john deere 830

Hello all, I have been having hydraulic issues with my 830 JD 3 point lifting power this spring. How it started was I dropped the 3 point arms with a box blade too hard last year and it ended up breaking the cam follower tip that links to the rockshaft linkage inside the top cylinder housing...

I am trying to resolved this problem with the 3 point lift. If anyone has any experience, I would appreciate a little help. I don't think the front pump is getting oil from the rear pump and I am not sure what can be obstructing it. I removed the cap to the filter relief valve, but I can't pull...

I have a 1974 JD 830 and was wondering how to find out which loaders will fit it. Thanks in advance!

Hello folks. I'm located in the heart of the Texas Hill Country not too far from Blanco, Texas. I have a 1974 John Deere 3 cylinder diesel model 830 that I've been fixing up. I found your forum while searching for help on reassembling the rockshaft housing on my 1974 John Deere 830. Found a...

A friend has one of these she would make me a good deal on. It has been sitting for quite a while. So I put the jumper cables on it and it turned over real slow and then nothing. Just clicking. Took the battery out and fully charged but still only click at starter. Removed starter and it...

My 74 john deere 830 has power steering that works fine to the right but lacks assist to the left half way works when it is cold but when the fluid warms up it hardly works to the left fine to the right though thanks again

I have a 73 John deere 830 3 cylinder diesel. I am experiencing some hydraulic problems. The pump sounds like it is whining but lifts great sometimes it will hesitate alittle lift hesitate alittle more then pick all the way up. What could be going on the filters need changing/ cleaning new hydro...

A friend of mine called me and asked if I was interested in one of his tractors that he had. The tractor was one of his feed lot tractors on his dads dairy farm. Tractor is in fair shape but is going to need a new set of lift arms. The sheet metal is in fair shape as it can be for working on a...

hi, just wondering if anyone out there has come across any inherent problems with these mowers, am looking at buying one second hand and know very little about them as my area is big on new holland,no jd gear around. also looking at a nh 1411, and a claas disco trc 3000.any help would be appreciated

I need to find a fuel pump for my John deere 830 Serial # 143355 . The john deere dealer parts store said that it was obsolete.

This 830 is a non-running tractor. There is history of one in my area that broke the crankshaft long time ago and due to the expense it was never repaired. This tractor is to be auctioned and so my question. What would be a reliable way to determine if the crank in this tractor is broken or not...

JD830 {2Cyl.} ran from 1958..8300000 until 1960..8305301,than JD ran the JD830 {3Cyl.} from 1974..109507 until 1975..145500...I've visit Yesterday Tactors website also JD plus many more..looking to see what the differents in pto horse..1958 thru 1960 than compare it to 1974 & 1975..any info...