john deere 4105

My John Deere 4105 has been having an intermittent electrical problem for years - although it appears to be permanent today. The tractor starts fine and runs well but the engine dies immediately when it is shifted into gear or the PTO is engaged. Usually, I can get past the problem by dropping...

when I lift my three point hitch, the rockshaft does not stop lifting until all the way up and i have to manually move the lever to stop the rockshaft valve. anyone had this problem?

Hello. I have a 2014 JD 4105 that starts perfect when cold. After running it for awhile if I shut it down it won't start for several minutes. If I let it cool for 10 minutes or so it will start right up. If I leave it running it will run all day. I replaced the fuel shutoff solenoid and nothing...

Does anyone know the part number to replace the factory FEL lever knob with the Ergonomic handle grip like shown?

Can someone confirm for me if the FEL is quick attach/remove similar to the H240 loader on a 5045e tractor? I had one sales guy tell me yes, went out of town and the next tells me no. Which is it? No quick attach is a deal breaker for me as I need that thing to come off on a regular basis...

New member here looking for buying advise. Thank You in advance for anyone willing to share their thoughts and opinions.... I am in the market for a 40HP range tractor and have narrowed it down to the the JD 4105 and kioti ck4010. Both have advantages and disadvantages.. What would you guys...

Does anyone out there have a wiring diagram for the 4105? Any help would be appreciated.

A Buddy of mine has a 4105 John Deere. He let me use it the other day. I aw that the hour meter wasn't working. When I brought this to his attention he told me that even if the display isn't working it still keeps track of the hours. Is this true? What could be wrong with the Hour meter? He is...

I have had my John Deere 4105 since 2010, got it new. It has a whopping 275 hours. I just use it to mow 5 acres and push some snow off the driveway in the winter. Earlier this summer the tractor started stalling out on me. I'd be mowing on along and out of nowhere the RPM would drop and the...

My signals nor flashers work. fuses are all good and power switches at signal switch. Im assuming after the switch it must go thru some type of flasher. I have tried looking up the part number for flasher but cant find it listed in the parts index does anyone know the part number. If anyone...

Hi, new to the sight, I have a JD 4105 with 290 hrs. just dumped the tranny fluid, removed suction filter assy. need some help here, do you just clean the metal suction filter or do replace it? about $75, I have been told you can just clean it? looks like new from the outside , but if it needs...

I am going to pull the trigger on a new JD 4105 next week; just waiting on the trade-in value on my JD4110. I'm getting an H165 FEL, MX6 cutter/shredder, and having them add a third SCV Kit so I can use a grapple. My 4110 has the JD quick connect (iHitch?). Makes hooking up the shredder a snap...

After getting fed up with the lack of capability from my overpriced Kubota B3300SU that I bought last July, I finally worked the deal on a new 2014 last production 4105 with 300cx FEL. I ended up at $23,800.00 total on the new 4105 unit with 0% for 5yrs through JD. I received a promo mailer from...

I have a new John Deere 4105 compact utility tractor and a new MX5 rotary cutter. I have found that you cannot move the draft to fully raised without the front lip of the MX5 hitting the rear tires. The mower and tractor are listed at compatible. Has anyone else run into this problem. Is there...

Hey everyone. First post...Actually 6th i see as i edit. Don't remember what the heck i posted about previously. Member since 2010. My needs are varied so sorry for long post. I want a compact tractor to do a variety of things. I have rental property. Houses in the city and several small...

Has any one had a problem with a john Deere 4105 kicking out of 4 wheel drive when backing up mine has done it since it was new and now it only has 95 hours on it. It went to service last week and was split in half and all new parts installed got it back and its doing the same thing now they...

I recently bought a John Deere 4105 Compact Utility tractor. This was an upgrade from my late-1970s Massey Ferguson 230. Tractor was delivered and I read the manual and got on. I put the gear in high and drove around and I am noticing a grinding noise from the transmission when I am in motion. I...

I recently began having trouble starting my 4105. I was in the field and had to shut it off, and when I tried to turn it back on I had to turn the key back and forth several times. It worked like that a few more times, and then progressed to the point that I had to push in on the key as well as...

MY uncle is looking at buying one of these beauties brand new. Dealers are right next to each other (Union, Maine) and have decent reps. cost is about the same too. Kubota is 46 horse vs the JD 42 but other than that the lifting specs, weight, features are about dead even. He is leaning to...

Does the JD 4105 CUT have an aluminum rear end? My 3320 does and I am thinking about trying to get away from aluminum. Thanks

This is for you 4105 owners, do you ever wish you had a 3 range hydro tranny? Ever need a lower gear sometimes? What are your thoughts. Been looking for a new machine for a year or so and I like the 4105, but drove a Mahindra 3616 yesterday w 3 range hydro. Nice machine for the money, stupid...

I have a John Deere 4105 with the electric PTO Ive learned to engage it at an idle then increase speed the idle back down before disengage. I just bought a MF 725 haybine. Its a great machine however I think my Deere is causing this problem. The pulley on the bottom roller which is driven by a...

Evidently, my tractor PTO will not work a chipper type attachment. According to the operator's manual "Note: The Rear PTO is only operational with the operator on the seat." I have tried starting with the park brake on and the seat up -- no go! Other than putting a sack of cement on the seat...

