

my 160 john deere would start the mowing deck would work but the tractor would not move. Can any one help me.

My son was using my old (20+ yrs old) John Deere 160 lawn tractor for 20 minutes or so, stopped then an hour or so later got back on to finish up. He started the the tractor by depressing both the clutch and brake. It started fine but neither clutch or brake would release. It seems it is stuck...

I'm trying to figure out what year my 160 lawn tractor is. I can't seem to figure it out. The model # is MOO160T501503. The engine is model FB460V Kawasaki. thanks for any help.

I went to replace my positive battery cable and unhooked it from the battery and the bottom of the starter (I didn't replace it because it has an extra wire my new cable did not have). I reconnected the positive battery and now when I connect the negative battery cable, it makes the cylinder...