mahindra 4110

Hello. I am trying to separate the transmission from the spacer transmission but it will not separate. How do I force the threebond gasket maker to release? Thanks.

Second problem this spring: My clutch isn't functioning smoothly/properly. I am having trouble getting into gears and switching from forward to reverse, etc. The machine is a 2004 Mahindra 4110 with about 500 hours showing on it. And yes, I am probably guilty of riding the clutch too often at...

Looking for a brand of backhoe still selling subframes for a 4110. Also has anyone tried to find a TYM or Kioti subframe that would fit? I know the frame is tym and the engine is Daedong (kioti).

Made quite a mess on my garage floor, the result of a leaking fuel filter or possibly a leak in one of the connected fuel lines... can't tell for certain yet. Can someone please explain to me the filter connections and positioning of the attached valve so I can start to trouble-shoot this leak...

I am seeking lifters, push rods, and a rocker arm assembly with bolts for the Daedong 4A200 4 cylinder diesel engine in my 4110 tractor? The parts can be used or new. I have called a number of tractor salvage yards with no luck so far. New parts from Mahindra were out of my pay scale.

Hi, I’ve got a mahindra 4110. I’ve had it for years and literally never used the PTO. I’ve moved to a new property and bought a brush hog for it, but I can’t get the PTO to turn on. It blows the PTO fuse as soon as I turn the engine on. I’ve searched the problem on the site and it seems a...

My HSU steering control unit leaking can't be fix Orbitrol model #UBS120B08AWD Mahindra #16004072100 or 14484073100. Mahindra want $1,100 I know they make aftermarket for about $400 but can't fine one. Can't find anything on Orbitrol model since its an 03 model figure they have change the model...

Mahindra 4110

Hi, I've got a mahindra 4110 (Engine:41 hp PTO (claimed):33.6 hp). I was told by a local salesman that it wouldn't be powerful enough to cut and bale hay. Is anyone out there haying with a comparable tractor and if so, what equipment are you using? I need to hay about 30-50 acres. Buying a new...

Tractor died, changed filter , will not fire even with ether. Turns over fine.

Good afternoon, Hope everyone is having a great afternoon. Got a question. I'm still learning about this tractor. I bought a 3pt log splitter this week. Hooked it up to the tractor at the remotes at the rear of the tractor. The only way I can get the is to splitter to run is to actuate...

Does anyone know why the Mahindra 4110 front metal pivot does not have a grease fitting? Anyone here with a Mahindra tractor 4110 or 3510 new sheet metal? Could you check your pivot and see if there is a grease fitting. thanks

I purchased my 4110 in 2005, and decided to give a long term review. Not heavy use, almost 600 hrs. 4wd w/ front end loader. Overall happy, 16 years and it it still fires up and gets the job done. The first problem I had was a loose connection electrical above the clutch petal. Caused...

Good Afternoon, First to introduce myself I'm Herman. I just retired out of the US Air Force after a 27 year career. I have moved home to East Texas and I'm working with my father in laws 4110. He has a Mahinda 4110 that he purchased in 2002. It has a Kansas Machine Works FIL. I wanted to...

Changed fuel filter flushed line started and ran good after 15 to 20 minutes and lost power and slowed down and only run couple minutes filter looked OK . pulled filter apart drained fuel and put back on. Started up run good for about 1/2 acer of cutting then started shutting down . 'm...

I recently installed a hydraulic top link on my 2006 Mahindra. Unfortunately, I am unable to adjust it without stopping the tractor, standing up, turning around and trying to force the control arm around the seatbelt buckle. I would hate to have to remove the seatbelt, but that seems to be the...

I have a 2004 Mahindra and as of yesterday it won't start. If i turn the key i hear a relay chatter ( i think either the signal light one or another one beside that. If I turn on glow plugs a relay by the horn chatters. I looked at the ground and battery connections. everything looks ok. I am...

im looking at buying a mahindra 4110 with the ml112 loader, are worn pins a big deal to replace? ,and also where is the best place to buy loader pins to fit,Thanks.

I just had the clutch in my Mahindra 4110 replaced last fall. I used the tractor for mowing for about one hour. It died and the battery was weak, so I tried to pull start it. After one or two attempts to pull start - it suddenly had no clutch pedal (loose - no tension). I thought maybe the...

This problem actually started last fall and I messed with it for a little bit, then more or less put the tractor up for the winter and forgot about it until now. So here goes... While using the tractor to carry some brush and trees on the front end loader, I noticed there was a rubber hose...

