kubota l3200

Decisions Decisions...Ive narrowed my choices down to either Kubota L3200 or the L3800 AND the JD3038E..... here is my current debate....Is the L3200 a better choice than the JD3038E....both are very similar in price. I know the Deere has more HP. But.....how does it compare overall? any...

I am looking at the B3200 with FEL, HST, and BH, quoted $25950 whereas the L3200 with the same was $26450. I was wondering if these prices were a little high as they seem to be to me. Also other than the L seeming to be a heavier frame what is the actual difference as the both have the 32 hp...

Anybody come across a hydraulic noise above 1000rpm sounds like fluid being forced through a small hole! All hydraulics seem to work ok. I have changed oil and filter but still same?

I would like everyone to give me their thoughts on which one to buy and why. Any opinions would be appreciated. Both would be 4WD, HST and FEL. Should I get the quick attach FEL? Should I look for one with a live PTO?

This decal was just as shown in the picture when my new tractor was delivered. I'm sure that brush guard can handle my weight. I haven't been able to determine where it really belongs. My WSM doesn't show decals for the loader, so I assume it belongs somewhere on my loader. Anybody know...

The FEL will easily lift the rear end of this tractor off the ground, even with laoded rear tires. I have made a 3PH ballast barrel that weights approximately 1000#. I have tried to lift several pine logs that the FEL would not pick up. If I am running at about 1800-2200 rpms, and I continue...

Hello just joined the sight. Have a Kubota L3200 and just starting to learn about it and use it. Hope to do some modifications after the warranty is up

I have 2 quotes and regional price factors make the actual amount not relevant. The delta is $1818, L3800 over the L3200, both are HST. The only real feature difference I can find is the horse power, and I'm having a hard time knowing if my needs require the extra 5. I'm not sure if 32/25 vs...

I recently purchased a L3200 HST (Oct 2011) 4WD with FEL. It was sorta of used only 1 hour on the clock. I don't know what the owner did for that 1 hour but there were no scratches on anything not even the bottom of the FEL. Gave $16,400 for it which seem to be a decent price for it. Haven't...

Anybody out there able to give me a quick answer as to the difference between an L3200 and L3240? I am offered an L3200 (new) from a dealer for 18,500 - good deal? It has a FEL but nothing else. Thanks in advance - Snoho3

Well since my lift jerk has been fixed,I've actually felt like adding my goodies to my L3200. Added a new Front Guard with weights (weights i made), Stabilizer Kit for the 3pt hitch, and installed a Work light. I included pics of them below... About to put it to work finishing my barn.

I just bought a Kubota L3200 with loader and landpride 5' rotary mower. It makes a loud noise when driving it, I compare the noise to a "hog being killed". Sometimes it goes lower, and then up again. Its been 3 weeks since I have it and only two hours of operation because I do not know if it...

Greetings All, I need to ask other L3200 L38oo owners is they feel their tractor lugs at low RPM. I sold my 7510 and bought a new L3200. The 3200 seems to lug down at 1500-1900 RPM at full forward pedal. If I let off and milk the pedal it seems like the 7510. 1. What RPM are you using? ( I...

I just purchased my L3200 on Friday. But I couldn't help to notice the missing right side fender handle that comes standard on the Grand's... I'm pretty sure it's saving money related, but I don't understand why Kubota would leave it off. I already purchased one that's made to fit a 3240 even...

I need some help to figure out what the 31.6x16 means on my turfs on the L3200. The reason I ask is that I am tryingto get some chains that fit. Is this an 'inches or metric" number. Has anybody chained the rears on an L3200 or L3800??? Thanks for the help and enlightenment ! Cheers, RD

ive had an L3200 for a about 3or4 months now and love it only thing i can see it needs is some rear weight ballast any recommendations on this and are there any issues with it that i might need to keep any eye out for??

I sat on an L3200 today and while there is a slot for the cruise conrol lever, there is no lever. Did the dealer not install it or is it an option now?

I currently own a JD 2520. I want/need something larger. While the 2520 has been a great unit, when I cut on my hillsides I feel like the tail's wagging the dog so to speak. My main uses are field cutting with rotary cutter and using the loader for projects, and snow removal.I have a WHIP...

I'm in the market for one of these tractors, but can't decide. I like the PTO in the 3400, but I see the 3800 replaced it. So I guess the 3400 is obsolete now. I can get either one from my dealer. The prices are within 1200.00 of each. Any suggestions?

