kubota l185

Hello folks, Im helping a friend with a 1970s Kubota L185DT; can anyone help verify the part number for a replacement starter please? Im seeing number 15221-63014 or Nippon Denso 028000-3360-1; does that look correct? Thanks so much!

New Holland L185 starts and boom and bucket controls work fine but drive motors will not move skid steer this is a standard control unit with foot pedal boom and bucket controls. The AIC posted one current history fault (charge pressure 254) I suspect this may be the problem but do not know...

Picked up a new project today in descent shape and I plan to make it much better, it is a Kubota L185 with 669 hours in very good shape and I am fairly sure it has the original tires if they were Firestones because that what it has and they have minor wear and look the age of the tractor due to...

As many people before me have encountered I am having a hard time priming the fuel system on a Kubota L185 equivalent tractor. After reading as much information as I could find and trying my best, I still can't get fuel to the injectors. Here is the back story and what I have tried thus far: I...

As many people before me have encountered I am having a hard time priming the fuel system on a Kubota L185 equivalent tractor. After reading as much information as I could find and trying my best, I still can't get fuel to the injectors. Here is the back story and what I have tried thus far: I...

I have a low budget of about 5k. i found a yanmar 1500d 650 hrs per the ad, who actually knows, bush hog loader, back blade and single bottom plow. i also found a kubota l185dt with loader and back blade, engine rebuilt 100 hrs ago, not sure to what extent. i have one acre that is a bit of...

I have a L185 that had a belly mower driven by a front PTO. It used a electric clutch but I can not find any information for it. What is the model number of this? Thanks

The L185 sat in the woods for roughly 12 years it's up and running maybe not the best at times but now the steering is broke, the l345 sat up for 8 years and the crankcase was filled with water when I first received it the water was bypassing the Rings going through the stack into the crankcase...

I am considering getting a wood splitter for my Kubota L185. Is this feasible, or will I be disappointed in it's performance? The second issue is that at this point, I have no connections for hydraulic attachments, but I believe that connections can be added. Is this correct?

Well I have been trying to get my kubota L185 to run ever since I replaced the steering sector gear box. I bought the tractor a few weeks ago, it had a lot of slack in the steering wheel. I ordered a new steering gear box and installed it a couple of days ago. As you know if you have ever done...

I have a L185 and I wonder if a backhoe would work on it? Next town over there is a 3 pt backhoe for sale it has a pump that goes on the pto. The guy wants $750. for it

I have a L185 that I picked up in september of last year, It runs good but after it warms up it smokes it has 1400 hours on it. So I am thinking the rings might be worn out or valve guides. I changed the oil 2 times since I picked it up just to help clean the crap out of it. Any Ideas?

i'm trying to find info on adding hydraulics to an older tractor. not a mechanic, so i need baby steps. I will continue my search but if anyone knows of a thread or two, or if you can advise a publication of some sort, please let me know.

Anyone have any experience installing a block heater on a Kubota L185? What would you recommend for a heater? Is it a do it yourself job? Are any special toosl required?

There's a little plug on the side of the engine block that the tractor keeps blowing. We figure the first time it was just due to age, but when we tried to replace it, we got about 4 hours out of it, then it blew out again. Spews oil everywhere... Perhaps is it supposed to be reinstalled from...

used tractor in oct. to plant green field and replaced woods belly mower after and everything worked fine. started up again in march and lift lever would not budge,I screwed lift speed knob in and out and it would raise half way ,but much harder to move lever. I cut about a half acre and checked...

Can anyone tell me how diffacult it is to replace valve seals and guides on a L185 kabota 2 cyl. diesel? what special tools do i need. valve spring compressor Im sure, anything else?? Thanks

I'm a tractor nut: I have owned many many. Used to work on them commercially for retail. So retired and bought and sold ones i repaired.

I'm in need of ag tires on rims for my 2wd kubota L185. I found some 12.4-16 ag tires and rims from a B2100 Kubota. Does anyone know if these will fit or will I need to locate the 8.5x24 ag tires that the book calls for. Any help would be appreciated.