I'm new to the forum, but have spent a lot of time browsing over the last few weeks. We were looking for a utility tractor to help with miscellaneous tasks around our property and landed on the John Deere 4105. I won't go in to the details, but if anyone has any questions about the tractor I...

Hi everyone. Long time no post here. I've been wanting to up grade my 2520 for a slightly larger tractor with a more capable loader. The 4105 has all I want except it doesn't have dual brakes. I know it's a lower priced tractor, but a single brake on any tractor is beyond cheap. Two questions...

I have a new JD compact tractor with a root grapple and a bucket for use with my loader. I have some trouble disconnecting one of the 3rd Function hydraulic couplings (used with the grapple). I eventually got it after learning how to relieve the pressure in the line. Now, one coupling (green)...

I have looked and compared tractors for over a month. I looked at the 3038e first (mainly because of price, then I looked at the Kubota L3800. I felt the 3038e was a little to small so I really was leaning to the Kubota. Then I looked at the 4105 JD with FEL. JD offered the best financing...

Good morning all, We are looking for a tractor and have come up with either the 4105 or the 4005. Both fit our needs well but I have a concern over drive train. One is 4cyl (4005, Yanmar 4TNV88) and the other is a 3cyl (4105, Yanmar 3TNV84T-KJT). I realize output is nearly identical and...

Loving the 4105 ! Some before and after pics

Been awhile , but got on tractor and in the HR meter dash , there is a small blinking " H" or <> blinking , hard to tell what it is . Almost looks like you flashers blinking in your car ? What is that ? I can not remeber if it has ALWAYS blinked , or is something is wrong ? I think its...

Hydraulic fluid is leaking from the fillcap located behind the top center link on rear of tractor . John Deere knows of problem but did not fix ( out of warranty ) The solution number is 80527 ( JD number ) Install parts , this will effectively move the fill cap/vent from the splash of oil...

Got to put a few hrs on the 4105 ! WOW !! I LOVE IT !!! its great ! I pused down about 20 ft wide and 50 foot long , tree filled sandy area . Bushes , trees , the 4105 dug it out ! I also learned how to scoop and fill up holes !! My wife got to drive it alot , I would pick up the small...

Looking at 4 different tractors , new vs used . 2005 l3130 Kubota FST with back hoe used , 2010 L3700 HST NEW , 2009 L3400 HST used ,and 2008 JD 4195 HST , ALL have FEL s. All are around $16,000- $16,500 The John Deere is a 4105 HST , 300CX FEL quick attatch loader / bucket ...

I'm having trouble deciding what tractor I need - and what I'm comfortable driving- anyone care to help me through the confusion? I've had a 1973 Kubota L185 for years and now I'm ready for a big girl tractor for a 50 acre mountain farm - cows and forest - no row crops. The little one is...

Need advise on pricing (Canadian) for the above mentioned tractors. I recently priced a 4320 and got a price of $32336 CDN plus tax (no cab, 400x loader ). I found online pricing for a 4105 for $25327 CDN plus tax (no cab, 300x loader) Basically can anyone with experience on these models tell...

Will farm ballpark 5 acres and have 5 Acre MX track. Possibly hay and possibly produce. Will have nursery, small vineyard, small orchard and a couple of greenhouses. Combination clay and sandy land. MX track requires a lot of front end loader work and would like to have to be able to use a...

Will farm ballpark 5 acres and have 5 Acre MX track. Possibly hay and possibly produce. Will have nursery, small vineyard, small orchard and a couple of greenhouses. Combination clay and sandy land. MX track requires a lot of front end loader work and would like to have to be able to use a...

I purchased a JD 4105 with a 300CX loader and a 73" bucket. I have been moving rocks and dirt and I noticed the other day the bucket does not sit flat when the tractor is on flat pavement. When one side of the bucket touches the pavement the other side sits about 2.5" higher. How do you...

New member here. Long post but wanted to get my thought process down I have a 30 acre horse farm. The tractor will be used to pull a 6' plug aerator for my pastures, 6' bush cutter for my pastures, 6' box blade for maintaining my riding ring and driveway, 6' harrow drag for the riding ring, and...

found 4105 4x4 with loader and canopy only 13 hours at dealer, 19,500 , dealer said original price was close to 25,000; does 19,500 sound like a good price and what would be a good 6 or 7 foot cutter for it, just cutting fields 1-2 foot grass weeks thanks

I've read a few posts about customization for the 4x20 series tractors. I' presently evaluating a 4105, a 3720, and a 4320. Budget is a big concern for me and the 4105 is really all the tractor I would need. Problem is, you cannot get any sort of speed/cruise control on the thing. This is...

Looks like I'm selling my NH TC35a. Someone fell in love with it and made me an offer I couldn't possibly refuse. It was a pretty good tractor for 5 years, but alas, my NH dealer closed down. My choices now are green and orange, and I'm looking for a machine in the 40-45hp range. Orange...

Can anyone give me the low down on the tractor. Where is it made etc., Seems to be a good price and <16000 new with Hydrostatic transmission. I'm not sure how much a loader would add to it. How the power, reliability etcl,