pedal

Hi, new member and owner of a Boomer 8N, I am looking if someone could post a picture of their routing of the throttle cable under the throttle pedal. When I bought mine I found the cable end was broken. There is no illustration in the maintenance manual showing routing, the parts catalog...

The rocker pedal on my CK30 HST has begun rebounding slowly. I have greased the zerk, cleaned the rod and oiled the linkage. It is a 2012 with 2660 hours. Suggestions

Good day; Edit: I was so sure it was going to be something complex that I neglected to check the simple stuff first. Turns out a blown fuse was the problem. Lesson learned! NH TC30 won't turn over. New battery. Cranked briefly (maybe a second) when I went to start it earlier, today, then...

Hello! I have a Deutz-fahr 4070E tractor. My clutch pedal spring broke so now i don't know where it attaches on the pedal side. I can see the hole on the chassis side(the static one). I need the diagram so i can attach it without removing the whole fuel tank! Thank you!

MX5800 starts fine. Can be standing next to it or sitting on seat to start it. As soon as you rock the pedal to go forward or reverse, the engine cuts out. It will also quit when you turn on the PTO. Always restarts just fine. We've thrown a seat sensor at it and the pedal sensor found up...

I have a 2022 X370 and I was hoping to convert the forward/reverse foot pedal control to a hand control. I’ve read some articles but my linkage seems to be a little different. I haven’t made anything up yet but the few times I’ve had an idea for mounting a rod or lever on my pedal, the break...

Is there a best "easy" way to replace the clutch pedal return spring on a 2005 NH TC29DA tractor?

TC33D NOT HST(1999-2001). My clutch pedal will press to the floor without disengaging and with little to no resistance. Trying to find a parts diagram so I can see what is what. I know I have a broken return spring for the pedal, but with the pedal NOT disengaging when depressed, my best guess...

Hello, Does anybody know how to replace the external Clutch Pedal Spring on a Ford 3600? Part# C7NN7N98A

I've a Kubota B7800 and never owned or operated any other tractor. In maneuvering the tractor recently to disassemble and (later) reassemble my Dirty Hands Brand Log Splitter (lifting of the heavy cylinder (w/o detaching the hydraulic hoses), then lifting off the I-Beam Splitter Post(?) and...

My accelerator boost pedal on a TC29D is not working, no change in the engine RPMs when stepping on it. Any assistance on causes and repairs is greatly appreciated, thanks.

Out of curiosity I'm interested in owners opinions of the 'Treadle Pedal'. I bought a used Kubota F series front mount diesel powered, hydrostat drive that has the Treadle Pedal and never having one or at least not for many years because the last hydrostat tractor I owned was a 5030 HSTC and I...

22 Kioti CK 2610se HST cab 650hrs Pedals have been sticking forward and reverse for several months. I’ve been under there looking for any issue but couldn’t find anything. Yesterday both pedals dropped to the floor and I noticed the linkage was off. One of the pins appeared to shear off so I...

B7800 hydrostatic pedal wants to stick in the go ahead position. Is there a spring that pulls it back? I also greased the fitting on the pedal pivot. Edit, I see a dapner on the parts diagrahm, think thats the problem.

NX 5510 HST, I was using the linked pedal option all the time and liked it. It no longer works. Can anyone help me with how to fix it?

I can't tell you just how much I hate JD engineers. I busted the power steering line at the cylinder on my tractor. There is a flexible hose that goes from the cylinder to the hard hydraulic line that is about 18 inches long. Removing it from the cylinder is easy. Removing it from the hard...

It suddenly happened where pressing the pedal stopped the engine. The seat switch was bypassed a long time ago and worked fine. I found that tapping the brake pedals solved the problem. Does anyone know what that brake switch is for? if I lock the brake pedals, and press the HST it tries to go...

All of a sudden my fwd pedal on my RK21 is real hard to operate and sticks, reverse works fine has anyone had this issue

I have an RK 37 H tractor and I cut grass in about two acres yesterday. As I was putting the tractor away I noticed I had an “F pedal check” notification. What exactly does that mean and is it something I can do myself?

On a NH Ford 445C, how to adjust clutch with an electric foot pedal?

Hello I am trying to fix a "PTO popping out of gear" issue whereby the PTO will stop spinning as the lever kicks back to "off" If I hold the PTO lever down it will stay engaged, but I can't seem to adjust the lever detents so that they will hold. I am about to remove the linkage housing so I...

Adjusted freeplay on my kioti ck30 clutch pedal to an 1” of freeplay , now when I press clutch it feels like a second engagement about an 1”from the floor , tractor goes in gear alright and when I release pedal , seems like it engages in gear at the 1” from floor and goes ahead , more aggressive...

I have a kubota B1750 HST 650 hours. The only problem I have with it is that the hydrostat pedal is hard to move. Also when I press it to go forward and then let off of it, it does not return back to "neutral". It also does the same in reverse. I have greased the zerk on the pedal itself and...