top

Mine broke. Anyone know the best compatible option? The center piece is only ~12" long. Thanks Much, Kevin

Hey all! You guys are going to think this is a really stupid question. BUT I was checking all my fluids today and my 2014 Hustler Raptor SD hydraulic cap says: "Do Not Top Off" It's low on fluid. Does that mean I can't fill the reservoir tank back up to the "fill" line? My tractor/mower...

Typical top&tilt cylinders use a normal Double Pilot-operated check to prevent drift. Dark blue Valve1 in the picture. All these uber-compact double check valves use internal pilots for the obvious reason of size & cost. However, if one exposed the pilots (eg "remote" or "external"), then...

Got my OEM hydraulic top link today. First time getting OEM parts and installing them myself. They came very well packaged and individually wrapped and each bagged labeled. Instructions were decent but didn't need to be too extensive for a top link kit. I found the operation to be smooth and...

Planning on going with Pats for my MF 4243, but I’ve seen where several people talk about needing a longer toplink. I’m also going to be going with a hydraulic toplink. My current toplink is 26” closed. I can’t find a 30” toplink to make up for the additional distance from the Pats. Anyone...

Any recommended brands/models for a hydraulic top link for a 5055E? I'm planning on just connecting it to one of the SCV connections. I'd like to get one with the lock to keep it in position when I'm not adjusting it. Also, is there any concerns with using one with a quick hitch? I may go...

I need to level a 4.5 feet long x 3 foot wide slope leading to my basement steps from the garage. The deep end of the slope is 4.5" the other end is feathered paper thin. According to the directions, Concrete leveler cannot exceed 2" thick unless "extended" with aggregate. I would rather pour...

This is probably a dumb question.....but I don't know the answer so hopefully someone can help me out. I am seriously considering adding Top and Tilt to my Kubota L2501. I used to have a Quick Hitch (triangular frame), but I gave it away because it was so difficult to hook implements up (too...

Does anyone know the correct top link length for a Massey GC2300? I need to replace a missing one on my tractor. Thank you in advance for your help.

I have pondered this a bit. My kioti have 3 holes to adjust/move the base point of the top link (where it connects to the tractor not the implement). I have almost 100% used the bottom hole. I wondered what the other two are primarily used for? I watched a video once and it mentioned the top...

I have a heavy urethane edge I put on my FEL bucket to save scraping on my asphalt driveway during snow removal. My question could be about a broader range of applications, though, for example including tooth bars or edge tamers. I can install the 1/2-13 bolts from the bottom and put the nuts on...

I measured out my manual top link and there don’t seem to be any hydraulic offerings with similar dimensions. Is there a brand/model you T574 owners found to work? Max: 28-3/8” Min: 18-3/8” Bushing bottom: 55mm (2.163”) wide, 19mm (0.75”) pin Bushing top: 42mm (1.653”) wide, 19mm (0.75”)...

Hey I am wondering if there is any advantage to going with FitRite hydraulic top link and waiting 10 weeks vs. buying this WR Long from Messicks? The price seems to be the same. Not sure what the diameter is of the cylinder and rod, and what the stroke is of the one from Messicks, maybe they...

Question for the community. I just had a metal building from Caroline carport that I am going to insulate with 2” 4’x8’ foam board with foil on both sides. It will be enclosed with a garage door and a man door. Along the bottom i plan on putting up 4’x8’ plywood as to have a good wall for...

John Deere 5320. I’ve been threatening to get a hydraulic top link for many years but never think about it unless I’m turning and turning the existing manual link. I want to know which links you all favor and which ones you think are junk, as I only want to do this once (well, twice since I have...

Was wondering if anyone has added hydraulic top link to a YM347, and if so, which kit? Looking over them for my new 347. Thanks!

I bought a used NX5010 with a cab. Top link is missing. Only rear implement I plan on using is a flail mower. Plan on going the tractor supply route to purchase an old fashioned manual top link. What length do you recommend I purchase? Can I go with one that has an opening/closing range of...

At the top of my forums page is the following: [FS] Custom Forum Widget and scrolls thru items for sale. Is this something new that is supposed to be there

Got an EA rock rake a year or so ago. We are all aware of the calamity, so no need to go there. From the git-go, I found there was an issue with the top link mounting design. Otherwise no complaints. Well other that the "special orange paint job". Issue is the Kubota (Gannon) hydraulic top...

Last fall, with a snow storm looming I figured I'd swap out the work lights on the top of the cab to LED's, but upon opening up the top of the cab, I noticed there was a 2nd skin that didn't allow me access to the bolts that the light brackets attach to the tractor with. Not having a barn or...

CK3520se, and after putting on and taking off the brush hog, I’m going hydraulic top link. Is the tractor a CAT 1?

Looking for suggestions on used pro grade, or at least commercial (non-homeowner) top handle saws I have Stihl & Echo dealers and would prefer to stick with them. Not looking for brand warfare. Anyone have actual model they have used a lot and really like? Price is important here. I can’t spend...

I posted this a minute ago but somehow lost it. I hope this does not go in twice. Anyway, my top link is inconveniently short at times - by about 2-3 inches typically. I can make the connection with a bit of hassle and sometimes need to use a lever to lift the back of an implement to tilt it...

Hi I would like to know the proper length of the top link on my JD955. My top link bent and the blade got stuck all the way up (my fault for trying to push instead of pull some dirt). My neighbor stopped by and told me my top link was too long. But, that is the link the came with the tractor...

This was certainly worth the research effort… Besides the hydraulics, I wanted something that would compensate for the Pat’s quick hitch extension, and add a quick-attach to the top. Also, found I can use the inexpensive, locally available, top-link balls by doing a little grinding…

ORDER HERE

I don’t remember who else was looking for info about the Hudraulic Top link for a YT359c… But mine came in.. and was on and working in less than 20 min.. I got it from Agristoreusa .com Top link SKU 06004. 20 7/8 to 31 7/8 I got this length as the 27" max on the factory one was too short with...

I'm unsure of where to tie in the hydraulic hoses for Fit Rite rear remotes on my M62. I've read the thread here originated by RedNeckGeek. His post is helpful, but I don't have factory install instructions, and most of RedNeckGeek's pictures of his install show his initial factory...

I've got a new Kubota MX5400. The top link on the 3-point hitch has a jam nut to keep it from losing adjustment. Does the jam nut just need to be hand-tight, or should more torque be used such as tightening with a wrench?