john deere 5525

Hi I am looking for a loader for a john deeee 5525 I am mostly going to he using this for snow removal and light use in the summer as I have a skidsteer, I'm having trouble finding a loader that will fit jd 542 seem to be a common loader for this tractor but I can't find any for a reasonable...

anyone out there had fixed their problem. please share how you did it. my 5525 starts sounds good but will not move.

Want to replace the in-line fuel filter on our JD 5525. Where is the in-line filter located on this cab tractor? The water/fuel separator filter has been replaced. Thanks in advance.

I have a problem that doesn't make sense to me and I can't find a electrical diagram. I have have a power reverser that will not move unless I but the pto on. I searched the forum and didn't find the same problem. I can't be the only one with this kind of problem Here is what I have, turn...

Hey Guys, I was bush hogging today.....about three hours in.......about 15 minutes after filling up my fuel.......I was going down a hill and the tractor completely shut down.....no electrical or anything. To make matters worse when me and my dog got out to check things out we stirred up a...

My 5525 is blowing the F1 fuse which is said to be the ignition switch fuse. All lights work but as soon as I turn over my key it keeps blowing this fuse. Any ideas what it could be or where to start to track down the problem? I'm by far no mechanic so all help would be much appreciated...

My cab 5525 will not turn over, when I turn the key none of the gauges or lights come on but when I turn the light switch on the dash on the head light and blinkers work but nothing when I use the key....why don't I have power going to the ignition?

JD does not make a training seat for this model but I understand there are some off brands out there that work. Anyone know about this?

I have a JD 5525 bought with a 541 loader on it. Cleaning up Hurricane Matthew damage, was lifting tree off my mother in laws house twisted the loader. But it did lift the tree to get it off the house. Loader damage will cost more than hole in roof will. There is a message in there but tired...

I've been looking around the Forum and see many opinions and posts about grapples for 20-50 hp CUTs. What about a heavy duty grapple for my 91 hp JD 5525, which is not a CUT? This tractor has a lot of power and weight. I think I want to get either a Bodozer or an Anbo as the rake type grapple...

try to find out way the tractor just stop going up the road will go in reverse not forward

JD 5525 engine cranks but will not go into gear. No gauges will come on instrument panel. Fuse to key switch good

JD 5525 tractor will crank but will not go into gear because the gauges will not come on ??

I'm looking for input on the difference in capabilities between the JD 5525 and 5525N. I need a tractor that will handle a 3 box, Kasco Eco Drill on hilly terrain more comfortably than my JD 4720 will. The drill weighs about 2000+ lbs. when loaded with seed and tends to overwhelm the 4720 on...

My JD 5525 came with one outside (left) cab mirror. I need one (complete) for the right side of the cab. Other than a JD dealer, any vendors that may have a OEM complete mirror? Thanks, SB

I have an opportunity to purchase a 2008 JD 5525. It's 4WD cab model w/FEL 200 hours for $39,500 (firm). Is this a fair/reasonable price for this low hours JD tractor in excel cond? Appears to have been stored in a barn. Thanks for all relies in advance! SB

I am looking to buy a JD 5525. It is a 2006 model with 400 hrs. It comes with front end loader, 8ft shredder, and hay spear. 45 k seems to be a good price the tractor is in excellent condition. Any comments, suggestions on price and model of tractor?

the tractor has power reverser and has stopped pulling in either direction

I purchased a jd 5525 with 650 hrs and want to check/change the front wheel hub oil. the manual seems to say use HY-GARD oil, but that seems to be the same oil to use in the hydraulic system. Is this correct? I would think the front hubs take something more like a 90-120w gear oil.

where can i find engine torque specs to rebuild a cylinder head on a jd 5525

Looking for some help in picking replacement tractor to pull round baler, bale wagon. I have been using 100hp tractor with 90 pto which has been plenty of power. Found a Jd 5525, 2008' with 650 hrs. New loader, cab, air, 4wd, 2 remotes, power reverser, air seat, very clean, 44k. Wondering...

I am thinking about this 2007 John Deere Tractor 5525 90 hp mfwd with 1700 hrs. I know it has about double the power of the 5225 and I've had great luck with that. Has anyone had any trouble with one of these? Jake!

