series

At 90 hours on my F2690, I had the first minor issue. I have the 72" rear discharge deck and I noticed one of the front deck gauge wheels wasn't running true. I knew I hadn't hit anything hard enough to damage it and the problem was 3 of the 4 nuts holding the two wheel halves together on the...

Hello Could someone post the DK series reset sequence for HST range selections? I believe it is in the shop manual. Thanks

I am have what I assume is cavitation in my hydraulic system. The hydraulic oil shows many small air bubbles on the dipstick. When I start up my machine and lift the FEL it will start to raise then pause then lifts. I assume air in the cylinders going through the system. Kioti recently released...

Has anyone replaced the non-tilt steering column with a tilt steering column on a current production JD 3E series tractor? If so, do you have a parts list and approximate cost? Alternatively, has anyone fabricated a bracket to allow the seat to slide rearward a couple more inches? The fuel tank...

Have been doing a ton of research regarding f series vs zero turns. Right now mowing with a John Deere 770 with 86” finish mower. I have about 5-6 acres to mow. I’ve been leaning towards a f series because of its versatility. But I read that they are slow and rough compared to a zd zero turn...

Looking for an used excavator, I want to avoid as much as possible emissions technology. Could someone please explain kx 91-3, Kx 121-3, kx91-4, kx121-4 emissions technology as opposed to kx033. I know kx040 has def so that is out. Thank you

I see several late model, low hour 5065-5075 John Deere tractors for sale. Is there a problem with these tractors or? Thanks!

Anybody have one of these or know how they are performing as well as any problems. They look the part and have some great features.

Just saw an AGT mini-x on the Gold Rush Mine Rescue series. At the very end of season 4 episode 4 there were pictures showing what looks like probably a little 1 ton gas unit feeding a little trommel. First time I've seen one in use for something other than just homeowner or farm use. Will...

Any insight, experience or opinion as to where the new SM series fits in with the YM and YT models? I can't find dimensions on the 37hp (?) SM model fits in.

Yes we are looking at 4 series JD tractor. What might be a good trailer length for that with its loader? Been looking at 16 and 18's feet long.

Hi all, Chasing what the left hand side headlamp part number would be for a kioti rx 7620 to source a replacement headlamp housing.

I have a 2023 Workmaster 120 and am not impressed with the radio. I cannot see the display, ever, regardless of how bright the intensity is. Is there a better quality radio available for these? I assume they are a standard automotive form factor and any unit of similar impedance/wattage would...

As you can see from my profile pic, I overhauled my Zetor. The hood was rotten, so I junked that and managed to get an other one. The hood itself fits perfectly, but I should have checked the hinges and the transverse stays before throwing the old one away; it shows that on the new hood those...

Has anyone used the land pride MPS26 series seeders, im wanting one to plant rye grass over my pasture land in the fall. Do they work for this or does the pasture have to be grazed or mowed down real short. Will the Grass clog it up in any way. I know Brillion makes one that is similar, is it...

I'm wondering if anyone has experimented (or even considered experimenting) with leaving the brake piston retractors out of the brake pistons on any of these tractors? Having been into a few tractors for brake problems and knowing there have been questions about the effectiveness of them I've...

My dad is looking to buy a new or somewhat new tractor with loader and cab, this really wasn't in the plans at this moment but had a tractor catch fire so need to do something, still waiting on insurance, pretty sure will be a total loss. Was looking at the new 5m series, specifically the 5120...

Wanted please, Steering box for TX21** series, probably the same as many other models. Can anyone help please, or links to someone who may be able to help? I'm on the Herefordshire/Gloucestershire boarder UK. Thanks in advance to @everyone. :)

Can anyone tell me if a bagger off a B2023 will fit on a BX23s? Grass catcher is gck60-76ba and mower is rck54-23bx. Found a great deal on a used one and wonder if it’s close enough? Thank you.

I am very interested in a Mahindra 1126 with loader and 60" mid mount mower. I am told that the Emax and Max series has been discontinued. I went looking to possibly buy an Emax 20s. It did not make me happy because of the rocker pedal for the HST. My right ankle is not flexible. My gut size...

Hello this question has been asked a million different times but a lot of them are conflicting - what is the latest advice on what fluids to use? In particular, my tractor has two pumps, one for the steering and one for the loader etc. Should I use an ISO 46 in the steering and a UTTF in the...

I owned a RX6010 cab and had the clutch cable break at 215 hours. Since it shut me down for 10 days, I bought 2 clutch cables, one as a spare. I no longer own the tractor and would give someone this cable.....but won't bother shipping it. Pick up in Southwest Missouri. This cable seems to be...

Have been trying to wrap my head around the no. of variants these companies create within Row Crop tractors. Even within the same series, you will have 15 different horsepower models creating a range from 210 to 410. How does someone even decide whether to go for 210 or 230 Hp. At such a high...

Well, the title says it all. I plan to share my story and experience with my F series. This is my first out front mower. Brought home on 3.31.23 Some of my mowing history: Kubota BX 60" MMM 2008 to present Kubota GR2120 2021 to present Kubota Z726X 60" zero-turn for two seasons (sold) I've...