Need your help. I have had the dealer change it before but I have moved away and need to do it myself. How does the bowl come off, do I uncrew the top ring or does the bowl unscrew from the ring...thanks for your help

The left side engine grille sheet metal panel fell off my 4110 and got chewed-up in my bushwacker mower. I am looking for any kind of replacement. New or used in any usable condition. Would panel from a 3510 fit good enough?

I found two tractors I'm going to look at and wanted some advise I found a 3940 hst Montana with 600 hours for 7000, and a 4110 Mahindra with a thousand hours for 9000 with blade and brush cutter both 4wd both with loader I have never dealt with either brand but think parts availability will be...

Hello everyone! I'm hoping to have some good luck on this forum. I have a 2006 Mahindra 4110 (4 cylinder diesel). I had the number two cylinder bearing go bad and ruin the journal on the crank. Machine shop says they can turn it but nobody makes oversized bearings for this motor, so I'm left...

I'm back after 8 years away from TBN to ask one very important (to me) question: What size rotary cutter should I buy for my Mahindra 4110? :confused: Here's the whole story: The good wife and I finally bought our retirement property... 6 acres of old, mostly cleared farmland an hour west of...

unless you pull off the rear tire there is no way to get the metal case out-- unless you can take the two bolts that hold the plate in which the metal case is attached. Has anyone tried removing the holding plate? Thanks

Can anyone tell me where you check the gear oil on the Mahindra 4110?

Since the weather has cooled off, I've noticed that I've had trouble getting my Mahindra 4110 to start. The normal start sequence is to turn the ignition key counter clockwise, at which point the light on the dash for the glow plugs should illuminate. Wait for the light to go out and then...

Have a five year old Mahindra 4110 with 1,100 +/- hours. Recently when we were using the Farmi winch, engaging the PTO blew the fuse (which is connected to the ignition as well). We replaced the engage button on the left of the column. Replaced the relay it goes to. Both times we thought we had...

I ordered some parts for my 4110 for my Mahindra. Mahindra dealer PTO gears came with TYM marking on box. If, in fact, I am thinking right, would it be cheaper to order from TYM or Mahindra for parts? Cheers....Coffeeman

Need whole seat. my seat mounting bracket rusted away from mounting on tractor looking for something waterproof and easy on back and kidneys. all suggestions appreciated. You all have a happy Spring.....Coffeeman

I am looking to buy a Mahindra 4110. The problem is that there is a hole on the block at the first Cylinder. Everything else is great int the tractor. The oil and coolant is mixed in together. What is the best repair option for this and what is the cost of the tructor as it is and parts for the...

Hi All, I'm new to the site and appreciate any help you all can offer. Thanks in advance. I have 2002 Mahindra 4110 with about 1500 hours and it threw a rod, I believe. The engine block is clearly cracked. Mahindra dealers are few and far here in Central Virginia (Gordonsville). One opened...

Hello All, I am looking at purchasing a flail mower to run behind our Mahindra 4110 tractor and I have an opinion question. What is the largest size of flail mower you would recommend for this tractor? Granted I understand this is an opinion based question and there are several factors that...

I went to my three closest dealers (JD, Mahindra, Kioti) and told them I could pay max $20K cash for a machine and that I wanted the most tractor / loader I could get for that price. The three tractors I was shown were as follows: Kioti DS4510HS - a 45 hp gear tractor with hyraulic shuttle and...

Which way does the long hub on the clutch disc for a Mahindra 4110 face, toward the flywheel or toward the release bearing?

4wheel drive lever moves but does not engage front axle through transfer case. Has anyone had this issue and is there a shear pin that could be broken?

The plastic fan fell apart(all blades shreaded like paper) after ten years of use...tractor overheated. I ordered a new one and having issues getting it on..Trying to figure out what wrench I can get up in there to get to the 4 bolts...any help would be appreciated

I have a 2004 Mahindra 4110 and it won't go into 1st or 2nd gear. 3rd and 4th work fine. So do the High, Medium, and Low ranges. I was running my roto-tiller when this problem occurred. Everything was working fine. There was no pop or bang, and I didn't run over anything strange. I have...

I am pretty mechanically inclined and have worked on almost every kind of vehicle there is, but i know there are hard learned lessons in every new job you take on. Has anyone done a split and clutch change on a Mahindra 4110 and what were the toughest parts and what things should i not over...

