safety switch

My DR Brush Mower Neutral Safety Switch wire connection was knocked off. Mower wouldnt crank wouldnt do anything. I troubleshot the ignition etc. before realizing the problem simple fix right!! Reattached wire harness to safety switch, engine cranks but wont turn over!! Like its not getting...

On a zg222 it looks really difficult to change this brake safety switch. Anybody have any tips? Thanks in advance

Got a Massy 35 the safety switch wires have fallen apart. I went to replace them but they have odd pin connectors that connect to the safety switch. Does anyone know where I can buy them or if there is an easy fix?

Helping a friend with this machine, no start. Finally figured out the more complicated than necessary neutral safety switch is the culprit. Is it acceptable to bypass the switch on a hydrostatic model? Thanks in advance.

I just acquired a 335 and one odd thing I discovered is that when you hit the reverse pedal, the pto shuts off. Was told this is a safety feature. I have never known this before but I am certainly looking for a way to change this feature as I mow in reverse sometimes. Any advice appreciated.

I bought a new MX5400 in '22, and I am almost ready to completely disable the seat safety switch. It entirely too sensitive, and and just about any change in position on the seat will shut the tractor down. I'm 170lbs, and its aggravating trying to run/watch any implement behind you without...

New to forum but have 2 Kubota B Tractors (84 and 94 ish???) the newer one has a fork that activates the safety switch for the starter lockout from the PTO and the fork that activates it keeps popping out. After replacing it and then losing the new one, I got smart and added a spring pin to the...

Hi there, I am trying to help my landlord to get his tractor functioning properly. It was started by hot wiring in the past and I am trying to get it back to starting with a key. I believe the clutch safety was bypassed but am not able to locate it. Can anyone point me in the right direction to...

The clutch safety switch needs replacing on my Max 26XL. It looks impossible to get at. Has anyone changed this switch that can offer suggestions on how to get to it? Appreciate any help here.