kubota m9960

The Kubota technician read the ECM and said I need to replace the Exhaust Gas Temp Sensor 0 (zero), Black. The Kubota parts site says it is Sensor (Thermo,0) Black; 1J500-18500. I think I can order one online and do it myself. Can I expect the check engine light to then go off, tractor be able...

Hello all, purchased at auction the 2014 Kubota M9960 and looking for a loader. Did some preliminary research but it's outdated info. Suggestions are greatly appreciated. Best, Chris, Long Island, New York

Hi guys, In the fall I bought a Kubota M9960 off an auction. It has 18.4x28 tires on it the rear, but I would like to put narrower tires and rims on it. I would like to put 15.5x38 tires on it with a spacing of about 72'' on center of the tread. I was wondering if you guys have either done this...

My local CaseIH dealer has a Kubota M9960 with loader sitting on their lot. I haven't drove it or played around with it yet. I just wanted to get some input from you guys as to the quality on these bigger kubota tractors. Any known issues or concerns I should have? Its a 2013 with 1500 hours...

Here's the story. I bought a 2013 Kubota M9960 with 870 hours (4x4, open station, 12x12 with wet clutch, grapple installed) for $32K plus shipping. Upon receipt I hooked it up to a batwing and it was unable to run it. I purchased out of state, so the out of state dealer arranged for it to be...

I just backed up and broke the threaded piece of the left hand leveling assembly on the 3pt hitch. It looks like it's Kubota part number 3C081-91470 But it's $200 and I was hoping to get one today. Anyone know if I there is an aftermarket compatible piece out there? Hoping it's a pretty...

I'm finally getting around to replacing the Woods BB840X 7' mounted cutter that I have been using with my M9960 ROPS that I bought about 2 years ago. Ground is clean and most of the areas where I will use the BW are not steep but there are some areas where I can allow a BW to ride along a...

is there an upgrade to give this loader more power ?

The two year warranty on my M9960 ROPS will expire in about 6 weeks. The tractor has less than 50 yours on it so is not broken in. I've noticed that the transmission howls upon starting under load, e. g., uphill, etc., until the tractor builds speed. It does so whether the start is a reversal...

We purchased the M9960 and the LA1353 loader back in February of this year. From the start of use, we have had problems with the ball joints under the loader lever all the way down to where the cables go underneath to the hydraulics. I have had the dealer service department out I think 6 times...

I was wandering if anybody else has a Kubota M9960 and noticed that it rides rough. My current 2014 M9960 with cab and rear weights is the roughest tractor I have ever drive. Could it be my tractor or is it a Kubota problem. I am comparing the ride to the M9540 and L3800 I currently own. Me and...

New guy here. I'm Canadian and was wondering if $63000 was a decent price for a 2014 M9960 with a M36 self leveling loader and a 24 speed transmission, radial tires and cast centers in the rear, and 2 remotes? Is this tractor going to hold out on the farm? General yard maintenance and some Pto...

Perhaps I've placed my questions in the wrong thread but my list of questions is here: http://www.tractorbynet.com/forums/buying-pricing-comparisons/314617-some-tractors-options.html#post3800661 Thanks for your help guys!

Guys, I'm getting these quotes from the local dealer in Ontario, Canada. All are 0% 60 months Kubota's financing M7060 (cab, 12 speed, radio, AC, front/rear wiper, rear defrost + M26 self-leveling loader) - $47,227 + $9,993 M8560 (fender kit, cab, 12 speed, radio, AC, front/rear wiper, rear...

I have been reading over the information on Kubotas Grand L6060 as well as M9960. Now the L6060 base price is within a few thousand dollars. The L6060 is 60Hp and the M9960 is 100hp. I am just wondering what makes the L6060 so expensive compared to the M9960 which has considerably more hp. Which...

Didn't even know there was a '60' series yet. Anyone have any experience with the new ones. I'm thinking now might be the time to buy the "leftover" M9540 my dealer has. Just looking at the two tractors, I couldn't see any differences other than the numbers. Didn't have time to talk to my dealer.

Well I have been without a tractor for some time now and I finally jumped in head first into a new M9960 with a Land Pride RCF 3610 shredder. I took delivery Friday afternoon so Friday morning I shreded around the house. What usually took 8 hours with a 6' shredder, I did in 4 hours with the...

I was looking at Kubota's Canadian web site and saw the new m9960 has as a option a 540/540E pto. I assume they will offer this in the USA? Also what are the drawbacks to the tier4 engines? I kinda like the idea of better fuel economy and with all that muffler they might be more quiet. Anyone...

I did a search on here and didn't see a thread started about these new tractors but does anyone have a clue when these two new models might be available for sale? It appears that the M8560 and M9960 will be a little more beefier than the M8540 and M9540 that they are replacing so I'm intrigued...