mitsubishi mt372

Can anyone tell me if there is a way to lock the belly mower in the up position and still use the 3 point lift without removing the mower attachment?

Anyone have any idea on what you would need for a hydraulic front plow or rear hydraulics or just a general hydraulic control I don’t know much about hydraulics and I’m not sure where how or what to get to upgrade the hydraulics for my Mitsubishi

Hello this is absolutely my first post on anything that is that is the World Wide Web. Just wanted to put some sort of ad and let you guys know that I’ve got a pretty big inventory of mostly Mitsubishi and satoh NOS parts still in factory packaging. Mostly mt160 mt180 and beaver 1 and 2 but also...

I have one of those old Mitsubishi MT372 tractors and I went to start it one morning and it would not start. I loosened the fuel line nuts going to the injectors and cranked the engine but not a drop of fuel came out. I am thinking maybe the fuel pump died? Does anyone have any idea how to...

Hey fellow mitsubishi mt372 owners! I have searched and searched for all the decals for my mt372. I have finally found someone that makes them. I worked with this individual to get her all the photos from my mt372 decals and I searched for the rest. She did a fantastic job making me oem decals...

Hey y'all! I have had this MT372 for a few years now and couldn't be happier with the way it performs! Since the tractor has been so good to me I have decided to restore it in the very near future. The tractor itself is in excellent mechanical shape. The body and tires on the other hand...

Hey yall! For the second time, I have split my tractor. I thought that my clutch issue and the sound of clanging metal had been resolved when I removed the almost disintegrated piolet bushing and replaced with a new one. However, after putting the tractor back together, I started it up and put...

Friend just bought this tractor and needs a muffler for it. I'm trying to help him find one, searched the web and have found nothing. Anyone know where i can find one or one that will replace this one. What have you done to replace yours?

Every time I put in a new pin then use the grader box or tiller, it snaps again. Never owned a tractor before but I have had official tractor repairman replace two of them as well with the same result!

I have an MT372 early 80s. I've noticed the alternator wiring harness plug is deteriorating away. Doe anyone know where I can purchase a replacement or will I have to buy the whole harness. The plug on the regulator is deteriorating but not as bad. Thanks.

Can anyone tell me if there is supposed to be a spring on or in the hydraulic metal mesh filter that is located on the right lower side of the seat area right in line with the hydraulic raise and lowering lever? And if there is, where can I get one? Thanks for any assistance!

I am having an issue with my hydraulics. The 3pt hitch is locked in the raised position and it will not go down. I have tried everything that I can think of to include: Draining the fluid and checking the filter screen, (is there supposed to be a spring in or on the filter screen? the sticker on...

I am having an issue with my hydraulics. The 3pt hitch is locked in the raised position and it will not go down. I have tried everything that I can think of to include: Draining the fluid and checking the filter screen, (is there supposed to be a spring in or on the filter screen? The sticker on...

I have a 1984 Mitsubishi MT372 and I have just replaced the mule pulley drive belt. When it is engaged, the pulley guards get really hot after just a few minutes of use. I noticed the bar was out of the adjustment area (in between the arrows where it is stamped run). I made an adjustment on the...

I have a 1984 Mitsubishi MT372 and I have just replaced the mule pulley drive belt. When it is engaged, the pulley guards get really hot after just a few minutes of use. I noticed the bar was out of the adjustment area (in between the arrows where it is stamped run). I made an adjustment on...

Hello I'm new here, hope I can find help. I found Diesel in crank case. both cylinders were trying to fire, so I think I can rule out a a busted cylinder. will fuel pump let fuel pass into block?

I'm considering purchasing a Mitsubishi MT372 Lawn tractor to do food plot maintenance on my hunting lease. The biggest reason for purchansing the tractor would be to disk up the plots using a disk harrow. In looking at the service manual for the tractor I noticed that it is a front wheel drive...

I'm considering purchasing a Mitsubishi MT372 Lawn tractor to do food plot maintenance on my hunting lease. The biggest reason for purchansing the tractor would be to disk up the plots using a disk harrow. In looking at the service manual for the tractor I noticed that it is a front wheel...

I need help I cannot get the tractor to fire, it will turn over and I can get a very small amount of grey or white smoke to puff barely out of the muffler after trying and trying several times to get the tractor to fire. It started it about 6-7 months ago after running for a good solid day then...

Where can I get clutch parts for my MT372. Can I get a complete kit? or buy parts separately? I'm restoring this tractor and will need other parts. Is there anyone who can provide me with a price, and available parts list before I split my tractor this weekend? I called my local tractor dealer...

Guy down the road got one for sale. Before I enquire about it I have a couple questions. From the factory:1- Does the PTO run backwards? 2-did it come w/Cat-0-or Cat-1 3PH? I've found most all the other info on web,but conflict info on these 2 questions,set-me straight.

I think I may now have experienced my 1st major problem with my Mitsubishi MT372. I started the tractor the other day (it had been left in neutral when last parked) and when I went to put it in gear I realized the clutch pedal was already in its depressed position. I can no longer put it in...

Is there anyone who can tell me how the hydralics on the MY372 works? The lift quits after the tractor has been running awhile. Maybe it is low on hydralic oil. How do you check the hydralic fluid level and where is the fill hole? Thanks, David40