Just got a L185 w/loader and it has turf tires w/chloride in them . Rear rims are rotted out. Kubota dealer gets $225 each for them. My tires are 13.6x16 and are in great shape so I need 2 rims any ideas ?? I just e mailed Arron at Hoye to see if he can help I also have a Ym 240d Yanmar Thanks

Have a L185 Kubota,noisy in only first gear. Major expense? Just replace 1-2 gears? Don't think it's the throwout bearing, noise only in first gear. What is my next step in diagnosis? thanks

I am new to this site,but I am looking for some used rice paddy tires for my tractor. I have a L185 kubota. I bought it a couple years ago. Don't know much about the tractor except I was told it was made over seas but what isn't anymore. LOL!!! Anyway if anyone has some laying around they...

can anyone tell me if a B 6000 belly mower will fit an L 1501 tractor, i've run across two of these at unbelieveable prices and i hate to pass it up if it will work!

I think the front main seal is leaking on my L 185 can anybody tell me how hard it is to replace.

I'm thinking of trading a guy my case 440-H backhoe for a l185. Is this a good tractor? It has a kubota loader and a boxblade on the rear. I'm not sure of the hours but it looks to be in real good shape, but needs a hood, and the tires are weather cracked. My gas powered backhoe hasn't ran in...

Does anyone have a good picture of how the roll bar is installed. I have the Model L1132 instructions with two small pictures and can't really see how some of the additional brackets mount. I appreciate any assistance.

Has anyone experienced governor problems on a L185D (or similar) ? The throttle control would , intermittently, not let the engine go to full rpm (2850) and now will only idle. The throttle linkage is good and moves the arm on the governor shaft and the engine stays at idle. Is it possible...

on the dipstick there appears to be a high and low mark (about an inch and a half apart) between these are some letters and numbers Ive never know what is L and H or add oil marks are on it. dipstick seems rather useless

Have just bought l185dt with starting problem and would like ideas on the cause. When I start the tractor the throttle needs to be on full to get it going. It cranks a while and when it starts to fire, belches smoke and runs rough till smooths out and then you can throttle down.Also need to shut...

Ok so i was running my L185DT the other day...had to pull start it with my yukon and a friend...whole other story and problem... but anyway the hydraulics started to get a little jetly like there was air in the lines or something is that the problem? If it is the problem can I just dump a few...

Everywhere I look they are expensive and shipping on books makes it even worse. Anybody know where I can get a PDF of the owner's manual? New to tractors and need to know about fluid changes and any adjustments/checks that I need to make. Any help would be appreciated.

I recently bought a L185 with a mower deck. I was cutting my 10 acres when the belt snapped. I bought a new belt, but I can't remember how to put the new one back on. I drew a picture but I can't seem to make it right. Can any one help?

Ok so I have a Kubota L185DT and it wont start it self. The glow plugs get hot and it cranks and cranks and cranks with white smoke out the exhaust but never actually gets up and goes. We have resorted to pull starting it with our Yukon or our International 244. Once we pull it and get it...

710 hours. Good shape. $2500obo. sound good? Any definite quirky issues with the L185? thanks for the help.

I have a Kubota L185DT, the front PTO spline is shot, I called the Kubota Dealer and his IPL shows a sheave without the spline, the loader manual shows the pump but not the parts connecting it to the tractor. Would anyone here have any suggestions to help me resolve this problem??? Thanks any...

Looking for information on the drive coupling for the hydraulic pump the one on my tractor broke and the pictures i found on the web dont match what i have the one i found on the web is a chain coupling and mine was a woven wire or cable type coupling i think the loader is a L1720 model loader...

Okay what are the pros and cons on the Kubota L185 tractor?? Found one, asking price is $2000 with a 4foot shredder. Sound like a decent buy? Thanks for any input!

Have an 04 New holland L 185.. had a smaller hydrolic hose bust under the seat.. no idea how... Replaced...and now the machine.. will barely move forward or rearward in low gear.. and barely creeps along in high.. bucket goes up and down fine... but cant load on trailer to move to shop... mick...

Anyone know the valve settings & head torque on the L185? Thanks, Danny

How big a disc can I pull with this? It'll be on flat clay-based ground. Why doesn't info like this get put in the owner's manual??? :confused: Thanks Hil

We just bought a cute little L185 to mow our 5 acres of flat pasture with;it came with a Kubota 560? finish mower. We're not experienced tractor owners, so I may be coming here alot asking 'stupid' questions of you. We live in MD, have 3 horses and a bitty farmette. At some point, we'd love...

