ssqa

Long time lurker. First time posting. I'm having issues with putting SSQA brackets on my tractor. The brackets that I bought offline are to short to fit snug in the plates on the implement. They leave about 1"-2" gap on the bottom when hooked on the implements. I have looked and the plates on my...

I have a 2007 T7 with a Kubota diesel. I bought this from a rental center, so a few issue's with it, not bad. First thing I replaced the old tie rod ends with heim joints I had laying around. These didn't have a zerk fitting, I turned the inside 90 deg then drilled and tapped 1/4-28. You can buy...

Thought I would start a specific post for this to follow my build. Here is where I am at this point. Bought the powertrac adapter plate directly from powertrac. This plate is for a Powertrac 1460: Bought the 3 pt hitch to ssqa adapter from Amazon. Starting to line up the adapter plate to...

Looking for post hole digger and 12 and 24 inch augers. Brush cutter. Concrete mixer. Going to start the pole barn project soon. I am in central Va. If I can't find used PT attachments at a good cash price, I will build an adapter plate and get SSQA attachments. I have a stump grinder and a 4...

Getting ready to convert pin on FEL 4n1 bucket (Wr Long on Kubota B21), which has "hard connected" lines from the solenoid valve to the 4n1 jaw cylinders, to SSQA. Obviously, the thing to do is add QC couplers, And replace the well abused original hoses. I bought it that way, in case you...

I want to use SSQA implements on my Speedco Quick Hitch. I found a unit that costs $1025 but looking for something more affordable. I found chinacrap that cost under $300 but is not QH compatible. There is a plate under the top pin that will not allow the J hook to engage. I found this...

Use your own judgement on if this is a good value, but this is the adapter I bought to convert my PT1430 to skid steer (SSQA). The 1430 plate somewhat fits in the framework without much modification. Later after using, I cut the 3pth hitch top attachment off because when curled back it would...

Looks like it would be handy for grading slopes or crowning a road...

Just converted my Ford 1710 with 770B loader from pin on to quick attach. Also built a quick attach pallet fork frame. Build your own Quick Attach pallet fork frame Build your own Quick Attach pallet fork frame https://youtu.be/iEWQNHtc2SQ Link to adapter specs in the video description

Edit: Looks like a good way to bend a cylinder rod.

Be gentle, this is my first time plowing with my tractor as well as my first time with a fullsize plow. All noob jokes are expected. :) I have an L3560HTC that I've added a 7-foot quick-attach plow to. She looks like this: Yesterday was the first snow and I attempted to use the FEL's "float"...

Finally posting some pics. Sold the old single lid root grapple and fabbed up this twin lid lightweight one more suited to handling logs, firewood, roots, rocks, brush etc. Specs: * AR400 laser cut profiles * 66.5" width, 31" deep bottom, 40" grapple max opening, can hold 20" log when grapple...

DIY My Way, has a series of videos on adding a “from the seat” electrically controlled release/attach system to the SSQA on his Kubota. Looks pretty straight forward to do. Definitely worth looking at, if you have a SSQA system.

I got a really nice used L4850 with FEL last fall, and am totally loving this tractor! However, it has a pin-style loader bucket attachment, and I want to change this to a SSQA, so I can use my nice forks from my skid steer, as well as other attachments. I have a friend who is a union pipe...

Hi! I have a Zetor 4340 with a pin on bucket loader and I want to convert it to SSQA. I would like to buy the tractor end adapter for this if they are available. On the sites that sell these adapters I can’t seem to find anything Zetor specific. I’m thinking the loader may be something generic...

I hope that this thread will continue as others perform maintenance or adjustments on their tractor. Century included. My tractor seemed to be struggling with HP lately. The tractor did not roll on a slight incline as it did in the past. It turns out that the brakes were sticking. I pulled the...