kubota l355

I am looking to see if there are any metal shavings in the transmission of a kubota L355SS. Any pictures of the location would help. Thanks

What are the common problems for this type of tractor not going in reverse. Drives forward and pushes dirt around but no reverse. Look for help with a picture of the part that might be need to for replacement.

I have an older L355ss that will not lift the three point with out aggressive throttle once at operating temp, sometimes it barely moves. When cold it lifts with minimal throttle. Thoughts? Worn piston/seals?

Knuckle seals are belching 90w, will need to replace soon, after garden is in. Where do you folks get your parts online that you trust? For what it's worth, I'm located in the Pacific NW.

When in low range, a rapid clacking noise from rear differential, very quiet or absent in 1st low, but louder in 2nd low, louder still in 3rd low, and very noisy in 4th low. The diff lock foot lever flops up an down, doesn't seem to either engage or disengage solidly, not sure if that has...

My L355 is a four wheel drive model. As such, the front wheel hubs attach to the stationary front axle tube at a square flange with four bolts and two nuts on studs. I am trying to remove the entire hub assembly in order to fix an oil leak at the steering pivot point. It looks to me the only way...

So, I'm back with more 4wd issues with my Kubota L355SS. It'll shift into 4wd, but then it just grinds. It appears to be coming fromt he front axle. The front left in particular sounds nasty when spinning it by hand. I think I have 2 overall issues: 1. The front axle pivot pin was worn...

Since I bought my tractor a few months ago, it has seemed on occasion that he 4wd does not engage easily/fully. After using it quite a bit this weekend, its not engaging at all. My land is way too steep for 2wd. So, after reading quite a few posts on here I've come up with the following: 1...

The draft control linkage on my Kubota L355SS is partially missing. The end of the linkage at the draft control valve is present, but the other end does not connect to anything. The parts diagrams don't really show where it connects to. I have a feeling that my draft control valve is also...

I Love my new (to me) Kubota L355SS. I did notice however that there is a mesh screen on the supply line to the hydraulic pump & that's it. Is it worth it to install a spin-on filter on a return line?

Howdy folks, I blew a hydraulic hose on my bucket drive which caused a bunch of issues. I replaced the hose, refilled the hydraulic reservoirs and bled all the air out of the system. My three point hitch and my bucket cylinders all function perfectly. The other issue is now with the...

I'm working on my old kubota. Where is the best place to order parts for it?

does anyone know the lenght of this tractor w/loader?

I saw an ad for a 30hp shuttle shift 4WD Kubota in the paper this morning for $3500. I thought it was surely a misprint but I called anyway. No misprint! The guy told me it was an L295. I went and looked at it and thought "Wow this thing is big for a 30hp". It has a few minor issues that...