I have a L185DT 4x4 that I am considering selling. My property where we are building has to many hills and the narrow stance of this tractor is not safe. I have the wheels on my 3130 set at the widest and still must be careful in most places. The L185 has 850 hours and in very good condition...

We are putting together everything for a FEL build, it looks like we may get an older FEL that we will customfit to our tractor. Our question is this, the Hydraulic pump on there now is 3.7 gpm, and runs the 3pt hitch stuff. We have heard two different opinions. One is that will be fine for...

I bought a Kubota L185DT for $1200. However, it is missing the 3 pt, hydraulic pump, shaft to the tront diff. and has been wrecked, with the radiator and cowling bent out of shape. Wish I had checked for part availability before buying, but why would I do that, it would have been the wise thing...

New guy here...great site! Does anyone know where I can get a loader (new or used) for my ole 82 L185? Thanks for any suggestions. Lee

owning-ML-775084-ML- Kubota specific post moved to Kubota Forum

HI newbie here, 1. Does the transmission oil/fluid also lubricate the diff/rear wheels and 2. Do you fill it all from the cap just behind the gearstick pto lever. Also how much fluid would i need to by to rplace it regards jim

Hello all! I am new here.I need to know how to unbolt clutch so I can change fan belt on a L185DT kubota with front mount snow blower attachment.Thanks for any help.

Does anybody know where I can get serial number lookup info for Kubota tractors. Websites? Post a link if possible. Thanks

I am interested in a front loader for my Kubota L185. Due to it's age I believe I need to look at after market brands. Any ideas or recommendations on which brands?

I have a chance to purchase a Kubota L185 tractor for $2600 Is this a good deal? The tractor is in fair to good condition with 1100 hours, but I don't trust hour meters. I'm not sure of the year, the guy said 1980. It runs good and everything seems to work. It also comes with a Woods belly...

HI new to the forums although i have been lurking for a long time. I am looking to upgrade my ym 1700 to something with 4x4 and came across an ad in our local paper for a l185 dt 4x4, allied 180 loader,allied snow blower woods 5 foot finish mower and a tiller. although i do not know the hours or...

I have a little problem with my L185. The other day as I was warming up my tractor I heard a little "pop" and oil started gushing out. Fortunately I was right there and could shut it down before bad things happened. On both sides of the block are little rubber plugs that are inserted into...

Kubota L185 \"R1\" Agriculture Tread Tires for rear. First of all thanks to Kuby for the info on the loader hookup. I used and abstract version of your set up and it works great. My L185 came with 13.6 x 16 Turf Tires. I can not find that size AG Tire. I need a set of AG Tire wheels for this...

Does anyone know how to redirect hyraulic flow from 3 point lift to a loader on a Kubota L185? I have been told there is a redirecting valve that bolts onto the hydraulic block in front of the drivers seat. The dealers look at me funny when I ask about it. Has anyone found a good way to to...

I have mounted a Koyker 110 Loader on this tractor but cannot get the hydraulic supply correct. I was told there is a "redirecting valvebody" made that bolts on to the hydraulic"block" under the front of the drivers seat. Does anyone know of this or know how to redirect the flow past the...

It's a Kubota L185 that was showing signs of a weak battery. Over the past few weeks, I've jumped it several times to get it going with no problems. Tonight I went to jump it and as soon as I had a good connection, the started would kick in and crank the motor. I had the key switch in the off...

I am in need of some hydraulic/transmission fluid for my Kubota L185. The local auto parts store has this "Super Trac" fluid. The label lists Allis, John Deere, Massy, White, Farmall, and some other tractors that is recommended for it... but no Kubota. I know that Kubota recommends UDT fluid...