New member from Maine to this site. I've been on before as a guest, so I thought I'd become a member! I always have questions and sometimes answers.These forums are great. Thanks

I just bought a new L3200. This is my first tractor minus a 10HP john deer lawn tractor. Is the owner's manual serious about babying this thing for 50 hours? What can and can't do? Thanks Joe

Newbie here. Just a simple question. I have been pricing tractor/FEL/BH from the B2620 up to the lower L series. With the combination of cash and rebates, the local dealer gave me a quote of $21,437 for an L3200 (new) with FEL and BH77 with bucket, including delivery. I'm a bit stunned...

So I think I have narrowed down my choices to one of these two tractors. I currently have 3.5 acres that I need to complete some landscaping on before putting it up for sale and just purchased 2.7 treed acres to build a house on. The new lot will need tree removal, finally grading, driveway prep...

Am about to take delivery of new L3800. I know this is a new model and haven't seen many posts about it yet. Any owners out there care to enlighten me about what to expect (good and bad).

Hi Guys ; Took delivery of new L3200. Checked everything on delivery except 3 point. Went to use it today and it will go down but not up. However if you roll the bucket (left) the 3 point goes up perfectly. It would seem that the assembly blocked a circuit in the 3 point hydraulic...

Tractor only has 27.6 hours on it. Have had starter problmes several times in the past 6 weeks. Turn the key, wait, turn to start position and hear a "click". But starter won't engage. Repaeast several times and it will start. This morning I hook up to a 6000# + blat and pull it out from...

Hey Guys; I have sold my 7510 and am taking delivery of an L3200 this week. I need info on the wheel spacers that are available. I believe they will be exactly the same as the L2800. Does anyone have pics/part number or experience. I need chains that is the reason. It is new so I am...

My husband and I have been looking at buying a new tractor for our 8 acre horse farm and have pretty much decided on the Kubota L3200 HST 4WD. We mostly want it for moving small (4' x 4') round bales, mowing pastures, etc. so we want it with a FEL with quick attach, a hay spear and a rotary...

Is the position control feature in the L series worth the price bump from the B2920? Using the machine to mow and move stuff around on 11 acres with some hills. I also see the B2630 has the position control and indep PTO the others have a live PTO. Any help with the indep vs live PTO issues...

I had to replace the transmission sight glass (plastic) on my L2800 so I went by the dealer. They had a tractor they were running a special on. It was an L3200. It's a new model replacing the L2800 and the L3400 based on what the salesman told me. Every thing is exactly the same except the 32...

Havent heard to much on the L3200, interested in the model was wondering if there are any owners out there yet? :cool:

Did anyone that purchased a L2800 or L3200 consider a John Deere 3032E? I'm finding the John Deere to be $1000+ less, which I did not expect. Do you think the 3032E is a comparable model to the L3200? I would be getting a FEL with the tractor.

I'm looking into a new tractor (first time owner) and considering the L2800 and L3200 (4WD HST for both). Is there a summary of the differences between these two models? I have read the specifications, and they seem very similar. If they were the same price, would you pick the L2800 or L3200? At...

I was wondering if anybody in the Ne has purchased an L3200 with loader. My local dealer does not have one and getting a price from them is difficult. Has anyone had dealings with Ahearn in MA ? I am in CT but the service around me is dreadful. Thanks to all that reply. In the meantime...

Thought some of you guys might enjoy a video on the features of the new Kubota L3200 and L3800. It compares it to the older L3400 and the John Deere 3038E. Enjoy. All New Kubota Standard L-Series | L3200/L3800

Looking at these two units have yet to see them in person.. Can anybody tell me the main differences between the two? Anybody own any of these? What are your thoughts? Thanks for all the replies

Has anbody bought one of these that would be willing to share pricing. I have been looking at the new L3200 or old L2800 with a loader only. Thanks, RD

Has anyone gone this way and wished they had not. I like the looks of the L3200/3800 and wonder if I would be happy with the switch or wish I had kept the B3200 for its size. I like the idea of a little more tractor plus more loader but I do like the maneuverability of the B. Ideas, experience...

I went by the Kubota dealer and was kicking the tires, The L3200 and L3400 tractors had my attention. I am thinking of replacing my trusty B8200 gear shift with a new HST that has power steering. The first thing that i noticed is that the L3200 was very spartan, but that was fine. The dealer...

Hey Yall, Just got back into Louisiana for the Holidays. While looking around for a B2920 TLB package, I notice, that there are a lot of the New L3200/L3800's at the dealers, but it looks like most are gear model, and they only have a hand handle on the left side fender. There are two types of...

Thanks to all for posting your thoughts and opinions. I have been a quiet lurker for a short time while trying to figure out what to purchase. After a short debate between the L2800 and L3400 (HST), I ordered a new L3200 HST with LA524 FEL (quick attach & pallet forks) and BH77 backhoe. The...