I am using a borrowed Mahindra 4110 which is the same as a TYM 4110 from what I am reading. It is an Ok tractor. This one has a leaking oil seal on the right rear axle and only one wheel brakes, the left rear. It has a geared shuttle transmission. When mowing the owner had issues with it running...

Well, I've been looking to add a tractor to the fleet for a little while, had considered a larger Mahindra, and now I've settled on a 4110. Partly because it's basically the same size as my Kioti DK45 and partly because I found one locally for sale at a reasonable price. I went to go look at...

Several lubricant questions for my Mahindra 4110 newer model diesel 4wd tractor. 1. Is the fill plug for the rear hydraulic and transmission the same? - it appears to be a small 1" diameter flat plug just above the rear axle dipstick. 2. Can I use Tractor Supply Co (TSC) Universal...

Will a Bradco 11HD Backhoe fit my Mahindra 4110? And/or is it heavy enough/too light for the tractor? The used one I'm looking at has a PTO driven hydraulic pump and attaches to a sub frame on a John Deere 5300. Thanx for any advice.

At first glance it seems like that is the case. But, I usually do things the hard way if I don't ask for advice. What is the best way to change all the lines? By the way, I am aware that diesel rubber lines are different than gas rubber lines. At least, I think that's the case. Cheers...

It's about an 02-03. Had water in fuel in June. Got over that. In Sept started dying out again. Checked fuel filter, looked dirty. Pulled out and couldn't find new one. Soooo, I'm a pretty smart guy, I rinsed the old one out with diesel fuel, shook it real good and installed it. (There are...

Have an 04 model and all of the sudden I can't get into mid range, low and high are no problem.. Anyone else experienced this problem? I'm a do-it yourselfer and there are no obstructions on bottom side as the shifter is free... Anyone??

I have a Mahindra 4110 with FEL that is about 6 years old. It has 140 hours on it and has been serviced yearly since I don't put enough time on it to go by the hourly recommendation. When I cranked it this morning to load it on the trailer the loader jerks when moving up and tilting the bucket...

I have a Mahindra 4110 with FEL that is about 6 years old. It has 140 hours on it and has been serviced yearly since I don't put enough time on it to go by the hourly recommendation. When I cranked it this morning to load it on the trailer the loader jerks when moving up and tilting the bucket...

I have a mahindra 4110 and have already rebuild the front Diff. and now there is a poping and snapping noise when I move the 4WD lever to 4WD, this time it appears to be in the Trans., just wondering if anyone else has had this problem and what exactly it is and how much the repairs were, I...

FYI for anybody that might be interested in running the Tractor Supply Co. Countyline 3pt hitch log splitter with a Mahindra 4110 (and possibly other models). I paid $750 for the splitter and about $100 for 2 hoses & 2 male hydraulic plugs. TSC has the 1/2" hydr lines in the length you'll need...

I bought a 3pt hitch log splitter to run behind my 4110, but neither I nor the dealer near me can find the male hydraulic hookups that fit the 4110 female couplers in the back of the tractor. The log splitter has 1/2 hose with male threads so I need to go from that to a male quick coupler that...

My mahindra 4110 overheats after 30 minutes of brushhogging. I have cleaned radiator and screens and have cleaned out both air filters all fluids are good. It still overheats quite quickly even on cool days. ( Temps in the 75 F range) . Has anybody looked into the poor placement of the...

I have a 2003 Mahindra 4110 with about 850 hours on it. I've owned it since new and the hours have been easy, mostly field mowing. I have a question concerning the clutch. While field mowing, I went to back up into some tall brush and while releasing the clutch (pedal less than half down) the...

First of all hello, long time follower first time poster. Been an advid visitor since I purchased my Mahindra earlier this year. You guys seem to now your stuff so I hoping yall can help me out. Couple of weeks ago I developed a leaking PTO seal. Did some research and stuff and decided I...

Hey all, Im trying to help a friend get the PTO on his Mahindra 4110 tractor to work. He bough it new about 10 years ago and it only has 358 hrs on it. The PTO stopped working. Indicators say its working but nothing.He is the type of guy (in his 70's) that never lets his tractor set out and...

I just bought a used 4110 and the only problem I have is the tilt steering moves and does not lock in place. The foot leveler is stuck in the down position and I can't even force it up. I have the plastic cover off. I am just wondering if it is worth messing with. I would love to get a eazy fix...