Hi Im having trouble finding a replacement bendix for my L185. Could anyone lookup the part numbers for me or scan a copy of the diagram of the starter motor from a manual for a l185 Any assistance would be greatly appreciated Cheers Siphoxolo South Africa

As my brother in law moves out of state, I have to decide something right away. He will sell me his Kubota setup for $4,000. This includes the tractor, grader blade, bucket in front, tiller, plow, and a couple of other small implements for earth levelling and heavy gardening. No mower, whcih...

ok.. new owner here with what I am sure is going to be an embarrassing question.... how do I check the transmission/hyd fluid level on the L185? I have looked for a dipstick, a sight glass, but have not found anything. I opened up (what I am assuming is where you add fluid... the place right on...

Hello, I am a new tractor/new diesel engine owner. I bought a Zen noh Z1501, which I have been told is equivalent to a Kubota L185 (I understand about the grey market tractors). I bought it from my uncle and will be using it to cut brush and spread dirt, other things around the house, I only...

What is the size of the PTO Shaft on a Kubota L185?

I have recently aquired an old L185 without any lift arms. They are too expensive to purchase here in south africa. I would appreciate any spec so that I could have some made. email me at siphoxolo@yahoo.com. Thanks Sipho

Hi Folks, Someone in my area has an L185DT with a loader for sale for $6,500. I can't find the specifications for that machine as they haven't made it in some time, but I beleive it is an 18 diesel 4WD. He says it has 375 hours on it, which seems pretty low for an older tractor. Anyone know...

I am looking at a L1801 ,which i believe is the same. It has 750 hours and looks in good condition. Is this model any good and is there anything I should look for in particular? I would like to fit turf tyres, are there any good ideas for adapting truck tyres/rims? Its 2wd

I've described my dilemma in the general buying/pricing forum, but though someone might be interested in heaing the the <font color="orange">'Bota</font> I looked at earlier this evening... Found it in the local paper's classified, in the "garden equipment and supplies" section not "farm...

Trying to give the old girl a facelift , anyone have a grill they would part with? Thanks Larry

Hello all. I have an L185 2 wheel drive with no FEL. Using the slasher and back blade gives me the jitters as the front wheels come off the ground all the time. I am planning to add some weight to the front (can't weld so will have to put some thought into it to tell someone else how to do...

Recently while using my L185 mowing I have noticed oil dripping from breather tube after engine gets warm, what would cause this? Only other thing is it starts real hard when engine cold, like only running on 1 cylinder and takes quite a few trys to start it, is this an injector problem? Runs...

Recently bought a L185 and have found it is hard to start, what is the best procedure to staart this tractor, after preheating I turn the key to activate the starter while decompression switch is out then i slowly push in decompression switch until it catches but after it trys to start seems...

Can anyone give me info on this tractor, dealer has a 2wd diesel with 1500 hrs with mower deck for $1800, tractor appears in good shape but dealer does not know much about it. Can anyone fill me in on these, what are the specs, what are the weak areas etc, all i want it for is mowing about 3...

I Have a friend that needs an ignition key for a Kubota L185. I suggested to him that he start with the local dealer. Anyone know of another source? Happy Holidays everyone.

The diff lock on my old L1501/L185 works OK but won't pop back off. It is apring loaded and should only work when pressed down. But mine sticks on and I often have to reach down and pull it up with my hand. Any ideas ?? Cheers <font color=blue>Neil from OZ.</font color=blue>

Hey Bob, here is that photo I said I'd send. It is of my L1501 which is a grey copy of our L185. Not sure if you guys got the L185. Does it look like your L175? Cheers <font color=blue>Neil from OZ.</font color=blue>

I have a friend who is looking to get a cab for his grandfather’s L185DT. He has no idea what they would cost. Any ideas? Eather new, or used. Also some one told him this was a gray market tractor, does it cross to an American model? Thanks.

Anyone know what temp these are supposed to run at? I'd like to fit a temp guage, as after spending $6k on a rebuild for my diesel Toyota, I don't want another overheated engine. Is there a plud or something where the sender unit can be installed ? <font color=blue>Neil from OZ.</font color=blue>

I own a 1981 L185 F with 650 hours, could any one tell me the value of this excellent piece of machinery?

I saw a post earlier where someone was asking about running a 5 foot bush hog on an L185...brought to mind there is a L185 Shop Manual going on ebay (currently) @ $9.95. The info is: Kubota Tractor Manual L185 thru L355 Item #462353319 At least you would have specs and shop info!