Ok Im new to this forum. I dont know if this subject has come up before but I have been repairing the cooling system on my 5525. I had the entire system look like it had gray pudding in it. My dad and I pulled the head, radiator and oil to water oil cooler and found a gasket that looked like...

Hey guys I got my demo on the JD 5525 today and have the tractor for the weekend to sit around.I like the tractor but its kinda high with stock tires also its a pig on fuel was kinda expected there.But just can't get use to the fancy electical controls being as I still have a ford 3000 and 4000...

Hi there just looking for some advice here I'm looking at buying a new tractor next week but I have 2 options buy a Kubota M6040 4x4 new or JD 5525 with 600 hrs 4x4 used.What is best on fuel and lasting longer without problems?

I am looking at buying an 08 jd 5525 with cab and loader it has the 12 forward and reverse transmission, they are asking $30500. It had less than 800 hours and its a 2wd. Any info on this? Is the price right? Does this model have any issues?

I have a JD 5525 4WD tractor with loader and liquid filled R1 tires. It weighs around 9,200 lbs and is rated at 91 engine hp. I need to plow red clay soil (with a couple inches of top soil) with rocks mixed in. In addition, the land is well sodded over and there are roots from small woody...

I want to add an air ride seat to my 5525. My dealer is saying it can't be done. What is the deal? Anybody add one? Thanks, D.

TBN people can never get enough pics. It was a really wet winter. Was out putting hay out and snapped these pics on my way back to the barn. No, I didn't get stuck. Love that tractor, D.

I have been talking to a dealer from several states away from me that has a new JD5525 for sale. It is MFWD, ROPS, 9/3 tranny with mechanical shuttle, isolated open operator station; Dual rear SCVs, Dual mid-SCVs, joystick controller, cold weather package, and front weight support. The msrp...

On a JD 5525 MFWD, cab, 24f/24r, does anyone know where the valve is that adjusts the hydraulic flow to the rockshafts? Not the control inside the cab, but the one under the cab. How hard is it to access and adjust?

I have a JD 5525 that I have had for about a year. A few months after I bought it and after it sat for a week or so it would start and then after 10 sec it would stall. I had the turn it over for about 30 sec and then it would start and run ok. The dealer had a recall for something else so they...

I'm having some issues with my 5525 John Deere. Just finished repairing some damaged wiring to the taillights, and now the tractor does not go anywhere when gear is enagaged. Any help would be great, thank you.

Hello, Deere's website shows that the 5525 4wd can handle the 5x6 baler. I bought a 5525 for my 535 baler. Anyone running a 5525 on a 5x6 baler??? If so how do you like it. Thanks

We have a 5525 that sometimes will not go forward/reverse without clutch when I am operating (150 lb). When a 115 lb operator is using it it never works without the clutch, and when a 200 lb operator is using it always works. It can be in gear, engaged in forward or reverse, but there will be...

I had too much time on my hands today. Snapped some pics of the tractor while was out feeding the longhorns. D.

I know there was a thread on the ePTO and I could not find it. I was out working the 5525 today some and took some pics of the ePTO setup so people could see it. The tach shows 540 RPM PTO at 2 different engine RPMS. 2 PTO levers: One to put it in ePTO or regular and the usual engagement...

I finally got around to taking some pics of the new training seat in the 5525. I even got a "model" to demo it. We had to bend the PTO handle a tad to make it clear - no big deal. D.

I finally got some pics of my new WR Long flat toothbar on my 5525 bucket. This bar is slick. Flat on the bottom, so I can still back drag flat - not like many of the others out there. First class people at WR Long. Had to buy it thru the Kubota dealer, but oh well. Enjoy, D.

What's the smallest trailer I can get away with to haul my new JD 5525? I have a Ford 250 diesel to pull it with. Thanks for the help.

Hi! I'm looking to upgrade my JD4500 to something I can do more farming with. I've narrowed my choices to the Kubota M9000 or a JD 5525. I've spent quite a bit of time researching each machine and a little time driving each one. To me, there is no clear winner. The Kubota has marginally...