Hi Guys Trouble with the tranmission trying to go into two gears at the same,i took off the side plate and adjusted the gears back to nutural.Before this my son backed up with it and heard a loud popping noise in the tranmission. I put it all back together and drove it very slow,i feel the...

The 4110 is my dad's. He saw me un-curl my bucket & drag dirt backwards with it the other day. My bucket stays put wherever I un-curl it to, including when pushing down very hard & dragging backwards with it. He commented that his bucket (loader?) doesn't stay when he does that ... If he tries...

Hey Ya'll Looking at a new, old stock, Mahindra 4110 w/ FEL for $17,500. Looking for opinions. Thanks, William in Plum Branch, S.C.

Hey Ya'll, New member here, gotten a lot of info from this site and since I'm now thinking seriously of buying a tractor , figured I'd go ahead and join. I live on 10 acres approx. half of which is 8-10" pines grown up with smaller stuff in between ,some of it 2-3". I'd like to clean some of...

This is my first time so I hope this works. I have a 05 mahindra 4110 with about 600 hrs. Lately with the warm weather and working it the rpm starts to jump up and down afew times and then stalls. When I turn it back on the rpms once again jumps up then down, meanwhile I have not pedal responds...

My wife and I are considering the purchase of a new tractor this fall. After some research on line I went to a local dealer that sells Deere, Kubota, and Mahindra to ask some questions. It didn't take long for me to make the assumption that Kubota sales must have a higher commission. Anyway...

I just got a used Mahindra 4110 with the standard loader. Previous owner didn't get the Skid Steer compatible option. I really need a pair of pallet fork to help with my home construction. Am I limited to the clamp-on type forks? Are there any other options? How difficult is it to convert...

Hello, I have looked and googled but I can't find what I am looking for. I am trying to find out what the ground speed of these two tractors is. I am wondering if the 4110 with 12 gears has a slower first gear speed than the 4530 with 8 gears. Or if the low speed is about the same and the...

Any of you guys know what the going price is on a 4110 with FEL and backhoe, all Mahinra stuff. About 3 years old. Very good condition, but not like new.Has a dent on hood, black molding on rear of fenders pulled down, but good overall. Not sure of exact hours, but less than 1,000. Said he was...

Looking for a shop/repair manual for a Mahindra 4110. I have had no luck on the net so far, anyone have any ideas on where to get one?

I am looking at a new 2008 Mahindra 4110 with loader and a set of woods pallet forks,is $20,900 a fair price for this package?Thanks,coobie

I currently own a massey ferg.1240 4X4 28 hp and want to step up to a bigger HP tractor.I have been pricing the Mahindra 4110 with skid steer bucket the price is $20,900 the kubota 3940 grand L with skid steer bucket and glide shift tranny is $21,750.There is not much difference in price...

I currently own a massey ferg.1240 4X4 28hp. and want to step up to bigger HP tractor.I have been pricing the mahindra 4110 with skid steer bucket price is $20,900 the kubota 3940 grand L with skid steer bucket(gilde shift tranny) is $21,750.Not much difference in price IMHO.What would be the...

Now this is a hard one, Mahindra 4110 12 x12 4WD $ 21000 3510 12x12 4WD $ 20900 vs. JD 3520 hydro, 4WD $21900 /37 HP, 30 HP PTO, Hydraulics..8,6gpm, weight 2900 lb./, Both with FEL. IF this is not tempting...

I have a 1999 MF 1250. After looking at multiple pictures of a 4110, it seems like it is just like a MF 1250. The same instrument cluster, same tilt steering wheel, same looking from the rear. Does anybody know if they are the same?

Looking for experience, suggestions or simply a really good kit for adding front auxiliary hydraulics & control valve to my 2004 Mahindra 4110. The initial intent is to add an aftermarket grapple to the existing FEL bucket or simply to buy a new grapple bucket (exact type yet to be determined)...

Just went over to TYM site. Not sure which, but it was the one with 0% interest for selected models. Question; which TYM is the sister to the 4110? One thing interesting over there. I was able to start a download of operators manual for the machine that looks like mine. Mahindra never used to...

Howdy all, I'm about to purchase my first tractor. I'm leaning toward either a used 2002 4500-2WD w/FEL or a used 2002 4110 w/FEL. I'm leaning more toward the 4110 because of the lower weight of the tractor w/ FEL, so I can tow it on my 7000# capacity lowboy trailer. My main use will be...

