slow

On a 1997 Kubota M5400 with 800 hours. Curl up/down is slow, lift is slow, lower is normal speed, breakout force seems weak too. No leaks or leakdowns. Changing fluid/filters didn't help. I just inherited this very clean tractor and don't know a lot about hydraulics. I presume I should...

2004 ct50u moves slow engine sound fine won’t go up a hill or push anything.

It is now getting down to the mid to low 40's and I am noticing my 7610 to require more cranking time to start. Once it has been running for a while and I turn it off, it starts as it always has. I usually warm up the GP for 12ish seconds. Any thoughts or suggestions? TIA

I know that with just the 1 steering cylinder that the 422 probably does not respond as quickly as other models with dual steering rams, but lately it's becoming less and less responsive. Seems I am turning the steering wheel much more than needed to get to get a response. This is esp...

I bought my BX2660 with about 250 hrs and now it has about 500. Changed the fluids and filters right after purchase. Always been used and parked in a clean environment. It was never what I would call fast, but now, it seems that the ground speed is only about 3mph. Last winter, it seemed...

Early last year I installed the diverter valve sold by Rural King as a kit for my RK37 along with a grapple made by Homestead Implements. Yesterday I removed the grapple and installed a hay spear to move a couple round bales. After spearing the first bale I noticed that the boom lifts fine but...

Hello. I have a 2022 Yanmar SA325 with just at 45 hours presently. Overall, everything has been smooth with the tractor for my usage. This weekend was moving dirt and noticed the "dump" feature (using the bucket....I guess curl feature with other implements) varies in its speed. All other...

Have a 3016hst using it the other day getting garden ready was running fine went and put fuel in it and shut off, once done fueling went to start and acted like battery was dead, tested battery and it was on the weaker side so replaced with new, still the same thing maybe crank one or 2...

Hello, So I have 2013 G3038H tractor with about 1050hrs on it, and the tractor moves so slowly now - in all gears (high, medium and low). Fluid is not very old, and still looks clean. I changed the filter recently and cut it open to see if there was any metal debris in it - but it was clean...