land pride

By blade is shot the weld at the pivot point where you switch from right to left has a broken weld. This blade maybe has 2-3 hours of use. It is setting on a concrete pad and the weld has let loose. Too bad it is about 10years old maybe 15 years old. Anyone else have this happen or just me.

Land Pride specs state that all of their FDR16 series mowers (48", 60", and 72") have a HP range of 15HP - 40HP. Most other manufacturers, including Woods and Bush Hog, state that the minimum for their 72" mowers is 20HP or more. I want to pull the trigger on a FDR1672 for my Kioti CX2510...

Just getting ready to replace the cutting blades on the RIGHT side of the rotary cutter and realized that the two cutter spindles move in opposite direction to each other, thus balancing the machine. So when replacing the blades on the right side, are the two bolts a standard left hand thread...

I have a land pride rotary cutter that I am having trouble finding a gear box for. I am unsure of the model but the serial number is 879470. All the gear boxes I have bought the output shaft is to short. I had tto cut the old output shaft and stump jumper off so can't get a measurement of the...

My Tractor is a Kubota L5030 and shredder is a Land Pride RCF 2060. My problem is with the lifting straps on the shredder (I guess that's what you call them-they are two steel straps that extend from the area of the top link to the frame on either side of the shredder gearbox. My problem is...

I am using my new 7' dual spindle RCD1884 to mow springtime fescue pastures. I'm just not getting a smooth, even cut. It's leaving a swatch of partially cut grass in between where the two cutters meet. Has anyone had this problem, and how did you remedy it? I have a 40hp Kubota, running 2500...

I bought a used Land Pride FM2160 flail mower and it's time for new blades. It uses a scooped "duckfoot" blade when I'd prefer something like a Mott/Maletti style rock blade (two Y knives hanging from a swinging D-ring) but the dealer says there's only that one option available. Has anybody...

Hello! new member here TLDR: I am looking to buy a new cutter and need to decide between the Land Pride RCR1872 vs RCF2772. I have been using a b2710 with a BH 60" finishing mower to maintain my property for the bast 20 years or so. I have around 100 acres of land both pasture and wooded. I...

Hi everyone! I’m currently weighing my options between the Woods and LandPride finish mowers and could use some advice. I’ve heard great things about both brands, but I’m trying to figure out which offers the best performance and value for my needs. Woods mowers seem robust and reliable, while...

I've been casually watching tillers on marketplace for a while now. A tiller is the one remaining implement that I would like to have around here. A few implements were left here on the property when we purchased it and I've added Land Pride implements to fill in the gaps. I'm generally happy...

Has anyone used the land pride MPS26 series seeders, im wanting one to plant rye grass over my pasture land in the fall. Do they work for this or does the pasture have to be grazed or mowed down real short. Will the Grass clog it up in any way. I know Brillion makes one that is similar, is it...

I have a Kubota L3560 and a Land Pride RFC2072 rotary cutter. Last year I had it mounted directly to my three-point hitch but this year I'm attempting to use the quick hitch that came with my Big Tool Rack. The default pins on the cutter are (I believe) Category 1. I've added some shims /...

Leaving a section of grass uncut in the middle of swath. Any suggestions?

I’m looking at a couple used practically new 5’ rotary cutters. Any thoughts between the Landpride RCR1260 and the 1025 Ironcraft. The Ironcraft looks beefier as far as the frame goes. also had my eye on a 5’ badboy but it’s brand new and is several hundred more. Looks awesome though.

Will Land Pride pd10 post hole digger work on Kioti ck2610/20 with a 7" extension. I am wondering if pd10 is a good match for ck2620 or if I should buy something else. I'd like to get the land pride pd10 with 7 inch extension because I found a used one for a good price. Pd10 comes with a 30"...

Will a Land Pride flail mower FM2572 be too much for a Kubota L3130 with 25.8 HP at the PTO? One dealer said don’t do it, tractor can’t handle the heavy duty LP model. My local dealer said it’s no problem, will work just fine. I’d really like a six foot. Would a medium duty six foot model be any...