Hello to all! This is newbie's first tractor. I purchased 55 acres in Tennessee that I will be haying, mowing, and cleanup/clearing. Land terrain is rolling with steep inclines leading down to the creek bottoms. I have narrowed down to purchasing one of these tractors. I just got a quote...

What oil filter are you guys using on the Mahindra 4110. It is about time to change filters/fluids. I don't want to go back to the dealership to get filters. I hope someone has another brand and part # available. Thanks in advance!

Hello everyone, i have a question regarding the pump output on a 4110 Mahindra. It puts out around 9 gallons per minute. I was wondering if there is anything i can do to uprade this? Thank you for your help

I just phoned a dealer that I've been to a couple times and he said that they had a used mahindra with FEL for $14,900. It has a little over 600 hrs on it. I think that is is 2 maybe 3 years old. not sure. phone went dead before he could tell me. sells massey ferguson so he may not know a...

I looked at both these tractors. Looks like either would work for me. The mahindra seemed to have a much smoother engine and somewhat "beefier" build. The kioti has better spec on the hydraulics. Price aside, has anyone compared these two and arrived at specific conclusions? mike

What kind of price should I expect to encounter for a Mahindra 4110 w/FEL and R1 ag tires?

What is a fair price for a new Mahindra 4110, tractor only? I have been quoted a prices from $15825 to $16570. Is those prices in range or do they still have some moving room? Interested in hearing how others did on buying a 4110. Thanks

I would like to add a hydraulic top link to my 3 point hitch, replacing the manual top link. My question is, where can I buy this hydraulic top link? I hope that I can hook it up to the rear remotes, and use the little lever next to the position and draft control levers to operate the top...

Hi Guys, Talked to you earlier about buying this machine. Its a workhorse, but I have my first minor problem. Being a first time tractor owner I need some info. I just bought a Mahindra 4110 with FEL, 4 wd and R4 tires, have been removing a hill from the side of my house and filling in a pond...

First time tractor owner,just bought a used mahindra 4110 with FEL, 4wd and R4 tires, have been removing a hill from the side of my house and filling in a pond with the dirt.have 8 hours doing this and notice the front tire has a small hole and "oozing fluid"? can I plug this tire like a truck...

I have been looking for a CUT for some time, and have just looked at the 4110, is this really as good of a tractor as i think it is, test drove and found it very nice, the engine is daedong, supposedly the same as kubota, so im told, is this tractor really as good as the top 3. I know that it...

Ok folks...I still need more of your endless wisdom. I am looking at a NH TC40 vs. Mahindra 4110 About the same price 18+k w/ FEL the NH is a 03 model...but new and the Mahindra is a 04 model. I am also posting this in the mahindra forum so please give me all your opinions and experiences. NH...

Ok folks...I still need more of your endless wisdom. I am looking at a NH TC40 vs. Mahindra 4110 About the same price 18+k w/ FEL the NH is a 03 model...but new and the Mahindra is a 04 model. I am also posting this in the mahindra forum so please give me all your opinions and experiences...

I'm the new guy, and have some questions. I've been doing a lot of looking around. New tractors are a little more than what I'd like to pay but used ones are so hard to find. I'm wondering what a fair price would be on a 2001 Mahindra 4110 w/ loader 300-600 hrs? Thanks.

Looking at buying a 4110 with a loader. Will this tractor handle round bales of hay in the 800-1000 lb range. Thanks.

I had a problem with the pto on my Mahindra 4110 today and was wondering if anyone else has had any problems. It has been about 2 weeks since I have used the pto and I had some bushhogging I needed to to. I put on my KingCutter 5' cutter and when I tried to turn it on, nothing happened. All the...

mahindra-ML-254631-ML- Moved to Mahindra Forum.

Anybody have experience with dealer cost for 50 hr service? I'm trying to decide whether to do it myself or take it back to the dealer (still quite a few hours to go, just doing some planning!).

mahindra-ML-250503-ML- Moved to Mahindra Forum.

Just bought a new Mahindra 4110 w/FEL, disc, blade and PHD. Since it was delivered late this afternoon to my soon "hopefully" new homestead about 20 mi outside San Antonio, I only got an hour or so before it got dark. I can say this though, it's a very nice tractor...I think I'll really like...

Attached is a pic of my new Mahindra 4110. This is my first new tractor. I had a Ford 4000 gas burner and got all the good out of it I could before I traded it for this. Man I am impressed with this thing. It really has more power than I thought. I have only had it for a couple of weeks so I...